Sewage Sludge Protein-based Fully Bio-Adhesive for Plywood

Engineering ›› DOI: 10.1016/j.eng.2025.06.046

review-article

Author information +

History +

PDF (3179KB)

Abstract

To advance sewage sludge (SS) valorization, this study proposed a novel approach that integrated protein recovery from SS with its conversion into a fully bio-based adhesive for plywood production. A thermal-alkaline pretreatment (pH = 12, 90 °C) followed by acidic precipitation enabled efficient recovery of sewage sludge protein (SSP). Compared to the commonly used sulfuric acid, citric acid partially co-precipitated with SSP, potentially promoting amidation reactions between amino and carboxyl groups during the curing process. This interaction contributed to the enhanced adhesive strength of SSP. Inspired by the catechol-mediated adhesion mechanism of mussel foot proteins, tannic acid (Tan) and Zn²⁺ ions were incorporated into the alkali-modified SSP. Covalent and hydrogen bonding occurred through cross-linking between the polyphenolic moieties of Tan and the amide/carbonyl groups of SSP, while Zn²⁺ ions served as coordination centers, further strengthening interfacial cohesion. These procedures reassembled the fragmented peptide chains of SSP, resulting in enhanced hydrophobicity, thermal stability, and mold resistance. Under optimized curing conditions (140 °C, 8 min), the resulting adhesive achieved a wet shear strength of (1.09 ± 0.08) MPa, surpassing the Chinese National Standard (≥ 0.7 MPa) by 55.7 %. X-ray micro-computed tomography revealed that 24.1 % of the adhesive penetrated the wood micropores during curing, with mechanical interlocking complementing bulk adhesion to improve shear performance. Heat-induced structural reorganization further promoted β-sheet formation and esterification between SSP peptides and Tan, thereby reinforcing the adhesive’s cross-linked architecture. Finally, a preliminary assessment of the process’s economic viability and carbon neutrality potential highlighted its promise for sustainable, engineering-scale implementation.

Keywords

Sewage sludge / Protein recovery / Value-added valorization / Bio-based adhesive

Cite this article

Download citation ▾

Gaojun Wang, Zhaofu Liu, Bo Zhang, Lingwei Wang, Qian Li, Rong Chen. Sewage Sludge Protein-based Fully Bio-Adhesive for Plywood. Engineering DOI:10.1016/j.eng.2025.06.046

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Hao X, Li J, Liu R, van MCMLoosdrecht.Resource recovery from wastewater: what, why, and where?.Environ Sci Technol 2024; 58(32):14065-14067.

[2]	Zheng M, Hu Z, Liu T, Sperandio M, Volcke EIP, Wang Z, et al.Pathways to advanced resource recovery from sewage.Nat Sustain 2024; 7(11):1395-1404.

[3]	Huang Y, Zhen Y, Liu L, Ning X, Wang C, Li K, et al.Comprehensive competitiveness assessment of four typical municipal sludge treatment routes in China based on environmental and techno-economic analysis.Sci Total Environ 2023; 895:165123.

[4]	Stegmann P, Londo M, Junginger M.The circular bioeconomy: its elements and role in European bioeconomy clusters.Resour Conserv Recycling X 2020; 6:100029.

[5]	N Dúñez, Oulego P, Collado S, Riera FA, Díaz M.Separation and purification techniques for the recovery of added-value biocompounds from waste activated sludge: a review.Resour Conserv Recycling 2022; 182:106327.

[6]	Salthammer T, Mentese S, Marutzky R.Formaldehyde in the indoor environment.Chem Rev 2010; 110(4):2536-2572.

[7]	Yang Y, Zhang Z, Zhang L, Song F, Ren Y, Zhang X, et al.Recent advances in the control of volatile organic compounds emissions from indoor wood-based panels: a comprehensive review.Sci Total Environ 2023; 884:163741.

[8]	Yang G, Gong Z, Luo X, Chen L, Shuai L.Bonding wood with uncondensed lignins as adhesives.Nature 2023; 621(7979):511-515.

[9]	Westerman CR, McGill BC, Wilker JJ.Sustainably sourced components to generate high-strength adhesives.Nature 2023; 621(7978):306-311.

[10]	Hofman AH, Van IAHees, Yang J, Kamperman M.Bioinspired underwater adhesives by using the supramolecular toolbox.Adv Mater 2018; 30(19):1704640.

