Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Strategic Study of CAE >> 2009, Volume 11, Issue 9

Application of orthogonal optimization design for vehicle maneuverability and structure optimum based on virtual prototyping technology

College of Mechanical Engineering, Southeast University, Nanjing 210096, China

Funding project:国家自然科学基金资助项目( 50575041 ) ; 江苏省"十五"科技攻 关资 助项 目 ( BE2003013 ) ; 江 苏省汽车工程重点实验室开放基金资助项目( QC200501 ) Received: 2008-03-19 Available online: 2009-09-14 16:21:31.000

Next Previous

Abstract

Based on the chassis of a car, a multi-body dynamics model was built with ADAMS software. With the objective evaluation index for maneuverability of vehicle, ADAMS function was built to evaluate vehicle maneuverability. Orthogonal optimization design was applied to optimizing vehicle maneuverability with ADAMS software. The applying virtual prototyping technology for vehicle maneuverability and structure orthogonal optimization not only increases accuracy of simulation model compared with lumped-mass model, but also finds the main factors influencing the vehicle maneuverability and gets the optimization levels of the influence factors. The design process can be used in industrial organization.

Figures

图1

图2

图3

图4

图5

图6

References

[ 1 ] Kim M, Yoo W, Jeong H.Sensitivity analysis of chassis system to improve shimmy and brake judder vibration on steering wheel [ A] .SAE Paper[ C] .960734 ,1996

[ 2 ] Miller G, Reed R, Wheeler R.Optimum ackerman for improved steering axle tire wear on trucks [ A] .SAE Paper[ C] .912693 , 1991

[ 3 ] 宗长富,郭孔辉.汽车操纵稳定性的客观定量评价指标[J].吉林工业大学学报(自然科学版),2001,30(1):1-6 link1

[ 4 ] 郭孔辉,陈明岚,宗长富.组合遗传算法在人—车—路闭环系统综合评价优化设计上的应用[J].中国机械工程,2001,12(7):804-807 link1

[ 5 ] 郭孔辉,丁海涛,宗长富.人—车闭环操纵性评价与优化的研究进展[J].机械工程学报,2003,39(10):27-35 link1

[ 6 ] 夏长高,宫镇.刚柔耦合多体车辆操纵稳定性研究[J].汽车工程,2004,26(5):564-567 link1

[ 7 ] Hoffman R, Louca L, Stein J, et al. Using the milliken momentmethod and dynamic simulation to evaluate vehicle stability and controllability [ A] .Proceedings of the ASME IMECE Conference [ C] .2004.173 -180

[ 8 ] Wideberg J.Simplified method for evaluation of the lateral dynam- ic behaviour of a heavy vehicle [ J ] .Heavy Vehicle Systems, 2004 , 11 ( 2 ) : 195 -207

[ 9 ] Noomwongs N, Yoshida H, Nagai M, et al. Study on handling and stability using tire hardware -in -the -loop simulator [ J] . JSAE Trans, 2003 , 35 ( 2 ) : 147 -152 link1

Related Research