[ 1 ] Wolfe RA, Roys EC, Merion RM. Trends in organ donation and transplantation in the United States, 1999–2008. Am J Transplant 2010;10(4 Pt 2):961–2.

[ 2 ] Yeong WY, Chua CK, Leong KF, Chandrasekaran M, Lee MW. Indirect fabrication of collagen scaffold based on inkjet printing technique. Rapid Prototyping J 2006;12(4):229–37. 链接1

[ 3 ] Butscher A, Bohner M, Doebelin N, Hofmann S, Müller R. New depowdering- friendly designs for three-dimensional printing of calcium phosphate bone substitutes. Acta Biomater 2013;9(11):9149–58. 链接1

[ 4 ] Saunders RE, Gough JE, Derby B. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing. Biomaterials 2008;29 (2):193–203. 链接1

[ 5 ] Xu T, Zhao W, Zhu JM, Albanna MZ, Yoo JJ, Atala A. Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. Biomaterials 2013;34(1):130–9. 链接1

[ 6 ] Derby B. Printing and prototyping of tissues and scaffolds. Science 2012;338 (6109):921–6. 链接1

[ 7 ] Wang K, Ho CC, Zhang C, Wang B. A review on the 3D printing of functional structures for medical phantoms and regenerated tissue and organ applications. Engineering 2017;3(5):653–62. 链接1

[ 8 ] Zhao Y, Yao R, Ouyang L, Ding H, Zhang T, Zhang K, et al. Three-dimensional printing of Hela cells for cervical tumor model in vitro. Biofabrication 2014;6 (3):035001. 链接1

[ 9 ] Yap YL, Tan YSE, Tan HKJ, Zhen KP, Xue YL. 3D printed bio-models for medical applications. Rapid Prototyping J 2017;23(2):227–35. 链接1

[10] Mogali SR, Yeong WY, Tan H, Tan GJS, Abrahams PH, Zary N, et al. Evaluation by medical students of the educational value of multi-material and multi-colored three-dimensional printed models of the upper limb for anatomical education. Anat Sci Educ 2018;11(1):54–64. 链接1

[11] Altamimi AA, Fernandes PRA, Peach C, Cooper G, Diver C. Metallic bone fixation implants: a novel design approach for reducing the stress shielding phenomenon. Vitr Phys Prototyping 2017;12(2):141–51. 链接1

[12] Zhang Y, Yang Z, Li X, Chen Y, Zhang S, Du M, et al. Custom prosthetic reconstruction for proximal tibial osteosarcoma with proximal tibiofibular joint involved. Surg Oncol 2008;17(2):87–95. 链接1

[13] Galasso O, Mariconda M, Brando A, Iannò B. Disassembly of a distal femur modular prosthesis after tumor resection. J Arthroplasty 2010;25(2):334.e5–9. 链接1

[14] Winder J, Cooke RS, Gray J, Fannin T, Fegan T. Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. J Med Eng Technol 1999;23(1):26–8. 链接1

[15] Bian WG, Lei P, Liang FH, Bone XuHZ. morphogenetic protein-2 and gel complex on hydroxyapatite-coated porous titanium to repair defects of distal femur in rabbits. Chin J Orthop Trauma 2007;9(6):550–4. Chinese.

[16] Sing SL, Wang S, Agarwala S, Wiria FE, Ha TMH, Yeong WY. Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion. Int J Bioprinting 2017;1(3):65–71. 链接1

[17] Sánchez-Salcedo S, Colilla M, Izquierdo-Barba I, Vallet-Regí M. Preventing bacterial adhesion on scaffolds for bone tissue engineering. Int J Bioprinting 2016;2(1):20–34. 链接1

[18] Zong QG, Yuan CJ, Wang YF, Su ZP. Design and preparation of biocompatible zwitterionic hydroxyapatite. J Mater Chem B 2013;1(11):1595–606.

[19] Izquierdo-Barba I, García-Martín JM, Álvarez R, Palmero A, Esteban J, Pérez- Jorge C, et al. Nanocolumnar coatings with selective behavior towards osteoblast and Staphylococcus aureus proliferation. Acta Biomater 2015;15:20–8. 链接1

[20] Langer R, Vacanti JP. Tissue engineering. Science 1993;260(5110):920–6.

