2018, Volume 4, Issue 2
Engineering >> 2018, Volume 4, Issue 2 doi: 10.1016/j.eng.2018.03.015
Design and Occupant-Protection Performance Analysis of a New Tubular Driver Airbag
a Department of Automotive Engineering, Tsinghua University, Beijing 100084, China
b Tongji University, Shanghai 200092, China
Next Previous
Abstract
An airbag is an effective protective device for vehicle occupant safety, but may cause unexpected injury from the excessive energy of ignition when it is deployed. This paper focuses on the design of a new tubular driver airbag from the perspective of reducing the dosage of gas generant. Three different dummies were selected for computer simulation to investigate the stiffness and protection performance of the new airbag. Next, a multi-objective optimization of the 50th percentile dummy was conducted. The results show that the static volume of the new airbag is only about 1/3 of the volume of an ordinary one, and the injury value of each type of dummy can meet legal requirements while reducing the gas dosage by at least 30%. The combined injury index (Pcomb) decreases by 22% and the gas dosage is reduced by 32% after optimization. This study demonstrates that the new tubular driver airbag has great potential for protection in terms of reducing the gas dosage.
Figures
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Table 2
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Table 4
References
[ 1 ] Cummins JS, Koval KJ, Cantu RV, Spratt KF. Do seat belts and air bags reduce mortality and injury severity after car accidents? Am J Orthop (Belle Mead NJ) 2011;40(3):E26–9. link1
[ 2 ] Liu ZJ, Huang TZ, Zhang JH, Yang JK. Survey of research on airbag for occupant injury prevention from vehicle impacts. J Mech Eng 2001;37(5):12–7. Chinese. link1
[ 3 ] Zhong ZH, Zhang WG, Cao LB, He W. Automotive crash safety technology. Beijing: China Machine Press; 2003. Chinese.
[ 4 ] Mendenhall IV, Taylor RD, inventors. Burn rate enhancement via metal aminotetrazole hydroxides. United States patent US 20050098246. 2005 May 12. link1
[ 5 ] Halpin JW, Burns SP, inventors; Automotive Systems Laboratory Inc, assignee. Gas generant. United States patent US 20070084531A1. 2007 Apr 12. link1
[ 6 ] Wu XL. Simulation research on dual stage inflator airbag [dissertation]. Jinzhou: Liaoning University of Technology; 2015. Chinese.
[ 7 ] Zhang TT, Wang DZ, Zhuo P, Liu JY, Zhuang X. Experiment research on passenger airbag test to front row female occupant based on Euro NCAP full width frontal impact case. J Automot Saf Energy 2016;7(4):403–11. Chinese.
[ 8 ] Zhong ZH, He W, inventors; Hunan University State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, assignee. Sandwiched tubular airbags. United States patent US 7448644. 2008 Nov 11.
[ 9 ] Huang J, He W, Yang JK, Zhong ZH. Numerical and experimental investigations on the behavior of the sandwiched tube-type airbag. Int J Crashworthines 2009;14(5):437–47. link1
[10] Hu YZ, Liang YF, Jiang CY, Liu X, Liao GJ, Feng QF, et al. Application of the occupant injury investigation in frontal crash based on THUMS model. J Automot Saf Energy 2015;6(4):379–83. Chinese.
[11] He W, Zhong ZH, Yang JK. Research on experimental validation of computer simulation of working performance of automobile airbag. J Mech Eng 2002;38 (4):126–9. Chinese. link1
[12] Liu DH, He W, Gao H, Zhong ZH. A simulation on the performance of tube-type airbag and neck protection device for the occupant protection system under special conditions. Automot Eng 2007;29(6):465–9. Chinese.
[13] Tanavde AS, Khandelwal H, Lasry D, Ni X, Haug E, Schlosser J, et al. Airbag modeling using initial metric methodology. SAE Int J Passeng Cars 1995;104 (6):1576–89. link1
[14] Lee SB, Hong SG. Parametric study on mid-mounted passenger airbag cushion using design of experiments. SAE Int J Passeng Cars 2003;112(6):604–8. link1
[15] Li L, Duan DW, Liu SL, Xiao L, Liu YB. A research on the optimization of restraint system for the protection of occupants with different statures. Automot Eng 2016;38(11):1312–8. Chinese.
[16] Jeong S, Murayama M, Yamamoto K. Efficient optimization design method using kriging model. J Aircr 2005;42(2):413–20. link1
[17] Viano DC, Arepally S. Assessing the safety performance of occupant restraint systems. SAE Int J Passeng Cars 1990;99(6):1913–39. link1
[18] Cao LB, Ouyang ZG, Xu Z, Zhang GJ. Research on the optimization of reversible restraint systems. J Mech Eng 2016;52(10):133–41. Chinese. link1
京公网安备 11010502051620号
