期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

《化学科学与工程前沿(英文)》 >> 2010年 第4卷 第4期 doi: 10.1007/s11705-010-0517-6

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

1. State Key Laboratory of Chemical Engineering, Engineering Research Center of Large Scale Reactor Engineering and Technology, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China; 2. Department of Light Chemistry and Environment Engineering, Shandong Institute of Light Industry, Jinan 250353, China

发布日期: 2010-12-05

下一篇 上一篇

摘要

The recent studies of direct alcohol/ether synthesis process in slurry reactors were reviewed, and the research work in our laboratory was carried out in this paper. a global kinetics model for direct dimethyl ether (DME) synthesis from syngas over a novel Cu-Zn-Al-Zr slurry catalyst was established according to the total of 25 experimental data, and a steady-state one-dimensional mathematical model was further developed in bubble column slurry reactor (BCSR), which was assumed that the bubble phase was plug flow, and the liquid phase was fully mixed flow. The numerical simulations of reactor design of 100000 t/a dimethyl ether pilot plant indicate that higher pressure and lower temperature were favorable to the increase of CO conversion, selectivity of dimethyl ether, product yield and height of slurry bed. The optimal operating conditions for DME synthesis process were obtained: reaction temperature at 240°C, reactor pressure at 5 MPa and reactor diameter of 2.5 m.

相关研究