2011, Volume 13, Issue 10
Strategic Study of CAE >> 2011, Volume 13, Issue 10
Original position statistic distribution analysis characterization of niobium on the vertical section of casting of superalloypneumatic plate wheel
Central Iron & Steel Research Institute, Beijing 100081, China
Next Previous
Abstract
The distribution of niobium on the vertical section of casting of GH169 superalloy pneumatic plate wheel was studied by original position statistic distribution analysis technique in the present paper. On the basis of analysis to ten thousands of primary signals at the corresponding original positions of the sample systematically, the quantitative statistic distribution information was obtained. The biggest segregation degrees of niobium in different areas of pneumatic plate wheel vertical section were calculated accurately. Two new models — the total weight ratio of niobium contents within the permissive content range (C0±R) and the confidence extension ratio of median value (K) at 95 % of confidence limit of weight ratio, were also presented. All these above methods have been used to determine the homogeneity and statistic fitting degree of niobium in the vertical section of casting of GH169 superalloy pneumatic plate wheel accurately for quality control.
Keywords
original position statistic distribution analysis ; superalloy pneumatic plate wheel ; niobium ; statistic segregation degree ; statistic fitting degree ; quality control
Figures
图1
图2
图3
图4
图5
References
[ 1 ] 王海舟.21世纪冶金分析的若干问题[J].钢铁,2000,35(1):73-78. link1
[ 2 ] 王海舟.面向新世纪的冶金材料分析[J].理化检验(化学分册),2001(2):49-52. link1
[ 3 ] 王海舟.金属原位分析系统[J].中国冶金,2002(6):20-22. link1
[ 4 ] Wang Haizhou. Original position statistic distribution analysis ( OPA) -novel statistic characterization method of different chemi- cal compositions and its states of the materials [ J] .Materials Sci- ence Forum, 2007 , 539 -543 : 4446 -4451. link1
[ 5 ] 王海舟.原位统计分布分析———材料研究及质量判据的新技术[J].中国科学(B辑),2002,32(6):481-484. link1
[ 6 ] 王海舟,赵沛,陈吉文,等.低合金钢连铸坯的原位统计分布分析研究[J].中国科学(E辑),2005,35(3):260-270. link1
[ 7 ] 王海舟,李美玲,陈吉文,等.连铸钢坯质量的原位统计分布分析研究[J].中国工程科学,2003,5(10):34-42. link1
[ 8 ] 王海舟,李美玲,张秀鑫,等.热作模具钢的原位统计分布分析[J].中国工程科学,2009,11(10):39-47. link1
[ 9 ] 杨志军,王海舟.火花光谱原位分析技术对连铸方坯质量分析的应用研究[J].钢铁,2002,37(增刊):189-193.
[10] 杨志军,王海舟.用原位分析方法研究连铸板坯的偏析和夹杂[J].钢铁,2003,38(3):61-63. link1
京公网安备 11010502051620号
