资源类型

期刊论文 132

年份

2023 10

2022 11

2021 9

2020 5

2019 3

2018 6

2017 6

2016 8

2015 4

2014 7

2013 6

2012 5

2011 8

2010 5

2009 7

2008 7

2007 8

2006 1

2005 4

2004 1

展开 ︾

关键词

可持续发展 2

圆柱 2

多联产 2

CCS 1

CO2分离 1

CO2捕集 1

COVID-19 1

PET酶 1

PET降解 1

k-ε模型 1

“∞”形 1

三维有限元 1

临时矿壁 1

互花米草 1

井壁监测 1

井壁稳定 1

井帮位移 1

亲CO2分离膜 1

人造金刚石 1

展开 ︾

检索范围：

排序： 展示方式：

3D finite element analysis of composite noise barrier constructed of polyurethane products

Ben DAEE,Hesham El NAGGAR

《结构与土木工程前沿（英文）》 2017年 第11卷 第1期   页码 100-110 doi: 10.1007/s11709-016-0364-8

摘要： This paper presents a numerical investigation on the structural performance of an innovative noise barrier consisting of poly-block, rigid polyurethane foam (RPF) and polyurea. The mechanical characteristics of RPF as well as the flexural resistance of the proposed wall system (poly-wall) were established and presented in another study. The experimental results are used in the current study to develop, calibrate and verify 3D finite element (FE) models of the wall system. The components of the poly-wall including steel rebars, poly-blocks and RPF cores were simulated and then verified using the results of experiments conducted on the wall components. The results of numerical analysis exhibited a satisfactory agreement with the experimental outcomes for the entire wall system. The verified numerical models were then used to conduct a parametric study on the performance of poly-wall models under uniform wind load and gravity load. The findings of the current study confirmed that the structural performance of poly-wall is satisfactory for noise barrier application. Simulation techniques for improvement of the numerical analysis of multi-martial 3D FE models were discussed.

关键词： 3D finite element     sound wall     rigid polyurethane foam     poly-wall     numerical model     calibration    

HTML PDF 收藏

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced

《化学科学与工程前沿（英文）》 2023年 第17卷 第2期   页码 206-216 doi: 10.1007/s11705-022-2203-x

摘要： Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is an important organic electrode for solution-processed low-cost electronic devices. However, it requires doping and post-solvent treatment to improve its conductivity, and the chemicals used for such treatments may affect the device fabrication process. In this study, we developed a novel route for exploiting ultrafast lasers (femtosecond and picosecond laser) to simultaneously enhance the conductivity and transparency of PEDOT:PSS films and fabricate patterned solution-processed electrodes for electronic devices. The conductivity of the PEDOT:PSS film was improved by three orders of magnitude (from 3.1 to 1024 S·cm–1), and high transparency of up to 88.5% (average visible transmittance, AVT) was achieved. Raman and depth-profiling X-ray photoelectron spectroscopy revealed that the oxidation level of PEDOT was enhanced, thereby increasing the carrier concentration. The surface PSS content also decreased, which is beneficial to the carrier mobility, resulting in significantly enhanced electrical conductivity. Further, we fabricated semitransparent perovskite solar cells using the as-made PEDOT:PSS as the transparent top electrodes, and a power conversion efficiency of 7.39% was achieved with 22.63% AVT. Thus, the proposed route for synthesizing conductive and transparent electrodes is promising for vacuum and doping-free electronics.

关键词： PEDOT:PSS     ultrafast laser     transparent electrode     ST-PSCs     patterning    

HTML PDF 收藏

Hydrophilic modification of poly(aryl sulfone) membrane materials toward highly-efficient environmental

