Frontiers of Mechanical Engineering
>> 2019,
Volume 14,
Issue 1
doi:
10.1007/s11465-018-0522-x
RESEARCH ARTICLE
An exploratory study for predicting component reliability with new load conditions
| Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA |
Accepted: 2018-07-20
Available online: 2018-11-30
Next
Previous
Abstract
Reliability is important to design innovation. A new product should be not only innovative, but also reliable. For many existing components used in the new product, their reliability will change because the applied Loads are different from the ones for which the components are originally designed and manufactured. Then the new reliability must be re-evaluated. The system designers of the new product, however, may not have enough information to perform this task. With a beam problem as a case study, this study explores a feasible way to re-evaluate the component reliability with new Loads given the following information: The original reliability of the component with respect to the component Loads and the distributions of the new component Loads. Physics-based methods are employed to build the equivalent component limit-state function that can predict the component failure under the new Loads. Since the information is limited, the re-evaluated component reliability is given by its maximum and minimum values. The case study shows that good accuracy can be obtained even though the new reliability is provided with the aforementioned interval.
京公网安备 11010502051620号
