Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Frontiers of Mechanical Engineering >> 2019, Volume 14, Issue 2 doi: 10.1007/s11465-019-0536-z

Manufacturing cost constrained topology optimization for additive manufacturing

Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261, USA

Accepted: 2019-03-29 Available online: 2019-03-29

Next Previous

Abstract

This paper presents a manufacturing cost constrained topology optimization algorithm considering the laser powder bed additive manufacturing process. Topology optimization for additive manufacturing was recently extensively studied, and many related topics have been addressed. However, metal additive manufacturing is an expensive process, and the high manufacturing cost severely hinders the widespread use of this technology. Therefore, the proposed algorithm in this research would provide an opportunity to balance the manufacturing cost while pursuing the superior structural performance through topology optimization. Technically, the additive manufacturing cost model for laser powder bed-based process is established in this paper and real data is collected to support this model. Then, this cost model is transformed into a level set function-based expression, which is integrated into the level set topology optimization problem as a constraint. Therefore, by properly developing the sensitivity result, the metallic additive manufacturing part can be optimized with strictly constrained manufacturing cost. Effectiveness of the proposed algorithm is proved by numerical design examples.

Related Research