资源类型

期刊论文 207

年份

2023 15

2022 14

2021 14

2020 15

2019 16

2018 13

2017 13

2016 5

2015 8

2014 9

2013 19

2012 4

2011 10

2010 11

2009 8

2008 10

2007 4

2005 4

2004 1

2003 3

展开 ︾

关键词

固体氧化物燃料电池 8

燃料电池 8

生物质 4

新能源 3

氢能 3

SOFC 2

催化剂 2

双极板 2

替代燃料 2

柴油 2

核燃料循环 2

氢燃料电池 2

清洁燃料 2

燃烧特性 2

碳基燃料 2

2035 1

300 M钢 1

CO2 加氢 1

NOx 1

展开 ︾

检索范围：

排序： 展示方式：

Modeling of single coal particle combustion in O

Xiehe YANG, Yang ZHANG, Daoyin LIU, Jiansheng ZHANG, Hai ZHANG, Junfu LYU, Guangxi YUE

《能源前沿（英文）》 2021年 第15卷 第1期   页码 99-111 doi: 10.1007/s11708-020-0685-0

摘要： A one-dimensional transient single coal particle combustion model was proposed to investigate the characteristics of single coal particle combustion in both O /N and O /CO atmospheres under the fluidized bed combustion condition. The model accounted for the fuel devolatilization, moisture evaporation, heterogeneous reaction as well as homogeneous reactions integrated with the heat and mass transfer from the fluidized bed environment to the coal particle. This model was validated by comparing the model prediction with the experimental results in the literature, and a satisfactory agreement between modeling and experiments proved the reliability of the model. The modeling results demonstrated that the carbon conversion rate of a single coal particle (diameter 6 to 8 mm) under fluidized bed conditions (bed temperature 1088 K) in an O /CO (30:70) atmosphere was promoted by the gasification reaction, which was considerably greater than that in the O /N (30:70) atmosphere. In addition, the surface and center temperatures of the particle evolved similarly, no matter it is under the O /N condition or the O /CO condition. A further analysis indicated that similar trends of the temperature evolution under different atmospheres were caused by the fact that the strong heat transfer under the fluidized bed condition overwhelmingly dominated the temperature evolution rather than the heat release of the chemical reaction.

关键词： coal     oxy-fuel     fluidized bed     combustion     simulation    

HTML PDF 收藏

Combustion and emissions of RP-3 jet fuel and diesel fuel in a single-cylinder diesel engine

《能源前沿（英文）》 2023年 第17卷 第5期   页码 664-677 doi: 10.1007/s11708-021-0787-3

摘要： The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition (CI) engine. Engine operational parameters, including engine load (0.6, 0.7, and 0.8 MPa indicating the mean effective pressure (IMEP)), the exhaust gas recirculation (EGR) rate (0%, 10%, 20%, and 30%), and the fuel injection timing (−20, −15, −10, and −5 ° crank angle (CA) after top dead center (ATDC)) were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions. In comparison to diesel fuel, RP-3 jet fuel shows a retarded heat release and lagged combustion phase, which is more obvious under heavy EGR rate conditions. In addition, the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions. As a result, RP-3 jet fuel features a longer ignition delay (ID) time, a shorter combustion duration (CD), and an earlier CA50 than diesel fuel. The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency (ITE) compared to diesel fuel, but the ITE difference becomes less noticeable under large EGR rate conditions. Compared with diesel fuel, the nitrogen oxides (NOx) emissions of RP-3 jet fuel are higher while its soot emissions are lower. The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.

关键词： RP-3 jet fuel     diesel     engine     combustion     emissions    

HTML PDF 收藏

Impacts of methanol fuel on vehicular emissions: A review

《环境科学与工程前沿（英文）》 2022年 第16卷 第9期 doi: 10.1007/s11783-022-1553-4

摘要：

● Methanol effectively reduces CO, HC, CO2, PM, and PN emissions of gasoline vehicles.

