RESEARCH ARTICLE
Industrial bio-based plant aggregates as hygric and insulating construction materials for energy efficient building
. BRE Centre for Innovative Construction Materials, Department of Architecture and Civil Engineering, University of Bath, Bath, BA2 7AY, UK.. Hub for Biotechnology in the Built Environment, Department of Applied Sciences, Faculty of Health and Life Sciences, Northumbria University, Newcastle-upon-Tyne, NE1 8ST, UK.. Key Laboratory of Industrial Fermentation Microbiology, Tianjin University of Science and Technology, Tianjin Economic and Technological Development Area (TEDA), Tianjin 300457, China
录用日期：
2020-09-18
发布日期：
2020-09-18
摘要
In this paper, the bulk density, microstructure, porosity and pore size distribution of the selected aggregates, including hemp shiv, flax shiv, rape shiv and wheat straw, are fully studied due to these properties are highly related to their excellent characteristics and more or less linked to the properties of the final product. The scanning electron microscope results showed all the selected aggregates have a highly porous and complex hierarchical structure, whereas the arrangement of pores and the thickness of cell wall are significantly different among these aggregates. All the selected aggregates had a low bulk density ranging from 30 to 130 kg∙m and a high porosity between 75.81% and 88.74%. The thermal conductivity of the selected bio-aggregates ranged from 0.04 to 0.06 W∙m ∙K . The thermal conductivity of the selected aggregates was not only depending on the bulk density of the sample but also depending on the raw material. Hemp shiv, rape shiv and flax shiv were excellent hygric regulators with moisture buffer value ( ) ranging from 2.07 to 2.36 g∙m ∙%RH , whereas, wheat straw had a lower MBV value ranging from 1.76 to 1.97 g∙m ∙%RH . The results showed that particle size does not affect the value. The value increases linearly with bulk density.
京公网安备 11010502051620号
