Frontiers of Mechanical Engineering
>> 2006,
Volume 1,
Issue 3
doi:
10.1007/s11465-006-0023-1
Research on direct digital process of inductance sensor
Mechanical Engineering College, Hubei University of Technology, Wuhan 430068, China;
Available online: 2006-09-05
Next
Previous
Abstract
The equivalent circuit of inductance sensor is analyzed. Amplitude-displacement and phase-displacement equations are deduced for non-ideal carrier wave and inductance parameters. Simulation computation shows the corresponding digital curves. Considering that the traditional process method is an approximate one, a new method is presented to simultaneously obtain the amplitude and phase of output signal of sensor by simultaneity A/D and ellipse fit arithmetic. According to the characteristic of the amplitude-displacement and phase-displacement curves, we obtain displacement by phase and amplitude respectively when the sensor is close to the zero point position and away from other positions on the basis of the experiment. The experiment showed that this method can improve precision of measurement, and it can also work for the whole linear range of sensors even if the magnification is very high.
京公网安备 11010502051620号
