期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

2009年 第3卷 第1期

摘要

关键词

相关研究

回顶部

《化学科学与工程前沿（英文）》 >> 2009年 第3卷 第1期 doi: 10.1007/s11705-009-0154-0

Removal of dissolved oxygen from water using a Pd-resin based catalytic reactor

1. State Key Laboratory of Urban Water Resources and Environment, School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China; 2. Heilongjiang Urban Planning and Surveying Design and Research Institute, Harbin 150040, China

发布日期： 2009-03-05
HTML17 PDF 5 收藏 0

下一篇 上一篇

摘要

The removal of dissolved oxygen (DO) from water was studied experimentally in a Pd-resin base catalyst reactor using purified hydrogen gas as a reducing agent. The effects of various operating conditions, such as hydrogen and water flow rates, height of the catalytic resin bed, temperature, pH value and run time, on the removal of DO, had been studied extensively. The results shows that DO could be removed by the reactor from ppm to ppb levels at ambient temperature. Increases of temperature, H gas rate and the height of the catalytic resin were helpful to improve the DO removal rate. The change of pH value from 4 to 12 resulted in no effect on DO removal. Reaction time was the key factor to control the DO removal efficiency. Only when the reaction time was longer than 2.3 minutes under the experimental conditions, could a very low DO level be achieved.

相关研究