关键词： Methanol fuel     Vehicular emission     Emission reduction     Cleaner fuel     Gasoline substitute    

HTML PDF 收藏

Failure mode investigation of fuel cell for vehicle application

Zhongjun HOU, Renfang WANG, Keyong WANG, Weiyu SHI, Danming XING, Hongchun JIANG

《能源前沿（英文）》 2017年 第11卷 第3期   页码 318-325 doi: 10.1007/s11708-017-0488-0

摘要： The durability of proton exchange membrane fuel cells (PEMFCs) has been posing a key technical challenge to commercial spread of fuel cell vehicles (FCVs). To improve the durability, it is necessary to optimize the fuel cell system (FCS) design against failure modes. The fuel cell durability research method at FCS scale was exhibited, and the failure modes of fuel cell were experimentally investigated in this paper. It is found that the fuel cell dry operation, start/stop cycle and gas diffusion layer (GDL) flooding are typical failure modes of fuel cells. After the modifications against the failure modes, the durability of FCSs is improved to over 3000 h step by step.

关键词： proton exchange membrane fuel cell (PEMFC)     fuel cell system (FCS)     durability     failure mode     fuel cell vehicle (FCV)     carbon corrosion     water management    

HTML PDF 收藏

Numerical investigation of the effects of fuel spray type on the interaction of fuel spray and hot porous

ZHAO Zhiguo, XIE Maozhao

《能源前沿（英文）》 2008年 第2卷 第1期   页码 59-65 doi: 10.1007/s11708-008-0022-5

摘要： The interaction between two types of fuel spray and a hot porous medium is studied numerically by using an improved version of KIVA-3V code. The improved KIVA-3V code is incorporated with an impingement model, a heat transfer model and a linearized instability sheet atomization (LISA) model to model the hollow cone spray. An evaporating fuel spray impingement on a hot plane surface was simulated under conditions of experiments performed by Senda to validate the reasonability of the KIVA-3V code. The numerical results conform well with experimental data for spray radius in the liquid and the vapor phases. Computational results on the interaction of two types of the fuel spray and the hot porous medium show that the fuel spray can be split, which provides conditions for quick evaporation of fuel droplets and mixing of fuel vapor with air. The possibility of fuel droplets from hollow cone spray crossing the porous medium reduces compared with that from solid cone spray, with the same initial kinetic energy of fuel droplets in both injection types.

关键词： improved version     impingement     atomization     hollow     radius    

HTML PDF 收藏

Recent advances in cathode electrocatalysts for PEM fuel cells

Junliang ZHANG

《能源前沿（英文）》 2011年 第5卷 第2期   页码 137-148 doi: 10.1007/s11708-011-0153-y

摘要： Great progress has been made in the past two decades in the development of the electrocatalysts for proton exchange membrane fuel cells (PEMFCs). This review article is focused on recent advances made in the kinetic-activity improvement on platinum- (Pt-) based cathode electrocatalysts for the oxygen reduction reaction (ORR). The origin of the limited ORR activity of Pt catalysts is discussed, followed by a review on the development of Pt alloy catalysts, Pt monolayer catalysts, and shape- and facet-controlled Pt-alloy nanocrystal catalysts. Mechanistic understanding is reviewed as well on the factors contributing to the enhanced ORR activity of these catalysts. Finally, future directions for PEMFC catalyst research are proposed.

关键词： proton exchange membrane fuel cells (PEMFCs)     cathode electrocatalysts     platinum     oxygen reduction reaction (ORR)    

HTML PDF 收藏

TiO supported IrO for anode reversal tolerance in proton exchange membrane fuel cell

