Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Frontiers of Structural and Civil Engineering >> 2021, Volume 15, Issue 4 doi: 10.1007/s11709-021-0734-8

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

1. Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing 210098, China;2. Jiangsu Province’s Geotechnical Research Center, Nanjing 210098, China;1. Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing 210098, China;2. Jiangsu Province’s Geotechnical Research Center, Nanjing 210098, China;1. Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing 210098, China;2. Jiangsu Province’s Geotechnical Research Center, Nanjing 210098, China;3. Key Laboratory of High-speed Railway Engineering of the Ministry of Education, Southwest Jiaotong University, Chengdu 610031, China

Received: 2020-12-15 Accepted: 2021-09-07 Available online: 2021-08-15

Next Previous

Abstract

Current design methods for the internal stability of geosynthetic-reinforced soil (GRS) walls postulate seismic forces as inertial forces, leading to pseudo-static analyses based on active earth pressure theory, which yields unconservative reinforcement loads required for seismic stability. Most seismic analyses are limited to the determination of maximum reinforcement strength. This study aimed to calculate the distribution of the reinforcement load and connection strength required for each layer of the seismic GRS wall. Using the top-down procedure involves all of the possible failure surfaces for the seismic analyses of the GRS wall and then obtains the reinforcement load distribution for the limit state. The distributions are used to determine the required connection strength and to approximately assess the facing lateral deformation. For sufficient pullout resistance to be provided by each reinforcement, the maximum required tensile resistance is identical to the results based on the Mononobe–Okabe method. However, short reinforcement results in greater tensile resistances in the mid and lower layers as evinced by compound failure frequently occurring in GRS walls during an earthquake. Parametric studies involving backfill friction angle, reinforcement length, vertical seismic acceleration, and secondary reinforcement are conducted to investigate seismic impacts on the stability and lateral deformation of GRS walls.

Related Research