Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Frontiers of Chemical Science and Engineering >> 2019, Volume 13, Issue 2 doi: 10.1007/s11705-019-1798-z

Continuous flow removal of acid fuchsine by dielectric barrier discharge plasma water bed enhanced by activated carbon adsorption

. School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Brisbane, QLD 4000, Australia.. CSIRO-QUT Joint Sustainable Processes and Devices Laboratory, CSIRO, Lindfield, NSW 2070, Australia.. Fujian Key Laboratory for Plasma and Magnetic Resonance, School of Physics Science and Technology, Xiamen University, Xiamen 361005, China

Accepted: 2019-04-03 Available online: 2019-04-03

Next Previous

Abstract

Continuous processes which allow for large amount of wastewater to be treated to meet drainage standards while reducing treatment time and energy consumption are urgently needed. In this study, a dielectric barrier discharge plasma water bed system was designed and then coupled with granular activated carbon (GAC) adsorption to rapidly remove acid fuchsine (AF) with high efficiency. Effects of feeding gases, treatment time and initial concentration of AF on removal efficiency were investigated. Results showed that compared to the N and air plasmas treatments, O plasma processing was most effective for AF degradation due to the strong oxidation ability of generated activated species, especially the OH radicals. The addition of GAC significantly enhanced the removal efficiency of AF in aqueous solution and shorten the required time by 50%. The effect was attributed to the ability of porous carbon to trap and concentrate the dye, increasing the time dye molecules were exposed to the plasma treated solution, and to enhance the production of OH radicals on/in GAC to boost the degradation of dyes by plasma as well as in situ regenerate the exhausted GAC. The study offers a new opportunity for continuous effective remediation of wastewater contaminated with organic dyes using plasma technologies.

Related Research