Research on the Special Lifting Device for Steel Box Girders of Sutong Bridge

Chen Ming1, Wu Qihe2, Luo Chengbin1, Zhou Hanfa2

中国工程科学 ›› 2009, Vol. 11 ›› Issue (1) : 63 -68.

PDF (459KB)
中国工程科学 ›› 2009, Vol. 11 ›› Issue (1) : 63 -68.

Research on the Special Lifting Device for Steel Box Girders of Sutong Bridge

作者信息 +

Research on the special lifting devices for steel box girders of Sutong Bridge

Author information +
文章历史 +
PDF (469K)

摘要

Su-tong Bridge is a cable stayed bridge with a steel box girder and a main span of 1088 meters. The steel box girder of main-span include five portions: back span large unit, large block of pylon, standard girder, back span closure girder and middle span closure girder. Each back span large unit was fabricated by welding several deck segments together in factory, and was erected by floating crane. Due to the high of navigational clearance of the main bridge, the traditional truss lifting device couldn’t satisfy the requirement of domestic lifting cranes for this kind of lifting height and weight. Hence, a kind of lighter lifting device for the erection of back span large units was accepted for this bridge. In this paper, the design and use of this lifting device is introduced. The upper structure used lifting gantry to install the standard girder segment by cantilever method. Because the bridge’s navigation clearance is high, and the girder segment is wide and heavy, the meteorology and hydrology condition of the bridge district is abominable, and the requirements of long cable girder side pull-in, structure and performance propose high request to the lifting gantry. In this paper, the design and use key point of long cable pull-in angle adjustment device integrate into lifting gantry is introduced.

Abstract

Sutong Bridge is a cablestayed bridge with a steel box girder and a main span of 1 088 m. The steel box girder of main span includes five portions: back span large unit, large block of pylon, standard girder, back span closure girder and middle span closure girder. Each back span large unit is fabricated by welding several deck segments together in factory, and is erected by floating crane. As navigational clearance of the main bridge is high, the traditional truss lifting device can’t satisfy the requirement of domestic lifting cranes for this kind of lifting height and weight. Hence, a kind of lighter lifting device for the erection of back span large units was accepted for this bridge. In this paper, the design and use of this lifting device is introduced.The upper structure used lifting gantry to install the standard girder segment by cantilever method. Because the bridge’s navigation clearance is high, and the girder segment is wide and heavy, the meteorology and hydrology condition of the bridge district is abominable, and the requirements of long cable girder side pullin, structure and performance propose high request to the lifting gantry. In this paper, the design and use key point of long cable pullin angle adjustment device integrate into lifting gantry is introduced.

关键词

Su-tong Bridge / Large Units / Lifting Device / Cantilever installation / Lifting Gantry / Design and Use

Key words

Sutong Bridge / large units / lifting devices / cantilever installation / lifting gantry / design and use

引用本文

引用格式 ▾
Chen Ming1, Wu Qihe2, Luo Chengbin1, Zhou Hanfa2 Research on the Special Lifting Device for Steel Box Girders of Sutong Bridge[J]. 中国工程科学, 2009, 11(1): 63-68 DOI:

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

AI Summary AI Mindmap
PDF (459KB)

308

访问

0

被引

详细

导航
相关文章

AI思维导图

/