Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Frontiers in Energy >> 2009, Volume 3, Issue 1 doi: 10.1007/s11708-008-0078-2

Process analysis of syngas production by non-catalytic POX of oven gas

Institute of Clean Coal Technology, East China University of Science and Technology;

Available online: 2009-03-05

Next Previous

Abstract

A non-catalytic POX of oven gas is proposed to solve the problem of secondary pollution due to solid wastes produced from the great amount of organic sulfur contained in oven gas in the traditional catalytic partial oxidation (POX) process. A study of the measurement of flow field and a thermodynamic analysis of the process characteristics were conducted. Results show that there exist a jet-flow region, a recirculation-flow region, a tube-flow region, and three corresponding reaction zones in the non-catalytic POX reformer. The combustion of oven gas occurs mainly in the jet-flow region, while the reformation of oven gas occurs mainly in the other two regions. Soot would not be formed by CH cracking at above 1200°C. Since there are very little C hydrocarbons in oven gas, the soot produced would be very tiny, even if they underwent cracking reaction. The integrated model for entrained bed gasification process was applied to simulate a non-catalytic POX reformer. It indicated that the proper oxygen-to-oven gas ratio is 0.22–0.28 at different pressures in the oven gas reformation process.

Related Research