《结构与土木工程前沿（英文）》
>> 2017年
第11卷
第1期
doi:
10.1007/s11709-016-0356-8
RESEARCH ARTICLE
Control efficiency optimization and Sobol’s sensitivity indices of MTMDs design parameters for buffeting and flutter vibrations in a cable stayed bridge
Institute of Structural Mechanics, School of Civil Engineering, Bauhaus University Weimar, Weimar 99423, Germany
录用日期：
2016-11-09
发布日期：
2017-02-27
下一篇
上一篇
摘要
This paper studies optimization of three design parameters (mass ratio, frequency ratio and damping ratio) of multiple tuned mass dampers MTMDs that are applied in a cable stayed bridge excited by a strong wind using minimax optimization technique. ABAQUS finite element program is utilized to run numerical simulations with the support of MATLAB codes and Fast Fourier Transform FFT technique. The optimum values of these three parameters are validated with two benchmarks from the literature, first with Wang and coauthors and then with Lin and coauthors. The validation procedure detected a good agreement between the results. Box-Behnken experimental method is dedicated to formulate the surrogate models to represent the control efficiency of the vertical and torsional vibrations. Sobol’s sensitivity indices are calculated for the design parameters in addition to their interaction orders. The optimization results revealed better performance of the MTMDs in controlling the vertical and the torsional vibrations for higher mode shapes. Furthermore, the calculated rational effects of each design parameter facilitate to increase the control efficiency of the MTMDs in conjunction with the support of the surrogate models.
京公网安备 11010502051620号
