A High-Precision Workpiece Positioning System Based on Super-Resolution Microscopic Vision in Ultra-Precision Machining

Honglu Li; Zhaoyun Li; Bing Wang; Zhanqiang Liu; Muhao Xu; Pengyang Wang

doi:10.1016/j.eng.2026.07.035

Engineering ›› :202607035 DOI: 10.1016/j.eng.2026.07.035

research-article

A High-Precision Workpiece Positioning System Based on Super-Resolution Microscopic Vision in Ultra-Precision Machining

Honglu Li ^a^,^b^,^c
, Zhaoyun Li ^d
, Bing Wang ^a^,^b^,^c^,^*
, Zhanqiang Liu ^a^,^c^,^e
, Muhao Xu ^a^,^b^,^c
, Pengyang Wang ^f

Author information +

History +

PDF (3730KB)

Abstract

Ultra-precision machining generally involves multiple process steps, during which a workpiece needs to be measured offline and re-mounted. Therefore, re-clamping errors apt to cause misalignment of the workpiece between machining stages are inevitable. Even small in-plane rotations and translations can significantly degrade feature alignment and final form accuracy of the machined components during multi-step processes. To address this issue, this paper proposes a high-precision on-machine positioning system based on super-resolution microscopic vision towards accurate measurement of re-clamping errors. Specifically, the system directly uses inherent micro-scale features on the machined surface as intrinsic references to guarantee positioning accuracy. In-situ microscopic images are captured before and after re-clamping operation, and then a coarse-to-fine registration pipeline is employed. During the coarse positioning stage, robust geometric feature extraction and geometry constrained fitting can provide a reliable initial three-degree-of-freedom (3-DOF) pose estimate over large rotation and translation ranges. During the fine positioning stage, 3-DOF sub-pixel template matching is performed to accurately estimate the residual positioning error within a small search range. Furthermore, to overcome the resolution limitations of conventional microscopy, a super-resolution reconstruction module tailored to microscopic imaging is used to enhance the effective resolution of microstructure images during fine positioning. Systematic experiments demonstrate that the proposed system can achieve arcsecond-level rotational accuracy over a rotational range of 180° and translational accuracy on the scale of tens of nanometers over a translational range of 180 μm. This proposed approach is a non-contact, high-accuracy, cost-effective, and readily deployable method for practical machining environments, and it has exhibited strong potential for re-clamping pose identification and high-precision workpiece reposition during ultra-precision machining operations.

Keywords

Ultra-precision machining / Clamping errors / Precision positioning measurement / Machine vision / Image registration / Super-resolution reconstruction

Cite this article

Download citation ▾

Honglu Li, Zhaoyun Li, Bing Wang, Zhanqiang Liu, Muhao Xu, Pengyang Wang. A High-Precision Workpiece Positioning System Based on Super-Resolution Microscopic Vision in Ultra-Precision Machining. Engineering 202607035 DOI:10.1016/j.eng.2026.07.035

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Zhang ZY, Yan JW, Kuriyagawa T . Manufacturing technologies toward extreme precision. Int J Extreme Manuf 2019; 1(2):022001.

[2]	He GW, Huang QQ, Li XH, Zhou LB, Yang M, Luo YD, et al. AI—powered semiconductor wafer fabrication: a manufacturing paradigm shift. Int J Mach Tools Manuf 2026; 214:104345.

[3]	Xue B, Yan HL, Liu ZC, Yan YD, Geng YQ . Achieving tip—based down—milling forming of nanograting structures with variable heights through precise control of nano revolving trajectories. Int J Extreme Manuf 2025; 7(5):055101.

[4]	Zhao L, Zhang JJ, Zhang JG, Dai HF, Hartmaier A, Sun T . Numerical simulation of materials—oriented ultra—precision diamond cutting: review and outlook. Int J Extreme Manuf 2023; 5(2):022001.

[5]	Zhang SJ, Zhou YP, Zhang HJ, Xiong ZW, To S . Advances in ultra—precision machining of micro—structured functional surfaces and their typical applications. Int J Mach Tools Manuf 2019; 142:16-41.

[6]	Lai T, Liu JF, Chen FL, Li ZL, Guan CL, Li H, et al. Allocation of geometrical errors for developing precision measurement machine. J Intell Manuf 2025; 36(6):4105—27.

[7]	Gao W, Ibaraki S, Donmez MA, Kono D, Mayer JRR, Chen YL, et al. Machine tool calibration: measurement, modeling, and compensation of machine tool errors. Int J Mach Tools Manuf 2023; 187:104017.

[8]	Luo XC, Liu Q, Madathil AP, Xie WK, Rowe WB . Predictive digital twin—driven dynamic error control for slow—tool—servo ultraprecision diamond turning. CIRP Ann 2024; 73(1):377-80.

[9]	Yu J, Shen Z, Wang X, Sheng P, Wang Z . In situ noncontact measurement system and two—step compensation strategy for ultra—precision diamond machining. Opt Express 2018; 26(23):30724-39.

[10]	Wang P, Qu H, Zhang QL, Xu X, Yang S . Production quality prediction of multistage manufacturing systems using multi—task joint deep learning. J Manuf Syst 2023; 70:48-68.

[11]	Magnanini MC, Demir O, Colledani M, Tolio T . Performance evaluation of multi—stage manufacturing systems operating under feedback and feedforward quality control loops. CIRP Ann 2024; 73(1):349-52.