[11]	Wu SJ, Zhao X.Bioadhesive Technology Platforms.Chemical Reviews 2023; 123(24):14084-14118.

[12]	Bai M, Zhang Y, Bian Y, Gao Q, Shi SQ, Cao J, et al.A novel universal strategy for fabricating soybean protein adhesive with excellent adhesion and anti-mildew performances.Chem Eng J 2023; 452:139359.

[13]	Schmidt G, Woods JT, Fung LX, Gilpin CJ, Hamaker BR, Wilker JJ.Strong adhesives from corn protein and tannic acid.Adv Sustain Syst 2019; 3(12):1900077.

[14]	Guo M, Wang G.Whey protein polymerisation and its applications in environmentally safe adhesives.Int J Dairy Technol 2016; 69(4):481-488.

[15]	Pervaiz M, Sain M.Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive.BioResources 2011; 6(2):961-970.

[16]	Xu ZX, Tan Y, Ma XQ, Li B, Chen YX, Zhang B, et al.Valorization of sewage sludge for facile and green wood bio-adhesives production.Environ Res 2023; 239:117421.

[17]	Tan Y, Pan YQ, Chen YX, Osman SM, Luque R, Xu ZX.A new type of wood bio-adhesives production: effect of hydrochar from sewage sludge on adhesives’s physicochemical properties.Sustain Chem Pharm 2024; 40:101633.

[18]	Xu ZX, Xiong HR, Dou R, Tan Y, Chen YX, Leng LJ.Hydrochar-based facile and greenwood bio-adhesives production from distilled spent grain.Chem Eng J 2024; 481:148694.

[19]	Xu ZX, Dou R, Gao F, Chen YX, Leng LJ, Osman SM, et al.Bio-adhesives derived from sewage sludge via hydrothermal carbonization: influence of aqueous phase recycling.Chem Eng J 2024; 490:151685.

[20]	Zhu HS, Tan Y, Dong XB, Gao F, Yang H, Xu ZX, et al.Formaldehyde-free wood bio-adhesives from sewage sludge: role of ammonium polyphosphate.Chem Eng J 2025; 505:159805.

[21]	Xiao K, Chen Y, Jiang X, Seow WY, He C, Yin Y, et al.Comparison of different treatment methods for protein solubilisation from waste activated sludge.Water Res 2017; 122:492-502.

[22]	Xiao K, Zhou Y.Protein recovery from sludge: a review.J Clean Prod 2020; 249:119373.

[23]	Hui W, Zhou J, Jin R.Proteins recovery from waste activated sludge by thermal alkaline treatment.J Environ Chem Eng 2022; 10(2):107311.

[24]	Krogsgaard M, Nue V, Birkedal H.Mussel-inspired materials: self-healing through coordination chemistry.Chemistry 2016; 22(3):844-857.

[25]	Felz S, Vermeulen P, van MCMLoosdrecht, Lin YM.Chemical characterization methods for the analysis of structural extracellular polymeric substances (EPS).Water Res 2019; 157:201-208.

[26]	Waterborg JH.The Lowry method for protein quantitation.J.M. Walker (Ed.), The protein protocols handbook, Humana Press, Totowa 2009; 7-10.

[27]	Tang Y, Xie H, Sun J, Li X, Zhang Y, Dai X.Alkaline thermal hydrolysis of sewage sludge to produce high-quality liquid fertilizer rich in nitrogen-containing plant-growth-promoting nutrients and biostimulants.Water Res 2022; 211:118036.

[28]	Farjami T, Sharma A, Hagen L, Jensen IJ, Falch E.Comparative study on composition and functional properties of brewer’s spent grain proteins precipitated by citric acid and hydrochloric acid.Food Chem 2024; 446:138863.

[29]	Cai Y, Huang L, Tao X, Su J, Chen B, Zhao M, et al.Adjustment of the structural and functional properties of okara protein by acid precipitation.Food Biosci 2020; 37:100677.

[30]	Canabady-Rochelle LS, Sanchez C, Mellema M, Banon S.Calcium carbonate-hydrolyzed soy protein complexation in the presence of citric acid.J Colloid Interface Sci 2010; 345(1):88-95.

[31]	Li T, Hu J, Tian R, Wang K, Li J, Qayum A, et al.Citric acid promotes disulfide bond formation of whey protein isolate in non-acidic aqueous system.Food Chem 2021; 338:127819.

