资源类型

期刊论文 1267

年份

2024 45

2023 119

2022 97

2021 81

2020 77

2019 75

2018 51

2017 58

2016 55

2015 55

2014 45

2013 47

2012 43

2011 50

2010 55

2009 57

2008 56

2007 58

2006 34

2005 15

展开 ︾

关键词

设计 19

三峡工程 10

优化设计 9

增材制造 9

机理 9

多目标优化 7

机器学习 5

材料设计 5

创新 4

创新设计 4

施工 4

3D打印 3

DX桩 3

协同设计 3

大坝 3

DSM（设计结构矩阵） 2

D区 2

Maradbcm算法 2

TRIZ 2

展开 ︾

检索范围：

排序： 展示方式：

Optimal design of a linkage–cam mechanism-based redundantly actuated parallel manipulator

《机械工程前沿（英文）》 2021年 第16卷 第3期   页码 451-467 doi: 10.1007/s11465-021-0634-6

摘要： A redundantly actuated parallel manipulator (RAPM) with mixed translational and rotational degrees of freedom (DOFs) is challenged for its dimensionally homogeneous Jacobian modeling and optimal design of architecture. In this paper, a means to achieve redundant actuation by adding kinematic constraints is introduced, which reduces the DOFs of the end-effector (EE). A generic dimensionally homogeneous Jacobian is developed for this type of RAPMs, which maps the generalized velocities of three points on the EE to the joint velocities. A new optimization algorithm derived from this dimensionally homogeneous Jacobian is proposed for the optimal design of this type of RAPMs. As an example, this paper presents a spatial RAPM involving linkages and cam mechanisms. This RAPM has 4 DOFs and 6 translational actuations. The linkage lengths and the position of the universal joints of the RAPM are optimized based on the dimensionally homogeneous Jacobian.

关键词： redundant actuation     parallel manipulator     linkage–cam mechanism     Jacobian     optimal design    

HTML PDF 收藏

Tracked robot with underactuated tension-driven RRP transformable mechanism: ideas and design

《机械工程前沿（英文）》 2024年 第19卷 第1期 doi: 10.1007/s11465-023-0777-8

摘要： Robots with transformable tracked mechanisms are widely used in complex terrains because of their high adaptability, and many studies on novel locomotion mechanisms have been conducted to make them able to climb higher obstacles. Developing underactuated transformable mechanisms for tracked robots could decrease the number of actuators used while maintaining the flexibility and obstacle-crossing capability of these robots, and increasing their cost performance. Therefore, the underactuated tracked robots have appreciable research potential. In this paper, a novel tracked robot with a newly proposed underactuated revolute‒revolute‒prismatic (RRP) transformable mechanism, which is inspired by the sit-up actions of humans, was developed. The newly proposed tracked robot has only two actuators installed on the track pulleys for moving and does not need extra actuators for transformations. Instead, it could concentrate the track belt’s tension toward one side, and the unbalanced tension would drive the linkage mechanisms to change its configuration. Through this method, the proposed underactuated design could change its external shape to create support points with the terrain and move its center of mass actively at the same time while climbing obstacles or crossing other kinds of terrains, thus greatly improving the climbing capability of the robot. The geometry and kinematic relationships of the robot and the crossing strategies for three kinds of typical obstacles are discussed. On the basis of such crossing motions, the parameters of links in the robot are designed to make sure the robot has sufficient stability while climbing obstacles. Terrain-crossing dynamic simulations were run and analyzed to prove the feasibility of the robot. A prototype was built and tested. Experiments show that the proposed robot could climb platforms with heights up to 33.3% of the robot’s length or cross gaps with widths up to 43.5% of the robot’s length.

关键词： mechanical design     tracked robot     underactuated mechanisms     RRP mechanism     obstacle crossing strategy    

HTML PDF 收藏

Design of a novel side-mounted leg mechanism with high flexibility for a multi-mission quadruped earth