《化学科学与工程前沿（英文）》 2022年 第16卷 第5期   页码 614-633 doi: 10.1007/s11705-021-2115-1

摘要： Poly(aryl sulfone) as a typical membrane material has been widely used due to excellent mechanical, chemical and thermal stability. However, the inherent hydrophobicity of poly(aryl sulfone) based membranes bears with the fouling issue during applications, which makes the membrane tending to adsorb contaminants on the surface so as to result in decreased separation performance and lifetime. In this critical review, we give a comprehensive overview on characterizations of hydrophilic membrane and diverse hydrophilic modification approaches of poly(aryl sulfone) membranes, predominantly including bulky, blending and surface modification technology. The discussions on the different modification methods have been provided in-depth. Besides, focusing on modification methods and performance of modified membranes, the related mechanisms for the performance enhancement are discussed too. At last, the perspectives are provided to guide the future directions to develop novel technology to manipulate the hydrophilicity of poly(aryl sulfone) membranes toward diverse practical and multi-functional applications.

关键词： poly(aryl sulfone)     membrane separations     modification     hydrophilicity     water treatment    

HTML PDF 收藏

Genomic and metabolomic analysis of with enhanced poly--glutamic acid production through atmospheric

《化学科学与工程前沿（英文）》 2022年 第16卷 第12期   页码 1751-1760 doi: 10.1007/s11705-022-2211-x

摘要： Poly-γ-glutamic acid is an extracellular polymeric substance with various applications owing to its valuable properties of biodegradability, flocculating activity, water solubility, and nontoxicity. However, the ability of natural strains to produce poly-γ-glutamic acid is low. Atmospheric and room temperature plasma was applied in this study to conduct mutation breeding of Bacillus licheniformis CGMCC 2876, and a mutant strain M32 with an 11% increase in poly-γ-glutamic acid was obtained. Genome resequencing analysis identified 7 nonsynonymous mutations of ppsC encoding lipopeptide synthetase associated with poly-γ-glutamic acid metabolic pathways. From molecular docking, more binding sites and higher binding energy were speculated between the mutated plipastatin synthase subunit C and glutamate, which might contribute to the higher poly-γ-glutamic acid production. Moreover, the metabolic mechanism analysis revealed that the upregulated amino acids of M32 provided substrates for glutamate and promoted the conversion between L- and D-glutamate acids. In addition, the glycolytic pathway is enhanced, leading to a better capacity for using glucose. The maximum poly-γ-glutamic acid yield of 14.08 g·L–1 was finally reached with 30 g·L–1 glutamate.

关键词： ARTP mutagenesis     Bacillus licheniformis     poly-γ-glutamic acid     metabolomics    

HTML PDF 收藏

Preparation and characterization of poly (vinylidene fluoride)/TiO

Weiying LI, Xiuli SUN, Chen WEN, Hui LU, Zhiwei WANG

《环境科学与工程前沿（英文）》 2013年 第7卷 第4期   页码 492-502 doi: 10.1007/s11783-012-0407-x

摘要： Poly(vinylidene fluoride) (PVDF)/titanium dioxide (TiO ) hybrid membranes were prepared using nano-TiO as the modifier, and characterized by Transmission Electron Microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The characterization results demonstrated that nano-sized TiO particles dispersed homogeneously within the PVDF matrix, contributing to more hydroxyls and smoother surfaces. Moreover, permeate flux, retention factor, porosity, contact angle and anti-fouling tests were carried out to evaluate the effect of TiO concentration on the performance of PVDF membranes. Among all the prepared membranes, PVDF/TiO membrane containing 10 vol.% TiO exhibited the best hydrophilicity with an average pure water flux up to 237 L·m ·h , higher than that of unmodified PVDF membranes (155 L·m ·h ). Besides, the bovine serum albumin rejection of the hybrid membrane was improved evidently from 52.3% to 70.6%, and the contact angle was significantly lowered from 83° to 60°, while the average pore size and its distribution became smaller and narrower.

