期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

2020年 第15卷 第2期

摘要

关键词

相关研究

回顶部

《机械工程前沿（英文）》 >> 2020年 第15卷 第2期 doi: 10.1007/s11465-019-0581-7

Two-sided ultrasonic surface rolling process of aeroengine blades based on on-machine noncontact measurement

. Key Laboratory of Pressure Systems and Safety (Ministry of Education) East China University of Science and Technology, Shanghai 200237, China.. AECC Commercial Aircraft Engine Co., Ltd., Shanghai Engineering Research Center for Commercial Aircraft Engine, Shanghai 201108, China

录用日期： 2020-03-31 发布日期： 2020-03-31
HTML16 PDF 15 收藏 0

下一篇 上一篇

摘要

As crucial parts of an aeroengine, blades are vulnerable to damage from long-term operation in harsh environments. The ultrasonic surface rolling process (USRP) is a novel surface treatment technique that can highly improve the mechanical behavior of blades. During secondary machining, the nominal blade model cannot be used for secondary machining path generation due to the deviation between the actual and nominal blades. The clamping error of the blade also affects the precision of secondary machining. This study presents a two-sided USRP (TS-USRP) machining for aeroengine blades on the basis of on-machine noncontact measurement. First, a TS-USRP machining system for blade is developed. Second, a 3D scanning system is used to obtain the point cloud of the blade, and a series of point cloud processing steps is performed. A local point cloud automatic extraction algorithm is introduced to extract the point cloud of the strengthened region of the blade. Then, the tool path is designed on the basis of the extracted point cloud. Finally, an experiment is conducted on an actual blade, with results showing that the proposed method is effective and efficient.

相关研究