《能源前沿（英文）》 2022年 第16卷 第5期   页码 852-861 doi: 10.1007/s11708-021-0811-7

摘要： Fuel starvation can occur and cause damage to the cell when proton exchange membrane fuel cells operate under complex working conditions. In this case, carbon corrosion occurs. Oxygen evolution reaction (OER) catalysts can alleviate carbon corrosion by introducing water electrolysis at a lower potential at the anode in fuel shortage. The mixture of hydrogen oxidation reaction (HOR) and unsupported OER catalyst not only reduces the electrolysis efficiency, but also influences the initial performance of the fuel cell. Herein, Ti4O7 supported IrOx is synthesized by utilizing the surfactant-assistant method and serves as reversal tolerant components in the anode. When the cell reverse time is less than 100 min, the cell voltage of the MEA added with IrOx/Ti4O7 has almost no attenuation. Besides, the MEA has a longer reversal time (530 min) than IrOx (75 min), showing an excellent reversal tolerance. The results of electron microscopy spectroscopy show that IrOx particles have a good dispersity on the surface of Ti4O7 and IrOx/Ti4O7 particles are uniformly dispersed on the anode catalytic layer. After the stability test, the Ti4O7 support has little decay, demonstrating a high electrochemical stability. IrOx/Ti4O7 with a high dispersity has a great potential to the application on the reversal tolerance anode of the fuel cell.

关键词： proton exchange membrane fuel cell (PEMFC)     fuel starvation     cell reverse     reversal tolerance anode     oxygen evolution reaction    

HTML PDF 收藏

Current challenge and perspective of PGM-free cathode catalysts for PEM fuel cells

Gang WU

《能源前沿（英文）》 2017年 第11卷 第3期   页码 286-298 doi: 10.1007/s11708-017-0477-3

摘要： To significantly reduce the cost of proton exchange membrane fuel cells, platinum-group metal (PGM)-free cathode catalysts are highly desirable. Current M-N-C (M: Fe, Co or Mn) catalysts are considered the most promising due to their encouraging performance. The challenge thus has been their stability under acidic conditions, which has hindered their use for any practical applications. In this review, based on the author’s research experience in the field for more than 10 years, current challenges and possible solutions to overcome these problems were discussed. The current Edisonian approach (i.e., trial and error) to developing PGM-free catalysts has been ineffective in achieving revolutionary breakthroughs. Novel synthesis techniques based on a more methodological approach will enable atomic control and allow us to achieve optimal electronic and geometric structures for active sites uniformly dispersed within the 3D architectures. Structural and chemical controlled precursors such as metal-organic frameworks are highly desirable for making catalysts with an increased density of active sites and strengthening local bonding structures among N, C and metals. Advanced electrochemical and physical characterization, such as electron microscopy and X-ray absorption spectroscopy should be combined with first principle density functional theory (DFT) calculations to fully elucidate the active site structures.

关键词： oxygen reduction     fuel cells     cathode     nonprecious metal catalysts     carbon nanocomposites    

HTML PDF 收藏

Renewable synthetic fuel: turning carbon dioxide back into fuel

《能源前沿（英文）》 2022年 第16卷 第2期   页码 145-149 doi: 10.1007/s11708-022-0828-6

HTML PDF 收藏

A comprehensive assessment on the durability of gas diffusion electrode materials in PEM fuel cell stack

Arunkumar JAYAKUMAR

《能源前沿（英文）》 2019年 第13卷 第2期   页码 325-338 doi: 10.1007/s11708-019-0618-y

摘要： Polymer electrolyte membrane (PEM) fuel cell is the most promising among the various types of fuel cells. Though it has found its applications in numerous fields, the cost and durability are key barriers impeding the commercialization of PEM fuel cell stack. The crucial and expensive component involved in it is the gas diffusion electrode (GDE) and its degradation, which limits the performance and life of the fuel cell stack. A critical analysis and comprehensive understanding of the structural and functional properties of various materials involved in the GDE can help us to address the related durability and cost issues. This paper reviews the key GDE components, and in specific, the root causes influencing the durability. It also envisages the role of novel materials and provides a critical recommendation to improve the GDE durability.