《机械工程前沿（英文）》 2023年 第18卷 第2期 doi: 10.1007/s11465-022-0740-0

摘要： Earth rover is a class of emerging wheeled-leg robots for nature exploration. At present, few methods for these robots’ leg design utilize a side-mounted spatial parallel mechanism. Thus, this paper presents a complete design process of a novel 5-degree-of-freedom (5-DOF) hybrid leg mechanism for our quadruped earth rover BJTUBOT. First, a general approach is proposed for constructing the novel leg mechanism. Subsequently, by evaluating the basic locomotion task (LT) of the rover based on screw theory, we determine the desired motion characteristic of the side-mounted leg and carry out its two feasible configurations. With regard to the synthesis method of the parallel mechanism, a family of concise hybrid leg mechanisms using the 6-DOF limbs and an L1F1C limb (which can provide a constraint force and a couple) is designed. In verifying the motion characteristics of this kind of leg, we select a typical (3-UPRU&RRRR)&R mechanism and then analyze its kinematic model, singularities, velocity mapping, workspace, dexterity, statics, and kinetostatic performance. Furthermore, the virtual quadruped rover equipped with this innovative leg mechanism is built. Various basic and specific LTs of the rover are demonstrated by simulation, which indicates that the flexibility of the legs can help the rover achieve multitasking.

关键词： design synthesis     parallel mechanism     hybrid leg mechanism     screw theory     quadruped robot    

HTML PDF 收藏

Analysis and optimal design of an underactuated finger mechanism for LARM hand

Shuangji YAO, Marco CECCARELLI, Giuseppe CARBONE, Qiang ZHAN, Zhen LU

《机械工程前沿（英文）》 2011年 第6卷 第3期   页码 332-343 doi: 10.1007/s11465-011-0229-8

摘要：

This paper aims to present general design considerations and optimality criteria for underactuated mechanisms in finger designs. Design issues related to grasping task of robotic fingers are discussed. Performance characteristics are outlined as referring to several aspects of finger mechanisms. Optimality criteria of the finger performances are formulated after careful analysis. A general design algorithm is summarized and formulated as a suitable multi-objective optimization problem. A numerical case of an underactuated robot finger design for Laboratory of Robotics and Mechatronics (LARM) hand is illustrated with the aim to show the practical feasibility of the proposed concepts and computations.

关键词： robotic finger     underactuated mechanisms     design considerations    

HTML PDF 收藏

Mechanism design of reverse auction on concession period and generalized quality for PPP projects

Xianjia WANG, Shiwei WU

《工程管理前沿（英文）》 2017年 第4卷 第2期   页码 156-170 doi: 10.15302/J-FEM-2017016

摘要： Reverse auctions of PPP projects usually require the bid to specify several characteristics of quality and the concession period to be fulfilled. This paper sets up a summary function of generalized quality, which contributes to reducing the dimensions of information. Thus, the multidimensional reverse auction model of a PPP project can be replaced by a two-dimensional direct mechanism based on the concession period and the generalized quality. Based on the theory of the revelation principle, the feasibility conditions, equilibrium solution and generalized quality requirements of such a mechanism, considering the influence of a variable investment structure are described. Moreover, two feasible multidimensional reverse auctions for implementing such a direct mechanism: Adjusting the scoring function and establishing a special reverse auction rule are built. The analysis shows that in these types of reverse auctions, optimal allocation can be achieved, the social benefit under the incomplete information will be maximized, and the private sector with the highest integrated management level wins the bid. In such a direct mechanism, the investment and financial pressure of the public sector can be reduced.

关键词： PPP project     reverse auction     mechanism design     multidimensional information     scoring function     two-stage bidding    

HTML PDF 收藏

The Supply Chain Contract Design under Cap-and-Trade Mechanism with Free Riding

Fu-qiang Wang,Jun Liu

《工程管理前沿（英文）》 2015年 第2卷 第3期   页码 277-286 doi: 10.15302/J-FEM-2015049

摘要： This paper studies the influence of free riding on enterprise product pricing and carbon emissions reduction investment, as well as the contract design to achieve supply chain coordination under the carbon trading mechanism. First, we discuss the situation where carbon emissions reduction investment affects the product price and income. It demonstrates that the optimal investment of the upstream manufacturer increases with the degree of the free riding of the downstream manufacturer. The upstream manufacturer can improve their carbon reduction investment and the whole supply chain achieves Pareto improvement when the investment cost sharing contract is introduced. Nevertheless, under the cost-sharing contract the optimal investment of the decentralized supply chain is still lower than that of the centralized supply chain, and only in some particular cases can the two types of supply chain achieve equal total profits. Then, we preliminarily explore the situation where the product price and income is influenced by carbon emissions reduction investment. The consequences indicate that the optimal investment of the upstream manufacturers in this situation is less than the former one’s, and the transfer payment mechanism is able to improve the level of the supply chain overall carbon emissions-reduction. Moreover, compared to the former situation, the effects of free riding of the downstream manufacturer are even more serious. The conclusions can provide some intellectual support for manufacturing enterprises to make reasonable emissions reduction strategies and coordinate the supply chain existing in free riding.

