一种超高强度钢构件抗疲劳实验研究
1.北京航空材料研究院,北京 100095
2.沈阳飞机设计研究所,沈阳 110035
下一篇 上一篇
摘要
提出了超高强度钢“无应力集中”抗疲劳概念。喷丸、孔挤压、螺纹滚压等表面层组织再造改性造成的残余压应力和高位错密度胞状结构将裂纹推移至亚表面萌生并阻滞其扩展,回复不同应力集中处的疲劳强度至接近钢的固有疲劳强度,形成“无应力集中”表面完整性状态。“无应力集中”抗疲劳概念表述为构件表面形成完整的接近于钢固有疲劳强度的等疲劳强度包络。
参考文献
[ 1 ] DaviesDP.Duplexhardening:anadvancedsurface treatment[J].HeatTreating, 1992, August:38~46
[ 2 ] KosterWP, FieldM, FritzLJ, etal.Surface integrityofmachinedstructuralcomponents[R].AFML-TR-70-11
[ 3 ] SadatAB.Effectofhighcuttingspeedonsurface integrityofAISI4340steelduringturning[J].MaterialsScienceandTechnology, 1990, 6 (April) :371~375
[ 4 ] NeaileyK.Surfaceintegrityofmachinedcomponents_microstructureaspects[J].MetalsandMaterials, 1988, (Feb) :93~96
[ 5 ] NeailyK.Surfaceintegrityofmachinedcomponents_residualstressesandfatigue[J].MetalsandMaterials, 1988, (March) :141~145
[ 6 ] 王 珉, LauWS.金属表面改性的预应力磨削机理研究[J].机械工程学报, 1992, 28 (3) :104~109
[ 7 ] JainKC, KumarAN, MittalRN, etal.Surface integrityofahardenedandgroundlow_alloysteel_study basedonsurfaceandsubsurfacedamage[J].Materials ScienceandTechnology, 1986, 2 (Aug.) :856~864
[ 8 ] AlexandreMA, DavidKA.TheSurfaceintegrityof turnedandgroundhardenedbearingsteel[J].Wear, 1996, 196:279~284
[ 9 ] 邱 琼.关于超高强度钢喷丸应变层特性与疲劳性能关系的研究[D].北京航空材料研究院硕士论文, 1984
[10] 李金魁.金属喷丸强化理论[D].哈尔滨工业大学博士学位论文, 1989
[11] 王升平.表面强化金属疲劳极限的研究[D].哈尔滨工业大学博士学位论文, 1994
[12] 李向斌, 王仁智, 殷源发.一种新型超高强度钢喷丸强化的研究[J].材料工程, 1991, (3) :14~18 链接1
[13] 宋德玉, 高 文, 赵振业.螺纹滚压强化对300M钢螺纹疲劳强度的影响[J].材料工程, 1993, 2:17~19 链接1