[12]	Xing TJ, Zhao XS, Song LQ, Cui ZP, Zou XC, Sun T . On—machine measurement method and geometrical error analysis in a multi—step processing system of an ultra—precision complex spherical surface. J Manuf Process 2022; 80:161-77.

[13]	Luo X. High—precision fabrication of 4m SiC aspheric mirror. Light Sci Appl 2023; 12(1):4.

[14]	Wang S, Kong L, Wang C, Cheung C . Ultra—precision manufacturing of microlens arrays using an optimum machining process chain. Opt Express 2023; 31(2):2234-47.

[15]	Chen ZQ, Yu Q, Shimada K, Liu P, He YP, Hu Y, et al. High—precision and high—efficiency fabrication of blazed grating by ultrasonic—assisted ultraprecision planing. J Mater Process Technol 2023; 311:117802.

[16]	Modarelli MJC, Kot—Thompson DM, Hoshino K . 5—Axis CNC micro—milling machine for three—dimensional microfluidics. Lab Chip 2025; 25(2):127-42.

[17]	Wang S, Zhao QL . Development of an on—machine measurement system with chromatic confocal probe for measuring the profile error of off—axis biconical free—form optics in ultra—precision grinding. Measurement 2022; 202:111825.

[18]	Geng ZC, Tong Z, Jiang XQ . Review of geometric error measurement and compensation techniques of ultra—precision machine tools. Light Adv Manuf 2021;2(2):211.

[19]	Yu YQ, Wang ZY, Zhang SZ, Ren MJ, Zhu LM, Zhang XQ . Toolpath smoothing and motion planning for the diamond turning of microlens arrays with improved uniformity. Precis Eng 2025; 95:350-63.

[20]	Kumar S, Tong Z, Jiang XQ . Advances in the design and manufacturing of novel freeform optics. Int J Extreme Manuf 2022; 4(3):032004.

[21]	Zeng Z, Zhou T, Yu Q, Zhou J, Wang G, Xie Q, et al. Alignment error modeling and control of a double—sided microlens array during precision glass molding. Microsyst Nanoeng 2024; 10(1):48.

[22]	Wang JQ, Zhu WH, Yan YD, Verma J, Zhao XS, Geng YQ . Modelling and experimental study of nanomilling 3D nanogrooves on GaSb surfaces. Int J Extreme Manuf 2026; 8(3):035101.

[23]	Möhring HC, Biermann D, Bleicher F, Melkote S, Kappmeyer G . Fixtures and workpiece clamping systems in machining. CIRP Ann 2025; 74(2):945-69.

[24]	Wang Y, Dong ZG, Tian JC, Bao Y, Kang RK, Qin Y . Deformation prediction of circular cell honeycomb under fixture—workpiece systems. Int J Mech Sci 2025; 290:110120.

[25]

Ben—Hanan U, Eckert U, Mende M, Weiss A, Wertheim R, Azaria U . Development of a pneumatic clamping system with position and force control machining. In: Proceedings of the 18th Global Conference on Sustainable Manufacturing—GCSM—Annual; 2022 Oct 5—7; Berlin, Germany. Cham: Springer Nature; 2022. p. 184-92.

[26]	Wang SX, Cheung B, Ren MJ . Uncertainty analysis of a fiducial—aided calibration and positioning system for precision manufacturing of optical freeform optics. Meas Sci Technol 2020; 31(6):065012.

[27]	Egaña F, Yagüe—Fabra JA, Mutilba U, Vez S . Machine tool integrated inverse multilateration uncertainty assessment for the volumetric characterisation and the environmental thermal error study of large machine tools. CIRP Ann 2021; 70(1):435-8.

[28]	Sun ZW, Xu SJ, Jiao J, Wang SJ, To S, Li PZ . Surface deformation errors and self—adaptive compensation for microstructured surface generation of titanium alloys. Int J Mech Sci 2022; 236:107736.

[29]	Qin Y, Kang RK, Sun JS, Wang YD, Zhu XL, Dong ZG . A fast self—calibration method of line laser sensors for on—machine measurement of honeycomb cores. Opt Lasers Eng 2022; 152:106981.

[30]	Lang W, Zhang XC, Chen YN, Chen T, Yang PD, Xu M, et al. Deterministic form—position deflectometric measurement of monolithic multi—freeform optical structures via Bayesian multisensor fusion. Light Adv Manuf 2025; 6(2):260.

[31]	Chen T, Chen YN, Zhang XC, Wang W, Xu M . Workpiece positioning and error decoupling in the single—point diamond turning of freeform mirrors based on the monoscopic deflectometry. Precis Eng 2022; 77:16-23.

[32]	Gao W, Haitjema H, Fang FZ, Leach RK, Cheung CF, Savio E, et al. On—machine and in—process surface metrology for precision manufacturing. CIRP Ann 2019; 68(2):843-66.

[33]	Wang W, Liu W, Liu Y, Zhang Y, Jia Z . Precise 2D and 3D Hybrid measurement of drill bits with complex geometries. Engineering. In press.

[34]	Gao YP, Li XY, Wang XV, Wang LH, Gao L . A Review on recent advances in vision—based defect recognition towards industrial intelligence. J Manuf Syst 2022; 62:753—66.

[35]	He WB, Jiang ZW, Ming WY, Zhang GJ, Yuan J, Yin L . A critical review for machining positioning based on computer vision. