2013, Volume 15, Issue 2
Strategic Study of CAE >> 2013, Volume 15, Issue 2
Electrolyte material progress of low-temperature SOFC
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Next Previous
Abstract
Reducing the operating temperature is critically important to promote the widespread implementation of the solid oxide fuel cell (SOFC) technology due to the associated advantages including reduced materials and processing cost as well as enhanced long-term stability. The principal approach to achieve reduction in operating temperature is to reduce the electrolyte thickness and adopt alternative electrolyte materials that exhibit much higher ionic conductivities than the state-of-the-art yttria-stabilized zirconia electrolyte at comparable temperatures. Here, electrolyte materials for low-temperature SOFC, including lanthanum gallate-based, ceria-based, and bismuth oxide-based materials， were briefly reviewed. The structure and specific properties such as effects of dopants, conductivity and chemical compatibility were discussed. The merits and drawbacks of these various electrolytes were also compared.
Keywords
Figures
图1
图2
图3
图4
References
[ 1 ] Souza S D，Visco S J，Jonghe L C D. Reduced-temperature solid oxide fuel cell based on YSZ thin- film electrolyte[J]. Journal of Electrochemical Society，1997，144：35-37.
[ 2 ] Souza R A D，Maier J. A computational study of cation defects in LaGaO3[J]. Physical Chemistry Chemical Physics，2003（5）： 740-748. link1
[ 3 ] Huang K，Goodenough J B. A solid oxide fuel cell based on Srand Mg-doped LaGaO3 electrolyte：The role of a rare-earth oxide buffer [J]. Journal of Alloys and Compounds，2000，303-304： 454-464. link1
[ 4 ] Ishihara T，Akbay T，Furutani H，et al. Improved oxide ion conductivity of Co doped La0.8Sr0.2Ga0.8Mg0.2O3 perovskite type oxide [J]. Solid State Ionics，1998，113-115：585-591. link1
[ 5 ] Baker R T，Gharbage B，Marques F M B. Ionic and electronic conduction in Fe and Cr doped （La，Sr）GaO3[J]. Journal of Electrochemical Society，1997，144：3130-3135.
[ 6 ] Yamaji K，Horita T，Ishikawa M，et al. SOFC V[J]. Electrochemical Society，1997，97：1041.
[ 7 ] Kim J H，Yoo H I. Partial electronic conductivity and electrolytic domain of La0.9Sr0.1Ga0.8 Mg0.2O3[J]. Solid State Ionics，2001， 140：105-113. link1
[ 8 ] Bi Z，Yi B，Wang Z，et al. A high-performance anode-supported SOFC with LDC-LSGM bilayer electrolytes[J]. Electrochemical and Solid-State Letters，2004（7）：105-107. link1
[ 9 ] Lin Y，Barnett S A. Co-firing of anode-supported SOFCs with thin La0.9Sr0.1Ga0.8Mg0.2O3- δ electrolytes[J]. Electrochemical and SolidState Letters，2006（9）：285-288.
[10] GuoW，LiuJ，ZhangY.Electricalandstabilityperformanceofanodesupported solid oxide fuel cells with strontium- and magnesiumdoped lanthanum gallate thin electrolyte [J]. Electrochimica Acta，2008，53：4420-4427. link1
[11] Zhan Z，Han D，Wu T，et al. A solid oxide cell yielding high power density below 600 ℃[J]. RSC Advances，2012（2）：4075- 4078. link1
[12] Zhan Z，Bierschenk D M，Cronin J S，et al. A reduced temperature solid oxide fuel cell with nanostructured anodes[J]. Energy & Environmental Science，2011（4）：3951-3954. link1
[13] Ishihara T，Yan J，Shinagawa M，et al. Ni-Fe bimetallic anode as an active anode for intermediate temperature SOFC using LaGaO3 based electrolyte film[J]. Electrochimica Acta，2006， 52：1645-1650. link1
[14] Steele B C H. Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500 ℃ [J]. Solid State Ionics，2000，129：95-110. link1
[15] Shao Z P，Haile S M. A high-performance cathode for the next generation of solid-oxide fuel cells [J]. Nature，2004，431：170. link1
[16] Wang S，Katsuki M，Hashimoto T，et al. Expansion behavior of Ce1−yGdyO2.0−0.5y−δ under various oxygen partial pressures evaluated by HTXRD[J]. Journal of Electrochemical Society，2003， 150：952-958.
[17] Maricle D L，Swarr T E，Karavolis S. Enhanced ceria—a lowtemperature SOFC electrolyte[J]. Solid State Ionics，1992，52： 173-182. link1
[18] Vanier R N，Mairesse G，Abraham F，et al. Double substitutions in Bi4V2O11[J]. Solid State Ionics，1994，70/71：248-252. link1
[19] Iwahara H，Esaka T，Uchida H，et al. Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production[J]. Solid State Ionics，1981（3-4）：359-363. link1
[20] Nowick A S，Du Y. Influence of drying temperature on properties of Ni-MgO catalysts[J]. Solid State Ionics，1995，77：137-142.
[21] Nowick A S，Du Y，Liang K C. Some factors that determine proton conductivity in nonstoichiometric complex perovskites [J]. Solid State Ionics，1999，125：303-311. link1
[22] Fabbri E，Bi L，Pergolesi D，et al. Towards the next generation of solid oxide fuel cells operating below 600 ℃ with chemically stable proton- conducting electrolytes[J]. Advanced Materials， 2012，24：195-208. link1
[23] Yamazaki Y，Sanchez R H，Haile S M. High total proton conductivity in large- grained yttrium- doped barium zirconate[J]. Chemistry of Materials，2009，21：2755-2762. link1
[24] Fabbri E，Bi L，Tanaka H，et al. Chemically stable Pr and Y Co-doped barium zirconate electrolytes with high proton conductivity for intermediate- temperature solid oxide fuel cells [J]. Advanced Functional Materials，2011，21：158-166. link1
[25] Kreuer K D. Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides[J]. Solid State Ionics，1999，125：285-302. link1
[26] Haugsrud R，Norby T. High-temperature proton conductivity in acceptor- substituted rare- earth ortho- tantalates， LnTaO4 [J]. Journal of the American Ceramic Society，2007，90：1116- 1121. link1
[27] Knee C S，Nyman B J. Protonic defects in pure and doped La2Zr2O7 pyrochlore oxide[J]. Solid State Ionics，2008，178： 1642-1647. link1
京公网安备 11010502051620号
