2013, Volume 15, Issue 1
Strategic Study of CAE >> 2013, Volume 15, Issue 1
New evaluation method on the precision of NC machine tools
1. School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;
2. State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Next Previous
Abstract
The performance of computerized numerical control (CNC) machine tool is evaluated by the traditional positioning error and the positioning repeatability, which is in quasi static and cannot reflect the precision of machine tool in the process of movement and machining. In this paper, a novel precision evaluation method which takes the dynamic precision as index is proposed for high-speed machine tool. The precision of machine tool is described through the consistence of the actual trajectory and the ideal command. The specific evaluation index of dynamic precision is provided. Meanwhile, the measure method of evaluation index is put forward. It can be obtained that this new evaluation method of machine tool precision can evaluate the quality of key performance in CNC machine tool systematically and roundly.
Keywords
NC machine tools ; dynamic precision ; evaluation index ; impact factors
Figures
图1
图2
图3
图4
图5
图6
References
[ 1 ] Andolfatto L，Lavernhe S，Mayer J R R. Evaluation of servo， geometric and dynamic error sources on five axis high-speed machine tool [J]. International Journal of Machine Tools & Manufacture，2011，51（10-11）：787-796. link1
[ 2 ] Mohamed Slamani，Rene Mayer，Marek Balazinski，et al. Dynamic and geometric error assessment of an XYC axis subset on five- axis high- speed machine tools using programmed and point constraint measurements [J]. International Journal of Advanced Manufacture Technology，2010，50（9-12）：1063-1073. link1
[ 3 ] Zhao Wanhua，Zhang Jun，Liu Hui，et al. Analysis on spectrum characteristic of PMLSM feed drive systems oriented to motion precision [C]. Proceedings of the 10th ICFDM，Chongqing，2012.
[ 4 ] Koren Y. Computer Control of Manufacturing Systems [M]. New York：McGraw-Hill，1983.
[ 5 ] Lee K，Ibaraki S，Matsubara A，et al. A servo parameter tuning method for high-speed NC machine tools based on contouring error measurement [C]// Laser Metrology and Machine Performance VI，Proc. of LA MDAMAP，Huddersfield，England，2003. link1
[ 6 ] Schmitz Tony L，Ziegert John C，Canning J Suzanne，et al. Case study：A comparison of error sources in high speed milling [J]. Precision Engineering，2008，32（2）：126-133. link1
[ 7 ] 洪迈生，苏 恒，李济顺. 数控机床的运动精度诊断法[C]. 第十 一届全国设备监测与诊断学术会议，无锡，2002.
[ 8 ] Kono D，Matsubara A，Yamaji I，et al. High- precision machining by measurement and compensation of motion error [J]. International Journal of Machine Tools & Manufacture，2008，48 （10）：1103-1110. link1
[ 9 ] Nakamura M，Goto S，Kyura N. Mechatronic Servo System Control [M]. Translated by Zhang Tao. Berlin：Springer- Verlag， 2004.
[10] Dieulot J Y，Thimoumi I，Colas F，et al. Numerical aspects and performances of trajectory planning methods of flexible axes [J]. International Journal of Computers，Communications and Control，2006，（I 4）：35-44. link1
[11] Cao Kun，Zhao Wanhua，Liu Hui. A novel acceleration/deceleration profile on the basis of the analysis of the motor torque frequency spectrum characteristic[C]. ASME 2012 International Mechanical Engineering Congress & Exposition. Houston，Texas，USA，2012.
[12] Poo A N，Bollinger J G，Younkin G W. Dynamic error in type 1 contouring systems [J]. IEEE Transactions on Industry Applications，1972，IA-8（4）：477-484. link1
[13] Sencer B，Altintas Y，Croft E. Modeling and control of contouring errors for five- axis machine tools- Part I：Modeling [J]. Journal of Manufacturing Science and Engineering， 2009， 131（3）：031006.1-031006.8. link1
[14] Liu Hui，Yang Xiaojun，Zhao Wanhua，et al. Research on mechatronic coupling facts of linear motor feed drive system based on spectrucm characteristics [C]. ASME 2012 International Mechanical Engineering Congress & Exposition. Houston，Texas， USA，2012. link1
[15] Yang Xiaojun，Cao Kun，Zhao Wanhua，et al. An overall analysis of servo control system influence on frequency spectrum structure of linear motor thrust [C]. ASME 2012 International Mechanical Engineering Congress & Exposition. Houston，Texas，USA，2012. link1
京公网安备 11010502051620号
