摘要
The objective of this research is to evaluate an impact of asphalt mixture beams with varying sizes of aggregate in the Bending Beam Rheometer (BBR) for testing/predicting thermal cracking properties of asphalt pavements. The BBR test has following benefits: the equipment is cheaper, it uses smaller specimens, faster conditioning, easier availability for quality control, easier to manage, etc. However some concerns have been raised: some consider that the size of the aggregate may affect the test’s results; the other concern is that such small beams cannot represent the whole properties of the asphalt pavement. To address these criticisms, imaging techniques, statistical analysis, and viscoelastic modeling are used. Asphalt thin beams prepared with three different nominal maximum aggregate size (NMAS) (12.5mm, 9.5 mm, and 4.75 mm) were tested at three different temperatures (-18°C, -24°C, and -30°C). Based on results from statistical analyses and viscoelasticity, the ratio of asphalt binders and voids and stiffness differences among the three NMAS specimens are not significant, meaning that the impact of asphalt thin beams prepared with the three NMAS on the prediction of thermal cracking is minimal and can be neglected.
京公网安备 11010502051620号