关键词： carbon emissions reduction     free riding     supply chain contract design     cap-and-trade    

HTML PDF 收藏

Mechanical design, modeling, and identification for a novel antagonistic variable stiffness dexterous

《机械工程前沿（英文）》 2022年 第17卷 第3期 doi: 10.1007/s11465-022-0691-5

摘要： This study traces the development of dexterous hand research and proposes a novel antagonistic variable stiffness dexterous finger mechanism to improve the safety of dexterous hand in unpredictable environments, such as unstructured or man-made operational errors through comprehensive consideration of cost, accuracy, manufacturing, and application. Based on the concept of mechanical passive compliance, which is widely implemented in robots for interactions, a finger is dedicated to improving mechanical robustness. The finger mechanism not only achieves passive compliance against physical impacts, but also implements the variable stiffness actuator principle in a compact finger without adding supererogatory actuators. It achieves finger stiffness adjustability according to the biologically inspired stiffness variation principle of discarding some mobilities to adjust stiffness. The mechanical design of the finger and its stiffness adjusting methods are elaborated. The stiffness characteristics of the finger joint and the actuation unit are analyzed. Experimental results of the finger joint stiffness identification and finger impact tests under different finger stiffness presets are provided to verify the validity of the model. Fingers have been experimentally proven to be robust against physical impacts. Moreover, the experimental part verifies that fingers have good power, grasping, and manipulation performance.

关键词： multifingered hand     mechanism design     robot safety     variable stiffness actuator    

HTML PDF 收藏

Design and analysis of the gripper mechanism based on generalized parallel mechanisms with configurable

《机械工程前沿（英文）》 2021年 第16卷 第4期   页码 765-781 doi: 10.1007/s11465-021-0655-1

摘要： Generalized parallel mechanisms with a configurable moving platform have become popular in the research field of parallel mechanism. This type of gripper mechanism can be applied to grasp large or heavy objects in different environments that are dangerous and complex for humans. This study proposes a family of novel (5 + 1) degrees of freedom (three translations and two rotations plus an additional grasping motion) gripper mechanisms based on the generalized parallel mechanisms with a configurable moving platform. First, the configurable moving platform, which is a closed loop, is designed for grasping manipulation. The hybrid topological arrangement is determined to improve the stiffness of the manipulator and realize high load-to-weight ratios. A sufficient rule based on Lie group theory is proposed to synthesize the mechanism. The hybrid limb structure is also enumerated. A family of novel gripper mechanisms can be assembled through the hybrid limbs by satisfying the rule. Two examples of the gripper mechanisms with and without parallelogram pairs are shown in this study. A kinematic analysis of the example mechanism is presented. The workspace shows that the mechanism possesses high rotational capability. In addition, a stiffness analysis is performed.

关键词： generalized parallel mechanism     configurable moving platform     gripper mechanism     type synthesis     kinematic analysis    

HTML PDF 收藏

Theory and method of mechanism system design

Huijun ZOU, Qinghua LIANG, Qing ZHANG

《机械工程前沿（英文）》 2010年 第5卷 第4期   页码 399-411 doi: 10.1007/s11465-010-0116-8

摘要： Conceptual design is the most critical and creative phase of design. Recently, increasing attention has been directed to supporting conceptual-level computer aided creative design and its theories and methodologies. Specifically, for conceptual design of mechanical products, this paper presents a novel function solving model for mechanical product design and highlights the importance of systematic synthesis to achieve creative design. Then it builds a framework as a function-effect-process-action- mechanisms (FEPAM) mapping process, which enables creative design on the basis of conceiving different action schemes. After that, several key points are elaborated including 1) representing and decomposition methods of functions and motion behaviors; 2) action scheme representing method based on network plan techniques; and 3) variation and creation methods based on action scheme transformations.

关键词： mechanism system creative design     process model     function solving model     process action procedure     mechanisms knowledge base     principle of mechanism system composition    

HTML PDF 收藏

Design method and verification of a hybrid prosthetic mechanism with energy-damper clutchable device

