[ 1 ] 马鸣图，易红亮，路洪洲，等. 论汽车轻量化[J]. 中国工程科学， 2009，11（9）：20-27. link1

[ 2 ] 马鸣图. 先进的汽车用钢 [M]. 北京：化学工业出版社，2008.

[ 3 ] 马鸣图，吴宝榕. 双相钢物理和力学冶金[M]. 2版. 北京：冶金 工业出版社，2010.

[ 4 ] Ohjoon Kwon. New product development and EVI activity at POSCO[R]. Seoul：POSCO，2012.

[ 5 ] Haldar A，Suwas S，Bhattacharjee D. Microstructure and Texture in Steels [M]. London：Springer，2009：185-205.

[ 6 ] Yi Hongliang. δ- TRIP steel[D]. Pohang：Pohang University of Science and Technology，2010.

[ 7 ] Zackay V F，Parker E R，Fahr D，et al. The enhancement of ductility in high strength steels [J]. Transactions of the American Society of Metals，1967，60：252-259.

[ 8 ] Matsumura O，Sakuma Y，Takechi H. TRIP and its kinetic aspects in austempered 0.4C-1.5Si-0.8Mn steel [J]. Scripta Metallurgica，1987，27：1301-1306. link1

[ 9 ] Matsumura O，Sakuma Y，Takechi H. Enhacement of elongation by retained austenite in intercritical annealed 0.4C- 1.5Si- 0.8Mn steel [J]. Transactions ISIJ，1987，27：570-579. link1

[10] Sakuma Y，Matlock D K，Krauss G. Intercritically annealed and isothermally transformed 0.15Pct C steels containing 1.2 Pct Si-1.5Pct Mn and 4 Pct Ni：Part 2. Effect of testing temperature on stress-strain behavior and deformation-induced austenite transformation [J]. Metallurgical and Materials Transactions A， 1992，23：1233-1241. link1

[11] Sugimoto K I，Misu M，Kobayashi M，et al. Effects of second phase morphology on retained austenite morphology and tensile properties in a TRIP-aided dual-phase steel sheet [J]. ISIJ International，1993，33：775-782. link1

[12] Sugimoto K I，Usui N，Kobayashi M，et al. Effects of volume fraction and stability of retained austenite on ductility of TRIPaided dual-phase steels [J]. ISIJ International，1992，32：1311- 1318. link1

[13] Girault E，Martens A，Jacques P，et al. Comparison of the effects of silicon and aluminium on the tensile behavior of multiphase TRIP- assisted steels [J]. Scripta Materialia，2001，44： 885-892. link1

[14] Speer J G，Matlock D K，De Cooman B C，et al. Carbon partitioning into austenite after martensite transformation [J]. Acta Materialia，2003，51：2611-2622. link1

[15] Speer J G，Edmonds D V，Rizzo F C，et al. Matlock，partitioning of carbon from supersaturated plates of ferrite，with application to steel processing and fundamentals of the bainite transformation [J]. Current Opinion in Solid State and Materials Science，2004，8：219-237. link1

[16] Bhadeshia H K D H. Bainite in Steels [M]. UK Cambrige：IOM Communications Ltd，2001.

[17] Caballero F G，Bhadeshia H K D. Very strong bainite [J]. Current Opinion in Solid State and Materials Science，2004，8： 251-257. link1

[18] Niikura M，Morris J W. Thermal processing of ferritic 5Mn steel for toughness at cryogenic temperatures [J]. Metallurgical and Materials Transactions A，1980，11（9）：1531-1540. link1

[19] Shi Jie，Sun Xinjun，Wang Maoqiu，et al. Enhanced work-hardening behavior and mechanical properties in ultrafine- grained steels with large-fractioned metastable austenite [J]. Scripta Materialia，2010，63（8）：815-818. link1

[20] Wang Chang，Shi Jie，Wang Cunyu，et al. Development of ultrafine lamellar ferrite and austenite duplex structure in 0.2C5Mn steel during ART- annealing [J]. ISIJ International， 2011，51（4）：651-656. link1

[21] Chatterjee S，Murugananth M，Bhadeshia H K D H. δ- TRIP steel [J]. Materials Science and Technology，2007，23（7）： 819-827. link1

