Frontiers of Structural and Civil Engineering
>> 2020,
Volume 14,
Issue 5
doi:
10.1007/s11709-020-0662-z
RESEARCH ARTICLE
Punching of reinforced concrete slab without shear reinforcement: Standard models and new proposal
Department of Civil, Environmental Engineering and Architecture, University of Cagliari, Cagliari 09123, Italy
Received: 2020-08-31
Accepted: 2020-09-28
Available online: 2020-09-28
Next
Previous
Abstract
Reinforced concrete (RC) slabs are characterized by reduced construction time, versatility, and easier space partitioning. Their structural behavior is not straightforward and, specifically, punching shear strength is a current research topic. In this study an experimental database of 113 RC slabs without shear reinforcement under punching loads was compiled using data available in the literature. A sensitivity analysis of the parameters involved in the punching shear strength assessment was conducted, which highlighted the importance of the flexural reinforcement that are not typically considered for punching shear strength. After a discussion of the current international standards, a new proposed model for punching shear strength and rotation of RC slabs without shear reinforcement was discussed. It was based on a simplified load-rotation curve and new failure criteria that takes into account the flexural reinforcement effects. This experimental database was used to validate the approaches of the current international standards as well as the new proposed model. The latter proved to be a potentially useful design tool.
京公网安备 11010502051620号