[32]	Deepankumar K, Lim C, Polte I, Zappone B, Labate C, De MPSanto, et al.Supramolecular β-sheet suckerin-based underwater adhesives.Adv Funct Mater 2020; 30(16):1907534.

[33]	Hao Z, Xi X, Hou D, Lei H, Li C, Xu G, et al.A fully bio-based soy protein wood adhesive modified by citric acid with high water tolerance.Int J Biol Macromol 2023; 253:127135.

[34]	Schmidt G, Christ PE, Kertes PE, Fisher RV, Miles LJ, Wilker JJ.Underwater bonding with a biobased adhesive from tannic acid and zein protein.ACS Appl Mater Interfaces 2023; 15(27):32863-32874.

[35]	Sun J, Su J, Ma C, Göstl R, Herrmann A, Liu K, et al.Fabrication and mechanical properties of engineered protein‐based adhesives and fibers.Adv Mater 2020; 32(6):1906360.

[36]	Holl SM, Hansen D, Waite JH, Schaefer J.Solid-state NMR analysis of cross-linking in mussel protein glue.Arch Biochem Biophys 1993; 302(1):255-258.

[37]	Chen H, Wu Q, Ren X, Zhu X, Fan D.A fully bio-based adhesive with high bonding strength, low environmental impact, and competitive economic performance.Chem Eng J 2024; 494:153198.

[38]	Moghaddam SZ, Qie R, Thormann E.Making protein-based adhesives water resistant: role of protein water solubility, galloyl modification, and complexation.ACS Appl Polym Mater 2022; 4(1):18-23.

[39]	Pang H, Yan Q, Ma C, Zhang S, Gao Z.Polyphenol-metal ion redox-induced gelation system for constructing plant protein adhesives with excellent fluidity and cold-pressing adhesion.ACS Appl Mater Interfaces 2021; 13(49):59527-59537.

[40]	Zhang X, Liu Z, Cai L, Zhang X, Long C, Li J, et al.Development of a strong and conductive soy protein adhesive by building a hybrid structure based on multifunctional wood composite materials.J Clean Prod 2023; 412:137461.

[41]	Kim JR, Netravali AN.Self-healing properties of protein resin with soy protein isolate-loaded poly(d,l-lactide-co-glycolide) microcapsules.Adv Funct Mater 2016; 26(26):4786-4796.

[42]	Bai M, Cao J, Li J, Li C.Development of soybeans starch based tough, water resistant and mildew-proof adhesives through multiple cross linking cooperation strategy.J Clean Prod 2021; 321:129001.

[43]	Lei Z, Qi J, Xie J, Huang X, Jiang Y, Zhang S, et al.Epoxy oxalic acid antifungal agent reinforced soy protein adhesive with long mold resistance and high bonding strength.Int J Adhes Adhes 2023; 126:103477.

[44]	Chen S, Aladejana JT, Li X, Bai M, Shi SQ, Kang H, et al.A strong, antimildew, and fully bio-based adhesive fabricated by soybean meal and dialdehyde chitosan.Ind Crop Prod 2023; 194:116277.

[45]	Zhao Z, Zhang W, Cai W, Sun S, Yong Q.Preparation and investigation of a fully biobased adhesive composed of gum Arabic and soy protein isolate for plywood.ACS Sustain Chem Eng 2023; 11(44):16005-16014.

[46]	Evans PD, Morrison O, Senden TJ, Vollmer S, Roberts RJ, Limaye A, et al.Visualization and numerical analysis of adhesive distribution in particleboard using X-ray micro-computed tomography.Int J Adhes Adhes 2010; 30(8):754-762.

[47]	Li Z, Chu S, Zhang Y, Lin L, Liu X.Transforming interface properties of wood laminate composites functionalized by adhesive penetration.Compos B Eng 2023; 263:110859.

[48]	Shang X, Li C, Xi X, Wei Z, Wu Z, Lei H, et al.Biomass cellulose-based wood adhesive with improved water resistance and bonding strength by esterification reaction.Ind Crop Prod 2024; 222:119667.

[49]	Qu Y, Guo Q, Li T, Zhang S, Wang B, Yue H, et al.Preparation and characterization of birch plywood prepared by hot-pressed peanut meal adhesive.Int J Adhes Adhes 2022; 117:103186.