2003, Volume 5, Issue 12
Strategic Study of CAE >> 2003, Volume 5, Issue 12
Development and Experiment Research of the Postprocessor for Parallel Kinematic Machine Tools
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China
Next Previous
Abstract
Based on the structure of 6 - TPS parallel kinematic machine tools (PKMTs) with 6 degrees of freedom (DOF), the theory and procedure to generate control data is introduced. On the basis of above analysis, the functions and framework of a postprocessor for this type of machine tools is designed. Some important methods for carrying out the postprocessing of the machine are researched and demonstrated, including inner data transfer protocol by parameterized binary data, interpolating algorithm in Descartes coordinate system, planar and spatial tool radius compensation, preprocessing of cutter location data, and word and syntax check of machining codes. Finally, a real machining experiment on the system mentioned above is introduced. The result shows that it can be successfully used in real manufacturing environment.
Figures
图1
图10
图11
图12
图13
图2
图3
图4
图5
图6
图7
图8
图9
References
[ 1 ] TlustyJ, ZiegertJ , RidgewayS .Fundamentalcomparisonoftheuseofserialandparallelkinematicsformachinestools[J].AnnalsoftheCIRP , 1999, 48 (1) :351～356
[ 2 ] RehsteinerF , NeugebauerR , SpiewakS , etal.Puttingparallelkinematicsmachines (PKM ) toproductivework[J].AnnalsoftheCIRP , 1999, 48 (1) :345～351
[ 3 ] ChenSL , LiuYC .Post processordevelopmentofasixdegrees of freedom parallel linkmachinetool[J].TheInternationalJournalofAdvancedManufacturingTechnology, 2001, 18 (4) :254～265 link1
[ 4 ] 李铁民, 汪劲松, 杨向东, 等.基于Stewart平台数控机床的轨迹规划研究[J].中国机械工程, 1999, 10 (10) :1118～1120 link1
[ 5 ] 李铁民, 郑浩峻, 汪劲松, 等.并联机床不同位形下的运动精度评价指标[J].机械工程学报, 2002, 38 (9) :101～105 link1
[ 6 ] 李铁民, 郑浩峻, 汪劲松, 等.并联机床后置处理算法及系统[J].机械工程学报, 2002, 38 (12) :44～48 link1
[ 7 ] 杨向东, 李铁民, 魏永明, 等.六自由度虚拟轴机床预处理算法研究及系统建造[J].中国机械工程, 1998, 9 (5) :82～86 link1
[ 8 ] 李铁民, 郑浩峻, 王立平.并联机床的刀位文件预处理[J].工具技术, 2002, (9) :6～9 link1
[ 9 ] 李铁民.并联机床后置处理器的研究[D].北京:清华大学, 2000
京公网安备 11010502051620号