关键词： PEM fuel cell     gas diffusion electrode(GDE)     gas diffusion layer(GDL)     membrane electrode assembly     durability     fuel cell catalyst    

HTML PDF 收藏

A methodology for regulating fuel stratification and improving fuel economy of GCI mode via double main-injection

《能源前沿（英文）》 2023年 第17卷 第5期   页码 678-691 doi: 10.1007/s11708-022-0859-z

摘要： Gasoline compression ignition (GCI) combustion faces problems such as high maximum pressure rise rate (MPRR) and combustion deterioration at high loads. This paper aims to improve the engine performance of the GCI mode by regulating concentration stratification and promoting fuel-gas mixing by utilizing the double main-injection (DMI) strategy. Two direct injectors simultaneously injected gasoline with an octane number of 82.7 to investigate the energy ratio between the two main-injection and exhaust gas recirculation (EGR) on combustion and emissions. High-load experiments were conducted using the DMI strategy and compared with the single main-injection (SMI) strategy and conventional diesel combustion. The results indicate that the DMI strategy have a great potential to reduce the MPRR and improve the fuel economy of the GCI mode. At a 10 bar indicated mean effective pressure, increasing the main-injection-2 ratio (Rm-2) shortens the injection duration and increases the mean mixing time. Optimized Rm-2 could moderate the trade-off between the MPRR and the indicated specific fuel consumption with both reductions. An appropriate EGR should be adopted considering combustion and emissions. The DMI strategy achieves a highly efficient and stable combustion at high loads, with an indicated thermal efficiency (ITE) greater than 48%, CO and THC emissions at low levels, and MPRR within a reasonable range. Compared with the SMI strategy, the maximum improvement of the ITE is 1.5%, and the maximum reduction of MPRR is 1.5 bar/°CA.

关键词： gasoline compression ignition     injection strategy     fuel stratification     high efficiency     high load    

HTML PDF 收藏

A hybrid fuel cell for water purification and simultaneously electricity generation

《环境科学与工程前沿（英文）》 2023年 第17卷 第1期 doi: 10.1007/s11783-023-1611-6

摘要：

● A novel hybrid fuel cell (F-HFC) was fabricated.

关键词： Flow-through field     Hybrid fuel cell     Polyoxometalates     Water purification     Electricity generation    

HTML PDF 收藏

Effect of distributions of fuel concentration and temperature on ignition processes in a diesel PCCI

Yang YU, Wanhua SU,

《能源前沿（英文）》 2010年 第4卷 第2期   页码 269-279 doi: 10.1007/s11708-009-0046-5

摘要： The distributions of fuel concentration and temperature have significant effect on the ignition processes of diesel premixed charge compression ignition (PCCI) combustion. It was found in this study that the ignition process of PCCI combustion organized by multi-pulse injection was strongly influenced by conditions of fuel stratification. The start of low temperature reactions occurred in the leaner area of the combustion chamber in the test engine because the temperature here first reached the point of low temperature reactions. Ignition always occurred in the position where the mixture featured with equivalence ratios close to the mean equivalence ratio of the overall mixture, while the neighboring area of the initial ignition area accumulate heat with a finite speed until finally autoigniting. Moreover, the appearance of highest combustion temperature occurred in the same area at the combustion chamber. For more homogeneous mixture, a higher amount of mixture reached ignition simultaneously, resulting in a larger initial ignition area and a higher temperature at the ignition area. Furthermore, V-type distribution of equivalence ratio was found to be beneficial to retarding high temperature reaction.

关键词： PCCI     fuel stratification     multi-pulse injection     ignition    

HTML PDF 收藏

Anion-exchange membrane direct ethanol fuel cells: Status and perspective

T.S. Zhao, Y.S. Li, S.Y. Shen

《能源前沿（英文）》 2010年 第4卷 第4期   页码 443-458 doi: 10.1007/s11708-010-0127-5

摘要： Direct ethanol fuel cells (DEFCs) are a promising carbon-neutral and sustainable power source for portable, mobile, and stationary applications. However, conventional DEFCs that use acid proton-exchange membranes (typically Nafion type) and platinum-based catalysts exhibit low performance (i.e., the state-of-the-art peak power density is 79.5 mW/cm at 90°C). Anion-exchange membrane (AEM) DEFCs that use low-cost AEM and non-platinum catalysts have recently been demonstrated to yield a much better performance (i.e., the state-of-the-art peak power density is 160 mW/cm at 80°C). This paper provides a comprehensive review of past research on the development of AEM DEFCs, including the aspects of catalysts, AEMs, and single-cell design and performance. Current and future research challenges are identified along with potential strategies to overcome them.