[22] Yi H L，Lee K Y，Bhadeshia H K D H. Extraordinary ductility in Al-bearing Delta-TRIP steel [J]. Proceedings of the Royal Society A，2011，467：234-243. link1

[23] Yi H L，Lee K Y，Bhadeshia H K D H. Mechanical stabilisation phenomenon of retained austenite in δ-TRIP steel [J]. Materials Science and Engineering：A，2011，528：5900-5903. link1

[24] Yi H L，Ryu J H，Bhadeshia H K D H，et al. Low- alloy duplex，directly quenched transformation-induced plasticity steel [J]. Scripta Materialia，2011，65（7）：604-607. link1

[25] Yi H L，Ghosh S K，Liu W J，et al. Non-equilibrium solidification and ferrite in δ-TRIP steel [J]. Materials Science & Technology，2010，26：817-823. link1

[26] Yi H L，Lee K Y，Bhadeshia H K D H. Stabilisation of ferrite in hot rolled δ-TRIP steel [J]. Materials Science &Technology， 2011，27：525-529. link1

[27] Yi H L，Lee K Y H，Bhadeshia K D H. Spot weldability of δ- TRIP steel containing 0.4 wt % C [J]. Science and Technology of Welding & Joining，2010，15（7）：619-624. link1

[28] Sakuma Y，Matsumara O，akechi H. Mechanical properties and retained austenite in intercritically heat- treated bainite- transformed steel and their variation with Si and Mn additions [J]. Metallurgical and Materials Transactions A，1991，22：489- 498. link1

[29] Sakuma Y，Matsumura O，Akisue O. Influence of C content and annealing temperature on microstructure and mechanical properties of 400 ℃ transformed steel containing retained austenite [J]. ISIJ International，1991，31：1348-1353. link1

[30] Chatterjee S，Wang H S，Yang J R，et al. Mechanical stabilisation of austenite[J]. Materials Science and Technology，2006，22 （6）：641-644. link1

[31] Peterson W，Borchelt J. Maximizing cross tension impact properties of spot welds in 1.5 mm low carbon，Dual- phase，and Martensitic Steels [J]. SAE Technical Paper Series，SAE 2000- 01-2680. link1

[32] Pouranvari M，Marashi S P H，Safanama D S. Failure mode transition in AHSS resistance spot welds，Part II：Experimental investigation and model validation’[J]. Materials Science and Engineering：A，A，2011，528（29-30）：8344-8352. link1

[33] Santella M L，Babu S S，Riemer B W，et al. Influence of microstructure on the properties of resistance spot welds[R]. USA： Oak Ridge National Lab，TN，1998.

[34] Nishi T，Saito T，Yamada A. Valuation of spot weldability of high strength sheet steels for automobile use[J]. Nippon Steel Technical Report，1982（20）：37-44.

[35] Khan M I，Kuntz M L，Zhou Y. Effects of weld microstructure on static and impact performance of resistance spot welded joints in advanced high strength steels[J]. Immunology Endocrine and Metabolic Agents inMedicinal Chemistry，2008（2）： 294-304. link1

[36] Nayak S S，Baltazar Hernandez V H，Okita Y，et al. Microstructure-hardness relationship in the fusion zone of TRIP steel welds[J]. Materials Science and Engineering：A，2012，551： 73-81. link1

[37] Radakovic D J，Tumuluru M. An Evaluation of the cross-tension test of resistance spot welds in high- strength dual- phase steels[J]. Welding Journal，2012，91（1）：8-15. link1

[38] Pouranvari M. Susceptibility to interfacial failure mode in similar and dissimilar resistance spot welds of DP600 dual phase steel and low carbon steel during cross-tension and tensile-shear loading conditions[J]. Materials Science and Engineering：A， 2012，546：129-138.

[39] Joaquin A，Elliott A N A，Jiang C. Reducing shrinkage voids in resistance spot welds[J]. Welding Journal-New York，2007，86 （2）：24. link1

[40] Sakuma Y，Oikawa H. Factors to determine static strengths of spot- weld for high- strength steel sheets and developments of high-strength steel sheets with strong and stable welding characteristics[J]. Shinnittetsu Giho，2003，378：30-34. link1