《机械工程前沿（英文）》 2021年 第16卷 第4期   页码 747-764 doi: 10.1007/s11465-021-0644-4

摘要： Transfemoral amputees (TAs) have difficulty in mobility during walking, such as restricted movement of lower extremity and body instability, yet few transfemoral prostheses have explored human-like multiple motion characteristics by simple structures to fit the kinesiology, biomechanics, and stability of human lower extremity. In this work, the configurations of transfemoral prosthetic mechanism are synthesized in terms of human lower-extremity kinesiology. A hybrid transfemoral prosthetic (HTP) mechanism with multigait functions is proposed to recover the gait functions of TAs. The kinematic and mechanical performances of the designed parallel mechanism are analyzed to verify their feasibility in transfemoral prosthetic mechanism. Inspired by motion–energy coupling relationship of the knee, a wearable energy-damper clutched device that can provide energy in knee stance flexion to facilitate the leg off from the ground and can impede the leg’s swing velocity for the next stance phase is proposed. Its co-operation with the springs in the prismatic pairs enables the prosthetic mechanism to have the energy recycling ability under the gait rhythm of the knee joint. Results demonstrate that the designed HTP mechanism can replace the motion functions of the knee and ankle to realize its multimode gait and effectively decrease the peak power of actuators from 94.74 to 137.05 W while maintaining a good mechanical adaptive stability.

关键词： hybrid transfemoral prosthetic mechanism     energy recycling     wearable mechanical clutched device     mechanical adaptive stability    

HTML PDF 收藏

Automatic Design Theory and Realization of Kinematic Schemes for Mechanism System

YE Zhi-gang, ZOU Hui-jun, GUO Wei-zhong, HU Song, TIAN Yong-li, XU Yong

《机械工程前沿（英文）》 2006年 第1卷 第1期   页码 48-55 doi: 10.1007/s11465-005-0014-7

摘要：

Based on an analysis of mechanism combination methods of a current mechanism system kinematic scheme, input/output kinematic behavior and their constraint relations were proposed to represent the kinematic behavior knowledge of a mechanism system. Furthermore, a tree structure of a kinematic behavior decomposition process for a mechanism system was provided. Considering multiple outputs for a mechanism system, the matching algorithm and the attributes propagation method of kinematic behavior were used to generate a mechanism combination scheme. Its intermediate design solution and the constraint relations between input and output are generated to fill the common blackboard. Moreover, using information in the blackboard as input motion, the behavior attributes of other process actions are transmitted to attribute items of the blackboard, which finally enables a computer-aided automatic design process of a mechanism system kinematic scheme. To avoid the problem of schemes combination explosion caused by unbounded depth in the search process, bounded depth-first search was used to control the number of expanded hierarchies for a design tree. Finally, an example was given to show its feasibility and solution efficiency.

关键词： combination explosion     unbounded     computer-aided automatic     mechanism combination     information    

HTML PDF 收藏

On the improvement design of dynamic characteristics for the roller follower of a variable-speed platecam mechanism

Hui Ching FAN, Hong Sen YAN

《机械工程前沿（英文）》 2012年 第7卷 第1期   页码 5-15 doi: 10.1007/s11465-012-0310-y

摘要：

Without modifying the cam contour, a cam mechanism with a variable input speed trajectory offers an alternative solution to flexibly achieve kinematic and dynamic characteristics, and then decrease the follower’s residual vibration. Firstly, the speed trajectory of cam is derived by employing Bezier curve, and motion continuity conditions are investigated. Then the motion characteristics between the plate cam and its roller follower are derived. To analyze the residual vibration, a single degree of freedom dynamic model of the elastic cam-follower system is introduced. Based on the motion equation derived from the dynamic model, the residual vibration of the follower is yielded. The design procedure to improve the kinematic and dynamic motion characteristics is presented and two design examples with discussions are provided. Finally, the simulations of the kinematic and dynamic models by ADAMS are carried out and verified that the design models as well as the performances of the mechanism are feasible.

关键词： cam mechanism     variable input speed     kinematic design     dynamic design     optimal design    

HTML PDF 收藏

A feasibility study on the design and walking operation of a biped locomotor via dynamic simulation

null

《机械工程前沿（英文）》 2016年 第11卷 第2期   页码 144-158 doi: 10.1007/s11465-016-0391-0

摘要：

A feasibility study on the mechanical design and walking operation of a Cassino biped locomotor is presented in this paper. The biped locomotor consists of two identical 3 degrees-of-freedom tripod leg mechanisms with a parallel manipulator architecture. Planning of the biped walking gait is performed by coordinating the motions of the two leg mechanisms and waist. A three-dimensional model is elaborated in SolidWorks® environment in order to characterize a feasible mechanical design. Dynamic simulation is carried out in MSC.ADAMS® environment with the aims of characterizing and evaluating the dynamic walking performance of the proposed design. Simulation results show that the proposed biped locomotor with proper input motions of linear actuators performs practical and feasible walking on flat surfaces with limited actuation and reaction forces between its feet and the ground. A preliminary prototype of the biped locomotor is built for the purpose of evaluating the operation performance of the biped walking gait of the proposed locomotor.

