期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

《环境科学与工程前沿(英文)》 >> 2017年 第11卷 第6期 doi: 10.1007/s11783-017-0965-z

Optimization of microwave pretreatment of lignocellulosic waste for enhancing methane production: Hyacinth as an example

. Department of Municipal Engineering, Beijing University of Technology, Beijing 100124, China.. Department of Chemistry, University of Science & Technology of China, Hefei 230026, China.. School of Civil Engineering, Hefei University of Technology, Hefei 230092, China

发布日期: 2017-08-09

下一篇 上一篇

摘要

The effect of microwave pretreatment on the anaerobic degradation of hyacinth was investigated using response surface methodology (RSM). The components of lignin and the other constituents of hyacinth were altered by microwave pretreatment. Comparison of the near-infrared spectra of hyacinth pretreated by microwave irradiation and water-heating pretreatment revealed that no new compounds were generated during hyacinth pretreatment by microwave irradiation. Atomic force microscopy observations indicated that the physical structures of hyacinth were disrupted by microwave pretreatment. The yield of methane per gram of the microwave-irradiated substrate increased by 38.3% as compared to that of the substrate pretreated via water-heating. A maximum methane yield of 221 mL·g-sub was obtained under the optimum pretreatment conditions (substrate concentration (PSC) = 20.1 g·L and pretreatment time (PT) = 14.6 min) using RSM analysis. A maximum methane production rate of 0.76 mL·h ·g-sub was obtained by applying PSC= 9.5 g·L and PT= 11 min. Interactive item coefficient analysis showed that methane production was dependent on the PSC and PT, separately, whereas the interactive effect of the PSC and PT on methane production was not significant. The same trend was also observed for the methane production rate.

相关研究