期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

《能源前沿(英文)》 >> 2021年 第15卷 第1期 doi: 10.1007/s11708-018-0583-x

Core designing of a new type of TVS-2M FAs: neutronics and thermal-hydraulics design basis limits

. Department of Nuclear Engineering, School of Mechanical Engineering, Shiraz University, Shiraz 71936-16548, Iran.. Department of Nuclear Engineering, School of Mechanical Engineering, Shiraz University, Shiraz 71936-16548, Iran; Radiation Research Center, Shiraz University, Shiraz 71936, Iran; Lonizing and Non-lonizing Radiation Center, Shiraz University of Medical Science, Shiraz, Iran

录用日期: 2018-09-21 发布日期: 2018-09-21

下一篇 上一篇

摘要

One of the most important aims of this study is to improve the core of the current VVER reactors to achieve more burn-up (or more cycle length) and more intrinsic safety. It is an independent study on the Russian new proposed FAs, called TVS-2M, which would be applied for the future advanced VVERs. Some important aspects of neutronics as well as thermal hydraulics investigations (and analysis) of the new type of Fas are conducted, and results are compared with the standards PWR CDBL. The TVS-2M FA contains gadolinium-oxide which is mixed with UO (for different Gd densities and U-235 enrichments which are given herein), but the core does not contain BARs. The new type TVS-2M Fas are modeled by the SARCS software package to find the PMAXS format for three states of CZP and HZP as well as HFP, and then the whole core is simulated by the PARCS code to investigate transient conditions. In addition, the WIMS-D5 code is suggested for steady core modeling including TVS-2M FAs and/or TVS FAs. Many neutronics aspects such as the first cycle length (first cycle burn up in terms of MW d/kgU), the critical concentration of boric acid at the BOC as well as the cycle length, the axial, and radial power peaking factors, differential and integral worthy of the most reactive CPS-CRs, reactivity coefficients of the fuel, moderator, boric acid, and the under-moderation estimation of the core are conducted and benchmarked with the PWR CDBL. Specifically, the burn-up calculations indicate that the 45.6 d increase of the first cycle length (which corresponds to 1.18 MW d/kgU increase of burn-up) is the best improving aim of the new FA type called TVS-2M. Moreover, thermal-hydraulics core design criteria such as MDNBR (based on W3 correlation) and the maximum of fuel and clad temperatures (radially and axially), are investigated, and discussed based on the CDBL.

相关研究