关键词： feasibility study     biped locomotor     biped walking     mechanical design     dynamic simulation     tripod leg mechanism     3-UPU parallel manipulator    

HTML PDF 收藏

design of novel proton-pump inhibitors with reduced adverse effects

Xiaoyi Li, Hong Kang, Wensheng Liu, Sarita Singhal, Na Jiao, Yong Wang, Lixin Zhu, Ruixin Zhu

《医学前沿（英文）》 2019年 第13卷 第2期   页码 277-284 doi: 10.1007/s11684-018-0630-3

摘要： The development of new proton-pump inhibitors (PPIs) with less adverse effects by lowering the pKa values of nitrogen atoms in pyrimidine rings has been previously suggested by our group. In this work, we proposed that new PPIs should have the following features: (1) number of ring II= number of ring I+ 1; (2) preferably five, six, or seven-membered heteroatomic ring for stability; and (3) 1

关键词： proton-pump inhibitor     adverse effect     pharmacological mechanism     toxicological mechanism     pKa calculation    

HTML PDF 收藏

Design and locomotion analysis of two kinds of rolling expandable mobile linkages with a single degree

Yanlin HAO, Yaobin TIAN, Jianxu WU, Yezhuo LI, Yan-An YAO

《机械工程前沿（英文）》 2020年 第15卷 第3期   页码 365-373 doi: 10.1007/s11465-020-0585-3

摘要： This study presents two kinds of rolling robots that are able to roll by deforming their outer shapes with a single degree of freedom. Each robot is an essential multi-loop planar expandable linkage constructed by a concave outer loop and several inner parallelogram loops. In this study, the mechanical design of the robots is introduced. Dynamic rolling process is further analyzed on the basis of zero moment point method, and a morphing strategy is proposed to guarantee a stable dynamic rolling process. A novel passive rolling locomotion is also developed, which enables the robots to roll and stand on a slope. To verify the design, two prototypes are manufactured, wherein the dynamic and passive rolling locomotion are carried out.

关键词： rolling locomotion     expandable mechanism     mechanism design     zero moment point (ZMP) analysis    

HTML PDF 收藏

标题 作者 时间 类型 操作

Optimal design of a linkage–cam mechanism-based redundantly actuated parallel manipulator

期刊论文

Tracked robot with underactuated tension-driven RRP transformable mechanism: ideas and design

期刊论文

Design of a novel side-mounted leg mechanism with high flexibility for a multi-mission quadruped earth

期刊论文

Analysis and optimal design of an underactuated finger mechanism for LARM hand

Shuangji YAO, Marco CECCARELLI, Giuseppe CARBONE, Qiang ZHAN, Zhen LU

期刊论文

Mechanism design of reverse auction on concession period and generalized quality for PPP projects

Xianjia WANG, Shiwei WU

期刊论文

The Supply Chain Contract Design under Cap-and-Trade Mechanism with Free Riding

Fu-qiang Wang,Jun Liu

期刊论文

Mechanical design, modeling, and identification for a novel antagonistic variable stiffness dexterous

期刊论文

Design and analysis of the gripper mechanism based on generalized parallel mechanisms with configurable

期刊论文

Theory and method of mechanism system design

Huijun ZOU, Qinghua LIANG, Qing ZHANG

期刊论文

Design method and verification of a hybrid prosthetic mechanism with energy-damper clutchable device

期刊论文

Automatic Design Theory and Realization of Kinematic Schemes for Mechanism System

YE Zhi-gang, ZOU Hui-jun, GUO Wei-zhong, HU Song, TIAN Yong-li, XU Yong

期刊论文

On the improvement design of dynamic characteristics for the roller follower of a variable-speed platecam mechanism

Hui Ching FAN, Hong Sen YAN

期刊论文

A feasibility study on the design and walking operation of a biped locomotor via dynamic simulation

null

期刊论文

design of novel proton-pump inhibitors with reduced adverse effects

Xiaoyi Li, Hong Kang, Wensheng Liu, Sarita Singhal, Na Jiao, Yong Wang, Lixin Zhu, Ruixin Zhu

期刊论文

Design and locomotion analysis of two kinds of rolling expandable mobile linkages with a single degree

Yanlin HAO, Yaobin TIAN, Jianxu WU, Yezhuo LI, Yan-An YAO

期刊论文