Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Frontiers of Chemical Science and Engineering >> 2008, Volume 2, Issue 3 doi: 10.1007/s11705-008-0051-y

Preparation and photocatalytic kinetics of nano-ZnO powders by precipitation stripping process

1.School of Chemical Engineering and the Environment, Beijing Institute of Technology; 2.School of Science, Beijing Institute of Technology; 3.D.I. Mendeleyev University of Chemical Technology of Russia;

Available online: 2008-09-05

Next Previous

Abstract

Ultra-fine zinc oxalate powders were prepared through a precipitation stripping method with bis(2-ethylhexyl) phosphate (HDEHP) diluted by tetrachloride carbon as the extractant, and oxalic acid ethanol aqueous solution as the re-extractant and precipitator. Zinc oxide powders were obtained by decomposing zinc oxalate powders at 450°C. The prepared zinc oxide powders were characterized by transmission electron microscope (TEM), Scanning electron microscope (SEM), Thermogravimetric analysis (TG), X-ray diffraction (XRD) and Fourier transmission infrared (FT-IR) spectrum. The photocatalytic performance of methylene blue by zinc oxide was studied based on the Langmuir model and Photo-Layer model. The results show that some zinc oxide powders were micro-multipore materials with hexagonal crystal. The particle size was around 32 nm. The photocatalytic process was the control step in the chemical reaction. The photo catalytic process followed pseudo-first order kinetics and •OH concentration inside the photo-layer in different reaction condition were calculated according to the Photo-Layer model.

Related Research