[21] Li S, Qian T, Wang X, Liu J, Gu X. Noncoding RNAs and their potential therapeutic applications in tissue engineering. Engineering 2017;3(1):3–15. 链接1

[22] Billiet T, Vandenhaute M, Schelfhout J, Van Vlierberghe S, Dubruel P. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 2012;33(26):6020–41. 链接1

[23] Jia A, Teoh JEM, Suntornnond R, Chua CK. Design and 3D printing of scaffolds and tissues. Engineering 2015;1(2):261–8. 链接1

[24] Mosadegh B, Xiong G, Dunham S, Min JK. Current progress in 3D printing for cardiovascular tissue engineering. Biomed Mater 2015;10(3):034002. 链接1

[25] Ng WL, Wang S, Yeong WY, Naing MW. Skin bioprinting: impending reality or fantasy? Trends Biotechnol 2016;34(9):689–99. 链接1

[26] Hutmacher DW. Scaffolds in tissue engineering bone and cartilage. Biomaterials 2000;21(24):2529–43. 链接1

[27] Pan T, Cao X. Progress in the development of hydrogel-rapid prototyping for tissue engineering. Mater Chin 2015;34(3):236–45. Chinese.

[28] Ozbolat IT, Hospodiuk M. Current advances and future perspectives in extrusion-based bioprinting. Biomaterials 2016;76(37):321–43. 链接1

[29] Gudapati H, Dey M, Ozbolat I. A comprehensive review on droplet-based bioprinting: past, present and future. Biomaterials 2016;102:20–42. 链接1

[30] Ng WL, Lee JM, Yeong WY, Win Naing M. Microvalve-based bioprinting— process, bio-inks and applications. Biomater Sci 2017;5(4):632–47. 链接1

[31] Koch L, Brandt O, Deiwick A, Chichkov B. Laser assisted bioprinting at different wavelengths and pulse durations with a metal dynamic release layer: a parametric study. Int J Bioprinting 2017;3(1):42–53. 链接1

[32] Fedorovich NE, Schuurman W, Wijnberg HM, Prins HJ, van Weeren PR, Malda J, et al. Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. Tissue Eng Part C Methods 2012;18(1):33–44. 链接1

[33] Gauvin R, Chen YC, Lee JW, Soman P, Zorlutuna P, Nichol JW, et al. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. Biomaterials 2012;33(15):3824–34. 链接1

[34] Lam CXF, Mo XM, Teoh SH, Hutmacher DW. Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng C 2002;20(1):49–56. 链接1

[35] Chen L, Zhu WM, Fei ZQ, Chen JL, Xiong JY, Zhang JF, et al. The study on biocompatibility of porous nHA/PLGA composite scaffolds for tissue engineering with rabbit chondrocytes in vitro. Biomed Res Int 2013;2013:412745. 链接1

[36] Hutmacher DW, Schantz T, Zein I, Ng KW, Teoh SH, Tan KC. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res 2001;55 (2):203–16. 链接1

[37] Fisher JP, Vehof JWM, Dean D, van der Waerden JP, Holland TA, Mikos AG, et al. Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. J Biomed Mater Res 2002;59(3):547–56. 链接1

[38] Williams JM, Adewunmi A, Schek RM, Flanagan CL, Krebsbach PH, Feinberg SE, et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 2005;26(23):4817–27. 链接1

[39] Zhang L. Fabrication and fundamental research of multi-branched blood vessel scaffolds with multi-layered wall [dissertation]. Beijing: Tsinghua University; 2006.

[40] Kim SS, Utsunomiya H, Koski JA, Wu BM, Cima MJ, Sohn J, et al. Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. Ann Surg 1998;228 (1):8–13. 链接1

[41] Pati F, Jang J, Ha DH, Won Kim S, Rhie JW, Shim JH, et al. Printing three- dimensional tissue analogues with decellularized extracellular matrix bioink. Nat Commun 2014;5:3935. 链接1

[42] Martin I, Wendt D, Heberer M. The role of bioreactors in tissue engineering. Trends Biotechnol 2004;22(2):80–6. 链接1

[43] Stephens JS, Cooper JA, Phelan Jr FR, Dunkers JP. Perfusion flow bioreactor for 3D in situ imaging: investigating cell/biomaterials interactions. Biotechnol Bioeng 2007;97(4):952–61. 链接1

[44] Hong S, Sycks D, Chan HF, Lin S, Lopez GP, Guilak F, et al. 3D printing of highly stretchable and tough hydrogels into complex, cellularized structures. Adv Mater 2015;27(27):4035–40. 链接1

[45] Hockaday LA, Kang KH, Colangelo NW, Cheung PYC, Duan B, Malone E, et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication 2012;4(3):035005. 链接1

[46] Xue SH, Wang Y, Zhao Y, Zhang T, Lin F, Sun W, et al. Preliminary study on three dimensional bioprinting of human dental pulp cells. Sci Tech Eng 2012;12(17):4103–7.

