2007, Volume 9, Issue 10
Strategic Study of CAE >> 2007, Volume 9, Issue 10
Study on TA2 Sheet Metal Bending With Thermal Stress Induced by Laser and Its Mechanical Properties
1. School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China;
2. Yangzhou Polytechnic College, Yangzhou, Jiangsu 225509, China
Next Previous
Abstract
A 2. 5 kW CO2 laser, a HVS-1000 Micro-hardness measuring instrument and an X-350A X-ray stress measuring instrument were adopted in the experiment where 0. 6mm-thickn sheet steel of TA2 was studied to evaluate the process parameters of bending with thermal stress induced by laser. Bending angle was measured as the function of main processing parameters. These processing parameters were arranged according to the theory of orthotropic experiment. Distribution of residual stress on the surface and variation of micro-hardness on the cross section of samples were studied after forming. The results show that these parameters bring different effects. The number of passes ranks first, followed by laser spot in terms of their effect on the bending angle, with power of laser beam and scan speed being the last two factors. Parameters of laser forming also have some influence on the distribution of residual stress on the surface of samples. Certain regularity appears in the variation of micro-hardness on the cross section of samples.
Keywords
laser technology ; thermal stress ; sheet metal bending ; residual stress ; micro-hardness
Figures
图1
图2
图3
图4
图5
References
[ 1 ] Namba Y.Laser forming in space [ A] .Int Conf On Lasers’ 85 [ C] .Japan:Osaka Univ,1986.403 ~407
[ 2 ] Vollertsen F.An analytical model for laser bending [ J] .Lasers in Engineering,1994 ,( 2 ) : 261 ~276 link1
[ 3 ] 张永康,周建忠,叶云霞.激光加工技术[M].北京:化学工业出版社,2004.235~238
[ 4 ] Chen D J, Xiang Y B, Wu S C, et al.Application of fuzzy-neural network to laser bending process of sheet metal [ J] .Mater Sci Technol, 2002 , 18 ( 6 ) : 677 ~680 link1
[ 5 ] Chan K C, Harada Y, Liang J, et al.Deformation behaviour of chromium sheets in mechanical and laser bending [ J ] .Mater Process Technol, 2002 , 122 ( 2 ,3 ) : 272 ~277 link1
[ 6 ] 李纬民.金属板材激光弯曲成形规律的研究[J].中国激光,1998,25(9):860~864 link1
[ 7 ] Cheng J G, Yao Y L.Process synthesis of laser forming by genetic algorithm [ J] .International Journal of Machine Tools & Manu-facture, 2004 ,44 :1619 ~1628 link1
[ 8 ] 廖永平,严擎宇.正交试验法在机械工业中
京公网安备 11010502051620号