关键词： fuel cell     direct ethanol fuel cells     anion-exchange membrane     ethanol oxidation reaction     oxygen reduction reaction     cell performance    

HTML PDF 收藏

Production of hydrogen from fossil fuel: A review

《能源前沿（英文）》 2023年 第17卷 第5期   页码 585-610 doi: 10.1007/s11708-023-0886-4

摘要： Production of hydrogen, one of the most promising alternative clean fuels, through catalytic conversion from fossil fuel is the most technically and economically feasible technology. Catalytic conversion of natural gas into hydrogen and carbon is thermodynamically favorable under atmospheric conditions. However, using noble metals as a catalyst is costly for hydrogen production, thus mandating non-noble metal-based catalysts such as Ni, Co, and Cu-based alloys. This paper reviews the various hydrogen production methods from fossil fuels through pyrolysis, partial oxidation, autothermal, and steam reforming, emphasizing the catalytic production of hydrogen via steam reforming of methane. The multicomponent catalysts composed of several non-noble materials have been summarized. Of the Ni, Co, and Cu-based catalysts investigated in the literature, Ni/Al2O3 catalyst is the most economical and performs best because it suppresses the coke formation on the catalyst. To avoid carbon emission, this method of hydrogen production from methane should be integrated with carbon capture, utilization, and storage (CCUS). Carbon capture can be accomplished by absorption, adsorption, and membrane separation processes. The remaining challenges, prospects, and future research and development directions are described.

关键词： methane     catalytic conversion     natural gas     hydrogen production     CCUS    

HTML PDF 收藏

标题 作者 时间 类型 操作

Modeling of single coal particle combustion in O

Xiehe YANG, Yang ZHANG, Daoyin LIU, Jiansheng ZHANG, Hai ZHANG, Junfu LYU, Guangxi YUE

期刊论文

Combustion and emissions of RP-3 jet fuel and diesel fuel in a single-cylinder diesel engine

期刊论文

Impacts of methanol fuel on vehicular emissions: A review

期刊论文

Failure mode investigation of fuel cell for vehicle application

Zhongjun HOU, Renfang WANG, Keyong WANG, Weiyu SHI, Danming XING, Hongchun JIANG

期刊论文

Numerical investigation of the effects of fuel spray type on the interaction of fuel spray and hot porous

ZHAO Zhiguo, XIE Maozhao

期刊论文

Recent advances in cathode electrocatalysts for PEM fuel cells

Junliang ZHANG

期刊论文

TiO supported IrO for anode reversal tolerance in proton exchange membrane fuel cell

期刊论文

Current challenge and perspective of PGM-free cathode catalysts for PEM fuel cells

Gang WU

期刊论文

Renewable synthetic fuel: turning carbon dioxide back into fuel

期刊论文

A comprehensive assessment on the durability of gas diffusion electrode materials in PEM fuel cell stack

Arunkumar JAYAKUMAR

期刊论文

A methodology for regulating fuel stratification and improving fuel economy of GCI mode via double main-injection

期刊论文

A hybrid fuel cell for water purification and simultaneously electricity generation

期刊论文

Effect of distributions of fuel concentration and temperature on ignition processes in a diesel PCCI

Yang YU, Wanhua SU,

期刊论文

Anion-exchange membrane direct ethanol fuel cells: Status and perspective

T.S. Zhao, Y.S. Li, S.Y. Shen

期刊论文

Production of hydrogen from fossil fuel: A review

期刊论文