[47] Cohen DL, Lipton JI, Bonassar LJ, Lipson H. Additive manufacturing for in siturepair of osteochondral defects. Biofabrication 2010;2(3):035004. 链接1

[48] Cui X, Breitenkamp K, Finn MG, Lotz M, D’Lima DD. Direct human cartilage repair using three-dimensional bioprinting technology. Tissue Eng Part A 2012;18(11–12):1304–12. 链接1

[49] Liu Y, Zhou G, Cao Y. Recent progress in cartilage tissue engineering—our experience and future directions. Engineering 2017;3(1):28–35. 链接1

[50] Gratson GM, Xu M, Lewis JA. Microperiodic structures: direct writing of three- dimensional webs. Nature 2004;428(6981):386. 链接1

[51] Ivirico JLE, Bhattacharjee M, Kuyinu E, Nair LS, Lauencin CT. Regenerative engineering for knee osteoarthritis treatment: biomaterials and cell-based technologies. Engineering 2017;3(1):16–27. 链接1

[52] Wu C, Luo Y, Cuniberti G, Xiao Y, Gelinsky M. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomater 2011;7(6):2644–50. 链接1

[53] Arakaki K, Kitamura N, Fujiki H, Kurokawa T, Iwamoto M, Ueno M, et al. Artificial cartilage made from a novel double-network hydrogel: in vivo effects on the normal cartilage and ex vivo evaluation of the friction property. J Biomed Mater Res A 2010;93(3):1160–8. 链接1

[54] Kirschner CM, Anseth KS. Hydrogels in healthcare: from static to dynamic material microenvironments. Acta Mater 2013;61(3):931–44. 链接1

[55] Ronken S, Wirz D, Daniels AU, Kurokawa T, Gong JP, Arnold MP. Double- network acrylamide hydrogel compositions adapted to achieve cartilage-like dynamic stiffness. Biomech Model Mechanobiol 2013;12(2):243–8. 链接1

[56] Sharma B, Fermanian S, Gibson M, Unterman S, Herzka DA, Cascio B, et al. Human cartilage repair with a photoreactive adhesive-hydrogel composite. Sci Transl Med 2013;5(167):167ra6. 链接1

[57] Sun JY, Zhao X, Illeperuma WR, Chaudhuri O, Oh KH, Mooney DJ, et al. Highly stretchable and tough hydrogels. Nature 2012;489(7414):133–6. 链接1

[58] Gong JP. Why are double network hydrogels so tough? Soft Matter 2010;6 (12):2583–90. 链接1

[59] Sherwood JK, Riley SL, Palazzolo R, Brown SC, Monkhouse DC, Coates M, et al. A three-dimensional osteochondral composite scaffold for articular cartilage repair. Biomaterials 2002;23(24):4739–51. 链接1

[60] Cui T, Yan Y, Zhang R, Liu L, Xu W, Wang X. Rapid prototyping of a double-layer polyurethane-collagen conduit for peripheral nerve regeneration. Tissue Eng Part C Methods 2009;15(1):1–9. 链接1

[61] Qin L, Li DC, Cheng C, Zhang WJ, Liu YX. Tissue-engineered soft tissue oriented manufacturing technologies and additive manufacturing. Chin J Tissue Eng Res 2014;18(8):1263–9. Chinese.

[62] Mironov V, Kasyanov V, Markwald RR. Organ printing: from bioprinter to organ biofabrication line. Curr Opin Biotechnol 2011;22(5):667–73. 链接1

[63] Kolesky DB, Truby RL, Gladman AS, Busbee TA, Homan KA, Lewis JA. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv Mater 2014;26(19):3124–30. 链接1

[64] Michael S, Sorg H, Peck CT, Koch L, Deiwick A, Chichkov B, et al. Tissue engineered skin substitutes created by laser-assisted bioprinting form skin- like structures in the dorsal skin fold chamber in mice. PLoS One 2013;8(3): e57741. 链接1

[65] Mannoor MS, Jiang Z, James T, Kong YL, Malatesta KA, Soboyejo WO, et al. 3D printed bionic ears. Nano Lett 2013;13(6):2634–9. 链接1

[66] Yang Y, Wang K, Gu X, Leong KW. Biophysical regulation of cell behavior-cross talk between substrate stiffness and nanotopography. Engineering 2017;3 (1):36–54. 链接1