关键词： poly(vinylidene fluoride) (PVDF) membrane     nano-TiO2     anti-fouling performance     water treatment    

HTML PDF 收藏

Effect of polyethylene glycol on the crystallization, rheology and foamability of poly(lactic acid) containing

《化学科学与工程前沿（英文）》 2023年 第17卷 第12期   页码 2074-2087 doi: 10.1007/s11705-023-2342-8

摘要： In this study, the rheological properties, crystallization and foaming behavior of poly(lactic acid) with polyamide 6 nanofibrils were examined with polyethylene glycol as a compatibilizer. Polyamide 6 particles were deformed into nanofibrils during drawing. For the 10% polyamide 6 case, polyethylene glycol addition reduced the polyamide 6 fibril diameter from 365.53 to 254.63 nm, owing to the smaller polyamide 6 particle size and enhanced interface adhesion. Rheological experiments revealed that the viscosity and storage modulus of the composites were increased, which was associated with the three-dimensional entangled network of polyamide 6 nanofibrils. The presence of higher aspect ratio polyamide 6 nanofibrils substantially enhanced the melt strength of the composites. The isothermal crystallization kinetics results suggested that the polyamide 6 nanofibrils and polyethylene glycol had a synergistic effect on accelerating poly(lactic acid) crystallization. With the polyethylene glycol, the crystallization half-time reduced from 103.6 to 62.2 s. Batch foaming results indicated that owing to higher cell nucleation efficiency, the existence of polyamide 6 nanofibrils led to a higher cell density and lower expansion ratio. Furthermore, the poly(lactic acid)/polyamide 6 foams exhibited a higher cell density and expansion ratio than that of the foams without polyethylene glycol.

关键词： poly(lactic acid)     foaming     microfibrillation     rheological property     crystallization    

HTML PDF 收藏

Numerical simulation of squat reinforced concrete wall strengthened by FRP composite material

Ali KEZMANE,Said BOUKAIS,Mohand Hamizi

《结构与土木工程前沿（英文）》 2016年 第10卷 第4期   页码 445-455 doi: 10.1007/s11709-016-0339-9

摘要： The advanced design rules and the latest known earthquakes, have imposed a strengthening of reinforced concrete structures. Many research works and practical achievements of the application of the external reinforcement by using FRP composite materials have been particularly developed in the recent years. This type of strengthening seems promising for the seismic reinforcement of buildings. Among of the components of structures that could affect the stability of the structure in case of an earthquake is the reinforced concrete walls, which require in many cases a strengthening, especially in case where the diagonal cracks can be developed. The intent of this paper is to present a numerical simulation of squat reinforced concrete wall strengthened by FRP composite material (carbon fiber epoxy). The intent of this study is to perform finite element model to investigate the effects of such reinforcement in the squat reinforced concrete walls. Taking advantage of a commercial finite element package ABAQUS code, three-dimensional numerical simulations were performed, addressing the parameters associated with the squat reinforced concrete walls. An elasto-plastic damage model material is used for concrete, for steel, an elastic-plastic behavior is adopted, and the FRP composite is considered unidirectional and orthotropic. The obtained results in terms of displacements, stresses, damage illustrate clearly the importance of this strengthening strategy.

关键词： simulation     strengthening     reinforced concrete wall     squat wall     FRP composite material     damage     Abaqus    

HTML PDF 收藏

Nonlinear analysis of pre-tensioned glass wall facade by stability function with initial imperfection

Siu-Lai CHAN, Yaopeng LIU, Andy LEE,

《结构与土木工程前沿（英文）》 2010年 第4卷 第3期   页码 376-382 doi: 10.1007/s11709-010-0086-2

摘要： Pre-tensioned high strength trusses using alloy steel bar are widely used as glass wall supporting systems because of the high degree of transparency. The breakage of glass panes in this type of system occurs occasionally, likely to be due to error in design and analysis in addition to other factors like glass impurity and stress concentration around opening in a spider system. Most design does not consider the flexibility of supports from finite stiffness of supporting steel or reinforced concrete beams. The resistance of lateral wind pressure of the system makes use of high tension force coupled with the large deflection effect, both of which are affected by many parameters not generally considered in conventional structures. In the design, one must therefore give a careful consideration on various effects, such as support settlement due to live loads and material creep, temperature change, pre-tension force, and wind pressure. It is not uncommon to see many similar glass wall systems fail in the wind load test chambers under a design wind speed. This paper presents a rigorous analysis and design of this type of structural systems used in a project in Hong Kong, China. The stability function with initial curvature is used in place of the cubic function, which is only accurate for linear analysis. The considerations and analysis techniques are believed to be of value to engineers involved in the design of the structural systems behaving nonlinearly.

