期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

2008年 第2卷 第1期

摘要

关键词

相关研究

回顶部

《化学科学与工程前沿（英文）》 >> 2008年 第2卷 第1期 doi: 10.1007/s11705-008-0007-2

Bio-modification of eucalyptus chemithermomechanical pulp

1.State Key Laboratory of Pulp & Paper Engineering, South China University of Technology; Pulp & Paper Institute of Guangxi University; 2.State Key Laboratory of Pulp & Paper Engineering, South China University of Technology; 3.Pulp & Paper Institute of Guangxi University; 4.Department of Chemical Engineering and Limerick Pulp and Paper Centre, University of New Brunswick;

发布日期： 2008-03-05
HTML13 PDF 1 收藏 0

下一篇 上一篇

摘要

Eucalyptus chemithermomechanical pulp (CTMP) was modified with the white-rot fungus 19-6 in a stationary culture condition. Different factors that influence the effect of white-rot fungus treatment, including additional nutrition, pH value, temperature, treatment time and oxygen input were investigated. The results show that the energy consumption of post refining of CTMP treated by white-rot fungus 19-6 was lower than that of untreated pulp and the strength properties also obviously improved. At a freeness level of about 330 mL, compared to the untreated pulp, the tensile index, tear index and internal bonding strength increased by 21.3%, 27.4% and 33.1%, respectively. Unfortunately, the treatment with white-rot fungus substantially decreased all optical properties except for opacity, which was essentially unchanged. Brightness and light scattering coefficient were reduced to as much as 25% and 21% compared to the untreated pulps. However, after a tow-stage “NaSO–HO” bleaching, the final brightness can reach 70.3% ISO, which is similar to that of the untreated CTMP.

相关研究