[67] Wang M, Wu Y, Lu S, Chen T, Zhao Y. Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design. Prog Nat Sci-Mater Int 2016;26 (6):671–7. 链接1

[68] Fischer M, Joguet D, Robin G, Peltier L, Laheurte P. In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders. Mater Sci Eng C Mater Biol Appl 2016;62 (2):852–9. 链接1

[69] Sing SL, Yeong WY, Wiria FE. Selective laser melting of titanium alloy with 50 wt% tantalum: microstructure and mechanical properties. J Alloys Compd 2016;660:461–70. 链接1

[70] Sing SL, Wiria FE, Yeong WY. Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behavior. Robot Cim-Int Manuf 2018;49:170–80. 链接1

[71] Speirs M, Van Hooreweder B, Van Humbeeck J, Kruth JP. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison. J Mech Behav Biomed Mater 2017;70:53–9. 链接1

[72] Yang Y, Wu P, Lin X, Liu Y, Bian H. System development, formability quality and microstructure evolution of selective laser-melted magnesium. Virt Phys Prototyping 2016;11(3):1–9. 链接1

[73] Lu Y, Ren L, Wu S, Yang C, Lin W. CoCrWCu alloy with antibacterial activity fabricated by selective laser melting: densification, mechanical properties and microstructural analysis. Powder Technol 2018;325:289–300. 链接1

[74] Lu Y, Ren L, Xu X, Yang Y, Wu S, Luo J, et al. Effect of Cu on microstructure, mechanical properties, corrosion resistance and cytotoxicity of CoCrW alloy fabricated by selective laser melting. J Mech Behav Biomed Mater 2018;81:130–41. 链接1

[75] Xu T, Binder KW, Albanna MZ, Dice D, Zhao W, Yoo JJ, et al. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications. Biofabrication 2013;5(1):015001. 链接1

[76] Yue J, Zhao P, Gerasimov JY, Marieke VDL, Grotenhuis A. 3D-printable antimicrobial composite resins. Adv Funct Mater 2015;25(43):6756–67. 链接1

[77] Pistone A, Iannazzo D, Espro C, Galvagno S, Tampieri A. Tethering of Gly-Arg- Gly-Asp-Ser-Pro-Lys peptides on Mg-doped hydroxyapatite. Engineering 2017;3(1):55–9. 链接1

[78] Jia MA, Zhao Y, Wang X, Liu L, Qin H, Li M. A study on the chondrogenesis of collagen gel containing rapid prototyping PLGA and chon-drocytes in vivo. J Practical Stomatol 2009;25(1):9–12.

[79] Wu G. Preparation of 3D printed porous hydroxyapatite scaffold coated with collagen/rhBMP-2 chitosan microspheres and ectopic bone formation investigation in vivo [dissertation]. Beijing: Peking Union Medical College Hospital; 2015. Chinese.

[80] Sing SL, Yeong WY, Wiria FE, Tay BY, Zhao Z. Direct selective laser sintering and melting of ceramics: a review. Rapid Prototyping J 2017;23 (3):611–23. 链接1

[81] Trombetta R, Inzana JA, Schwarz EM, Kates SL, Awad HA. 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery. Ann Biomed Eng 2017;45(1):23–44. 链接1

[82] Song C. Study on digital and direct manufacturing of customized implant based on selective laser melting [dissertation]. Guangzhou: South China University of Technology; 2014. Chinese.

[83] Lee AY, Jia A, Chua CK. Two-way 4D printing: a review on the reversibility of 3D-printed shape memory materials. Engineering 2017;3 (5):663–74. 链接1

[84] Quan W. 3D-printed alginate/hydroxyapatite hydrogel in combination of Atsttrin to repair bone defects [dissertation]. Hangzhou: Zhejiang University; 2015. Chinese.

[85] Yan Y, Li S, Xiong Z, Wang XH, Zhang T, Zhang RJ. Fabrication technology of tissue engineering scaffold based on rapid prototyping. J Mech Eng 2010;46 (5):93–8.

[86] McGuigan AP, Sefton MV. Design criteria for a modular tissue-engineered construct. Tissue Eng 2007;13(5):1079–89. 链接1

[87] Chai G, Zhang Y, Liu QH, Ma SX, Hu QX, Cui L, et al. A pilot study of three dimensional printing of human bone marrow stem cells (hBMSCs). Shanghai J Stomatol 2010;19(1):77–80. Chinese. 链接1

[88] Mironov V, Drake C, Wen X. Research project: Charleston bioengineered kidney project. Biotechnol J 2006;1(9):903–5. 链接1