关键词： tension system     glass wall     nonlinear analysis     pre-tensioning     second-order analysis    

HTML PDF 收藏

Design and analysis of dual fuel methanol-power poly-generation

Minghua WANG , Zheng LI , Weidou NI ,

《能源前沿（英文）》 2009年 第3卷 第3期   页码 341-347 doi: 10.1007/s11708-009-0023-z

摘要： A dual fuel head poly-generation flowsheet was designed based on coal gas and coke oven gas. To help clearly understand the system performance, a 1.2×10−3.2×10kg methanol and 274―496MW power poly-generation system was simulated by using the commercially available software ASPEN Plus and GT Pro. The technology scheme, the operating parameters, and the efficiency of the system were also analyzed and evaluated, which will be used for building industrial devices.

关键词： dual fuel     methanol-power poly-generation     CO2 and CH4 reforming     splitting ratio    

HTML PDF 收藏

Nano-hydroxyapatite formation via co-precipitation with chitosan-g-poly(

Yang YU, Hong ZHANG, Hong SUN, Dandan XING, Fanglian YAO

《化学科学与工程前沿（英文）》 2013年 第7卷 第4期   页码 388-400 doi: 10.1007/s11705-013-1355-0

摘要： With the excellent biocompatibility and osteoconductivity, nano-hydroxyapatite (nHA) has shown significant prospect in the biomedical applications. Controlling the size, crystallinity and surface properties of nHA crystals is a critical challenge in the design of HA based biomaterials. With the graft copolymer of chitosan and poly( -isopropylacrylamide) in coil and globule states as a template respectively, a novel composite from chitosan-g-poly( -isopropylacrylamide) and nano-hydroxyapatite (CS-g-PNIPAM/nHA) was prepared via co-precipitation. Zeta potential analysis, thermogravimetric analysis and X-ray diffraction were used to identify the formation mechanism of the CS-g-PNIPAM/nHA composite and its morphology was observed by transmission electron microscopy. The results suggested that the physical aggregation states of the template polymer could induce or control the size, crystallinity and morphology of HA crystals in the CS-g-PNIPAM/nHA composite. The CS-g-PNIPAM/nHA composite was then introduced to chitosan-gelatin (CS-Gel) polyelectronic complex and the cytocompatibility of the resulting CS-Gel/composite hybrid film was evaluated. This hybrid film was proved to be favorable for the proliferation of MC 3T3-E1 cells. Therefore, the CS-g-PNIPAM/nHA composite is a potential biomaterial in bone tissue engineering.

关键词： chitosan     poly(N-isopropylacrylamide)     hydroxyapatite     coil     globule     bone tissue engineering    

HTML PDF 收藏

Molecular diffusion in ternary poly(vinyl alcohol) solutions

《化学科学与工程前沿（英文）》 2022年 第16卷 第6期   页码 1003-1016 doi: 10.1007/s11705-021-2121-3

摘要： The diffusion kinetics of a molecular probe—rhodamine B—in ternary aqueous solutions containing poly(vinyl alcohol), glycerol, and surfactants was investigated using fluorescence correlation spectroscopy and dynamic light scattering. We show that the diffusion characteristics of rhodamine B in such complex systems is determined by a synergistic effect of molecular crowding and intermolecular interactions between chemical species. The presence of glycerol has no noticeable impact on rhodamine B diffusion at low concentration, but significantly slows down the diffusion of rhodamine B above 3.9% (w/v) due to a dominating steric inhibition effect. Furthermore, introducing surfactants (cationic/nonionic/anionic) to the system results in a decreased diffusion coefficient of the molecular probe. In solutions containing nonionic surfactant, this can be explained by an increased crowding effect. For ternary poly(vinyl alcohol) solutions containing cationic or anionic surfactant, surfactant–polymer and surfactant–rhodamine B interactions alongside the crowding effect of the molecules slow down the overall diffusivity of rhodamine B. The results advance our insight of molecular migration in a broad range of industrial complex formulations that incorporate multiple compounds, and highlight the importance of selecting the appropriate additives and surfactants in formulated products.

