Search scope:
排序: Display mode:
Wave Interaction with a Partial Porous Double-Wall Cylinder
Teng Bin,Li Yucheng,Sun Lu
Strategic Study of CAE 2001, Volume 3, Issue 10, Pages 41-47
A linear analytic solution is derived for wave interaetion with a combined cylinder with a solid interior column surrounded by a coaxial porous exterior column. The solution is established on an eigenfunction expansion of velocity potential and a linear model between the fluid velocity inside a porous wall and the pressure difference between two sides of the wall. Numerical experiments have been carried out to examine the wave force and wave run-up on combined porous cylinders with different porous coefficient, porous section, and ratio between the radii of the interior and exterior columns. It is found that the porous rate of the exterior wall and the size of the porous section have a significant influence on the wave run-up and wave loads on cylinders. Cylinders with whole porous section on the outer column are more suitable for reducing wave loads and wave run-up on cylinders.
Keywords: wave diffraction wave force wave run-up porous structure cylinder
Peize Zhang, Haiming Wang, Wei Hong,pzzhang@seu.edu.cn,hmwang@seu.edu.cn,weihong@seu.edu.cn
Frontiers of Information Technology & Electronic Engineering 2021, Volume 22, Issue 4, Pages 471-487 doi: 10.1631/FITEE.2000489
Keywords: 毫米波通信;分簇;绕射;多路通道;传播测量
Affine formation tracking control of unmanned aerial vehicles Research Articles
Huiming LI, Hao CHEN, Xiangke WANG
Frontiers of Information Technology & Electronic Engineering 2022, Volume 23, Issue 6, Pages 909-919 doi: 10.1631/FITEE.2100109
The tracking problem for (UAVs) is considered in this paper, where fixed-wing UAVs are modeled as unicycle-type agents with asymmetrical speed constraints. A group of UAVs are required to generate and track a time-varying target formation obtained by affinely transforming a nominal formation. To handle this problem, a distributed control law based on stress matrix is proposed under the leader-follower control scheme. It is proved, theoretically, that followers can converge to the desired positions and achieve affine transformations while tracking diverse trajectories. Furthermore, a saturated control strategy is proposed to meet the speed constraints of fixed-wing UAVs, and numerical simulations are executed to verify the effectiveness of our proposed tracking control strategy in improving maneuverability.
Keywords: Affine formation Fixed-wing unmanned aerial vehicles Multi-agent system
Environment Isotope Method to Investigate the Bypass Abutment Seepage Flow in Xin'anjiang Right Dam
Chen Jiansheng,Liu Jiangang,Dong Haizhou,Chen Liang
Strategic Study of CAE 2004, Volume 6, Issue 1, Pages 57-63
Environmental isotope 2H, 18O and 3H, temperature and electric conductivity had been used to analyze bypass abutment seepage flow of Xin'anjiang right dam. Environmental isotope data on the right dam indicate the existence of bypass seepage flow in rock. The seepage water from the drainage gallery boreholes is not only from mountain precipitation but also from reservoir water that leak bypassing the right abutment. The reason of uplift cell 3E1-1 increasing is the result of the leakage from the fault F0. There is no seepage from reservoir to the grouted gallery through fault F1 under No. 6 and No. 7 dam section. Given the tritium is about 19.54 TU, the leakage water of G7-4 borehole comes from local precipitation of right dam. Part of reservoir water is proved to exist in the observation wells of right dam abutment. The data of environment also testified the result from the artificial tracer method.
