摘要: In spark ignition (SI) engines, knock suppression is essential to improve fuel economy. Integrating new technologies into already complex downsized turbocharged engines increases the number of design and control variables substantially and requires extensive engine testing. Utilizing simulation-based study in an engine development process is crucial to reduce expensive and time-consuming engine tests. A quasi-dimensional (quasi-D) two-zone SI engine model is typically used in SI engine simulations. However, the usefulness of quasi-D-based simulation tools is often limited by the predictive capability of knock models. In this study, a novel knock model intended to be implemented in quasi-D SI engine simulation was developed. The model comprises a two-stage ignition delay model, a knock combustion model, and a knock index model. The knock model simulates the heat release spike during a knock combustion, which can be observed from the apparent heat release rate generated with the low-pass filtered cylinder pressure data. The model was calibrated and validated against engine experimental data. Its capability of knock detection and knock-limited spark timing estimation was demonstrated under various conditions of octane numbers, air–fuel equivalence ratios, and coolant temperatures with toluene primary reference fuel (TRPF). The knock model was also able to capture different knock characteristics between TPRF and primary reference fuel (PRF) in modern downsized turbocharged SI engines. The proposed methodology represents a useful tool to be employed during the development phase of an engine to reduce the experimental efforts while improving the engine performance at knock borderline.