关键词： fluorescence correlation spectroscopy     poly(vinyl alcohol)     anomalous diffusion     crowding effects     dynamic light scattering     binding effects     rhodamine B    

HTML PDF 收藏

Diaphragm wall-soil-cap interaction in rectangular-closed- diaphragm-wall bridge foundations

Hua WEN, Qiangong CHENG, Fanchao MENG, Xiaodong CHEN

《结构与土木工程前沿（英文）》 2009年 第3卷 第1期   页码 93-100 doi: 10.1007/s11709-009-0015-4

摘要： Rectangular-closed-diaphragm-wall foundation is a new type of bridge foundation. Diaphragm wall-soil-cap interaction was studied using a model test. It was observed that the distribution of soil resistance under the cap is not homogeneous. The soil resistance in the corner under the cap is larger than that in the border; and that in the center is the smallest. The distribution of soil resistance under the cap will be more uniform, if the sectional area of soil core is enlarged within a certain range. Due to the existence of cap, there is a “weakening effect” in inner shaft resistance of the upper wall segments, and there is “enhancement effect” in the lower wall segments and in toe resistance. The load shearing percentage of soil resistance under the cap is 10%-20%. It is unreasonable to ignore the effects of the cap and the soil resistance under the cap in bearing capacity calculations.

关键词： diaphragm wall     bridge foundation     low cap     interaction    

HTML PDF 收藏

Seismic response of precast reinforced concrete wall subjected to cyclic in-plane and constant out-of-plane

《结构与土木工程前沿（英文）》 2021年 第15卷 第5期   页码 1128-1143 doi: 10.1007/s11709-021-0753-5

摘要： This paper provides insight into the seismic behavior of a full-scale precast reinforced concrete wall under in-plane cyclic loading combined with out-of-plane loading replicated by sand backfill to simulate the actual condition of basement walls. The tested wall exhibited flexural cracks, owing to the high aspect ratio and considerable out-of-plane movement due to lateral pressure from the backfill. The wall performed satisfactorily by exhibiting competent seismic parameters and deformation characteristics governed by its ductile response in the nonlinear phase during the test with smaller residual drift. Numerical analysis was conducted to validate experimental findings, which complied with each other. The numerical model was used to conduct parametric studies to study the effect of backfill density and aspect ratio on seismic response of the proposed precast wall system. The in-plane capacity of walls reduced, while deformation characteristics were unaffected by the increase in backfill density. An increase in aspect ratio leads to a reduction in in-plane capacity and an increase in drift. Curves between the ratio of in-plane yield capacity and design shear load of walls are proposed for the backfill density, which may be adopted to determine the in-plane yield capacity of the basement walls based on their design shear.

关键词： precast wall     basement wall     out-of-plane response     quasi-static test     sand backfill     seismic parameters    

HTML PDF 收藏

Controlled drug release of 5-amino salicylic acid by poly(2-hydroxyethylmethacrylate) grafted agar

G. Usha RANI,Kartick Prasad DEY,Srijita BHARTI,Sumit MISHRA

《化学科学与工程前沿（英文）》 2014年 第8卷 第4期   页码 465-470 doi: 10.1007/s11705-014-1452-8

摘要： The utilization of poly (2-hydroxyethylmethacrylate) grafted agar (Ag-g-P(HEMA)) as a matrix for the controlled release of 5-aminosalicylic acid was investigated. Grafted copolymers of 2-hydroxyethylmethacrylate (HEMA) monomers on agar were synthesized by microwave assisted method. drug release studies were performed at pH values of 2 and 7 in order to investigate the possibility of pH triggered release for colon targeted drug delivery. Further, the percent grafting . (the time taken for release of 50% of the enclosed drug) value was studied and the results indicate that it may be possible to develop a programmable drug release matrix based on grafted polysaccharide. Ag-g-P(HEMA) appears to be a useful matrix for controlled release.