Keywords: environment isotope by-pass seepage precipitation reservoir
Event-based H∞ control for piecewise-affine systems subject to actuator saturation Research Articles
Yonghao Jiang, Wei Wu, Xuyang Lou, Zhengxian Jiang, Baotong Cui,y.h.jiang@foxmail.com,weiwu@jiangnan.edu.cn,Louxy@jiangnan.edu.cn
Frontiers of Information Technology & Electronic Engineering 2021, Volume 22, Issue 5, Pages 615-766 doi: 10.1631/FITEE.1900601
Keywords: 事件触发控制;分段仿射系统;线性矩阵不等式;执行器饱和;H∞性能
Looking Back and Prospecting to the Project Design ofthe Spaceflight Launching Site in China
Zhang Zeming
Strategic Study of CAE 2007, Volume 9, Issue 4, Pages 1-5
This paper introduces the development history of the project design of spaceflight launching site in China and the main forms used in the design, and points out that there shouldn't exist only one fixed mode for the spacecraft launch. China should, according to its national condition, design and build the launching project facility and device that correspond to the technology development of spacecraft and carrier rocket.
Keywords: launching site project design development history integrated mode
Xin LI,Jin SUN,Fu XIAO,Jiang-shan TIAN
Frontiers of Information Technology & Electronic Engineering 2016, Volume 17, Issue 2, Pages 160-172 doi: 10.1631/FITEE.1500168
With shrinking technology, the increase in variability of process, voltage, and temperature (PVT) parameters significantly impacts the yield analysis and optimization for chip designs. Previous yield estimation algorithms have been limited to predicting either timing or power yield. However, neglecting the correlation between power and delay will result in significant yield loss. Most of these approaches also suffer from high computational complexity and long runtime. We suggest a novel bi-objective optimization framework based on Chebyshev affine arithmetic (CAA) and the adaptive weighted sum (AWS) method.Both power and timing yield are set as objective functions in this framework. The two objectives are optimized simultaneously to maintain the correlation between them. The proposed method first predicts the guaranteed probability bounds for leakage and delay distributions under the assumption of arbitrary correlations. Then a power-delay bi-objective optimization model is formulated by computation of cumulative distribution function (CDF) bounds. Finally, the AWS method is applied for power-delay optimization to generate a well-distributed set of Pareto-optimal solutions. Experimental results on ISCAS benchmark circuits show that the proposed bi-objective framework is capable of providing sufficient trade-off information between power and timing yield.
Keywords: Parameter variations Parametric yield Multi-objective optimization Chebyshev affine Adaptive weighted sum
Xiao-yu ZHANG
Frontiers of Information Technology & Electronic Engineering 2016, Volume 17, Issue 12, Pages 1331-1343 doi: 10.1631/FITEE.1500318
Keywords: Nonlinear system Discrete system Dynamic fuzzy logical system Direct adaptive Sliding mode control
Steel Compoisite Structural Pressure Vessel Technology
Zhu Guohui,Zhu Li,Zheng Jinyang,Zheng Chuanxiang,Chen Zhiping,Wu Hongmei
Strategic Study of CAE 2001, Volume 3, Issue 7, Pages 79-84
A Unique idea of an advanced Multi - Functional Shell and Long Period Developing Radical Requirement for engineering design and manufacture of pressure vessels is proposed in this paper. The “Steel Composite Structural Pressure Vessel Technology” (SCSPVT) invented by the authors is a unique pressure vessel technology in the world with a wide application area, including low, medium and high internal pressure fields. The main characteristics of the multi - functional shell burst arrested and resisted, manufacture simplified, defects dispersed and economical and reliable on-line status automatic monitoring, etc. The manufacture cost using this unique pressure vessel technology can be reduced by 30% to 50% . Four patented technological development systems comprised in this said unique Steel Composites Structural Pressure Vessel Technology are interoduced and summarized briefly in this paper.
