2016, Volume 11, Issue 4
Frontiers of Mechanical Engineering >> 2016, Volume 11, Issue 4 doi: 10.1007/s11465-016-0388-8
Assessing the effects of different dielectrics on environmentally conscious powder-mixed EDM of difficult-to-machine material (WC-Co)
Department of Mechanical Engineering, National Institute of Technology, Hamirpur, Himachal Pradesh-177005, India
Next Previous
Abstract
Electrical discharge machining (EDM) is a well-known nontraditional manufacturing process to machine the difficult-to-machine (DTM) materials which have unique hardness properties. Researchers have successfully performed hybridization to improve this process by incorporating powders into the EDM process known as powder-mixed EDM process. This process drastically improves process efficiency by increasing material removal rate, micro-hardness, as well as reducing the tool wear rate and surface roughness. EDM also has some input parameters, including pulse-on time, dielectric levels and its type, current setting, flushing pressure, and so on, which have a significant effect on EDM performance. However, despite their positive influence, investigating the effects of these parameters on environmental conditions is necessary. Most studies demonstrate the use of kerosene oil as dielectric fluid. Nevertheless, in this work, the authors highlight the findings with respect to three different dielectric fluids, including kerosene oil, EDM oil, and distilled water using one-variable-at-a-time approach for machining as well as environmental aspects. The hazard and operability analysis is employed to identify the inherent safety factors associated with powder-mixed EDM of WC-Co.
Keywords
WC ; hazard and operability analysis (HAZOP) ; discharging ; aerosol concentration ; dielectrics ; powders
京公网安备 11010502051620号