关键词： agar     controlled drug release     5-Amino salicylic acid     poly(2-hydroxyethylmethacrylate) grafted agar    

HTML PDF 收藏

Solvent-resistant porous membranes using poly(ether−ether ketone): preparation and application

《化学科学与工程前沿（英文）》 2023年 第17卷 第10期   页码 1536-1559 doi: 10.1007/s11705-022-2221-8

摘要： Poly(ether−ether ketone) (PEEK) is a linear aromatic macromolecule, which can form semi-crystalline aggregative status, allowing PEEK materials to have strong environment tolerance and excellent physicochemical properties. PEEK materials have become a promising alternative to fabricate particular membranes used in extreme conditions. In the past few decades, many researches and evolutions have emerged in membrane fabrication with PEEK materials and its applications for treating organic solvents and their mixtures; however, there are little systematic and comprehensive literature to summarize fabrication approaches, compile applications, and elaborate PEEK property-structure relationship. In this review, the main approaches to fabricate PEEK-based membranes are illustrated concretely, including conventional thermal-induced and non-solvent-induced phase separation, and novel chemical-induced crystallization; the representative applications in ultrafiltration, nanofiltration and membrane contactor containing organic solvents are demonstrated systematically. Meanwhile, the mechanism to tune PEEK solubility in solvents, which can be achieved by altering monomers in synthesis processes or changing membrane preparation routes, is deeply analyzed. Moreover, the existing problems and the future prospects are also discussed. This review provides positive guidance for designing and fabricating membranes using PEEK and its derivative materials for task-specific applications in harsh conditions.

关键词： PEEK     phase inversion     solvent-resistant membrane     nanofiltration     membrane contactor    

HTML PDF 收藏

标题 作者 时间 类型 操作

3D finite element analysis of composite noise barrier constructed of polyurethane products

Ben DAEE,Hesham El NAGGAR

期刊论文

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced

期刊论文

Hydrophilic modification of poly(aryl sulfone) membrane materials toward highly-efficient environmental

期刊论文

Genomic and metabolomic analysis of with enhanced poly--glutamic acid production through atmospheric

期刊论文

Preparation and characterization of poly (vinylidene fluoride)/TiO

Weiying LI, Xiuli SUN, Chen WEN, Hui LU, Zhiwei WANG

期刊论文

Effect of polyethylene glycol on the crystallization, rheology and foamability of poly(lactic acid) containing

期刊论文

Numerical simulation of squat reinforced concrete wall strengthened by FRP composite material

Ali KEZMANE,Said BOUKAIS,Mohand Hamizi

期刊论文

Nonlinear analysis of pre-tensioned glass wall facade by stability function with initial imperfection

Siu-Lai CHAN, Yaopeng LIU, Andy LEE,

期刊论文

Design and analysis of dual fuel methanol-power poly-generation

Minghua WANG , Zheng LI , Weidou NI ,

期刊论文

Nano-hydroxyapatite formation via co-precipitation with chitosan-g-poly(

Yang YU, Hong ZHANG, Hong SUN, Dandan XING, Fanglian YAO

期刊论文

Molecular diffusion in ternary poly(vinyl alcohol) solutions

期刊论文

Diaphragm wall-soil-cap interaction in rectangular-closed- diaphragm-wall bridge foundations

Hua WEN, Qiangong CHENG, Fanchao MENG, Xiaodong CHEN

期刊论文

Seismic response of precast reinforced concrete wall subjected to cyclic in-plane and constant out-of-plane

期刊论文

Controlled drug release of 5-amino salicylic acid by poly(2-hydroxyethylmethacrylate) grafted agar

G. Usha RANI,Kartick Prasad DEY,Srijita BHARTI,Sumit MISHRA

期刊论文

Solvent-resistant porous membranes using poly(ether−ether ketone): preparation and application

期刊论文