Keywords: pressure vessel technology steel composites structure multi-function shell steel ribbon cross-helical wound total double layered burst arrested and resisted
A chaotic coverage path planner for the mobilerobot based on the Chebyshev map for special missions Article
Cai-hong LI, Yong SONG, Feng-ying WANG, Zhi-qiang WANG, Yi-bin LI
Frontiers of Information Technology & Electronic Engineering 2017, Volume 18, Issue 9, Pages 1305-1319 doi: 10.1631/FITEE.1601253
Keywords: Mobile robot Chebyshev map Chaotic Affine transformation Coverage path planning
Dan-Lei Yang, Dan Wang, Hao Niu, Rui-Li Wang, Mei Liu, Fei-Min Zhang, Jie-Xin Wang, Mei-Fang Zhu
Engineering 2022, Volume 8, Issue 1, Pages 138-147 doi: 10.1016/j.eng.2021.08.001
Multifunctional fillers are greatly required for dental resin composites (DRCs). In this work, a spray dryer with a three-fluid nozzle was applied for the first time to construct high-performance complex nanoparticle clusters (CNCs) consisting of different functional nanofillers for dental restoration. The application of a three-fluid nozzle can effectively avoid the aggregation of different nanoparticles with opposite zeta potentials before the spray drying process in order to construct regularly shaped CNCs. For a SiO2–ZrO2 binary system, the SiO2–ZrO2 CNCs constructed using a three-fluid nozzle maintained their excellent mechanical properties ((133.3 ± 4.7) MPa, (8.8 ± 0.5) GPa, (371.1 ± 13.3) MPa, and (64.5 ± 0.7) HV for flexural strength, flexural modulus, compressive strength, and hardness of DRCs, respectively), despite the introduction of ZrO2 nanoparticles, whereas their counterparts constructed using a two-fluid nozzle showed significantly decreased mechanical properties. Furthermore, heat treatment of the SiO2–ZrO2 CNCs significantly improved the mechanical properties and radiopacity of the DRCs. The DRCs containing over 10% mass fraction ZrO2 nanoparticles can meet the requirement for radiopaque fillers. More importantly, this method can be expanded to ternary or quaternary systems. DRCs filled with SiO2–ZrO2–ZnO CNCs with a ratio of 56:10:4 displayed high antibacterial activity (antibacterial ratio > 99%) in addition to excellent mechanical properties and radiopacity. Thus, the three-fluid nozzle spray drying technique holds great potential for the efficient construction of multifunctional cluster fillers for DRCs.
Keywords: Multifunctional cluster fillers Three-fluid nozzle spray drying Mechanical properties Antibacterial activity Radiopacity Dental resin composites
Title Author Date Type Operation
Wave Interaction with a Partial Porous Double-Wall Cylinder
Teng Bin,Li Yucheng,Sun Lu
Journal Article
Radio propagation measurement and cluster-based analysis for millimeter-wave cellular systems in dense urban environments
Peize Zhang, Haiming Wang, Wei Hong,pzzhang@seu.edu.cn,hmwang@seu.edu.cn,weihong@seu.edu.cn
Journal Article
Affine formation tracking control of unmanned aerial vehicles
Huiming LI, Hao CHEN, Xiangke WANG
Journal Article
Environment Isotope Method to Investigate the Bypass Abutment Seepage Flow in Xin'anjiang Right Dam
Chen Jiansheng,Liu Jiangang,Dong Haizhou,Chen Liang
Journal Article
Event-based H∞ control for piecewise-affine systems subject to actuator saturation
Yonghao Jiang, Wei Wu, Xuyang Lou, Zhengxian Jiang, Baotong Cui,y.h.jiang@foxmail.com,weiwu@jiangnan.edu.cn,Louxy@jiangnan.edu.cn
Journal Article
Looking Back and Prospecting to the Project Design ofthe Spaceflight Launching Site in China
Zhang Zeming
Journal Article
An efficient bi-objective optimization framework for statistical chip-level yield analysis under parameter variations
Xin LI,Jin SUN,Fu XIAO,Jiang-shan TIAN
Journal Article
Application of direct adaptive fuzzy slidingmode control into a class of non-affine discrete nonlinear systems
Xiao-yu ZHANG
Journal Article
Steel Compoisite Structural Pressure Vessel Technology
Zhu Guohui,Zhu Li,Zheng Jinyang,Zheng Chuanxiang,Chen Zhiping,Wu Hongmei
Journal Article
A chaotic coverage path planner for the mobilerobot based on the Chebyshev map for special missions
Cai-hong LI, Yong SONG, Feng-ying WANG, Zhi-qiang WANG, Yi-bin LI
Journal Article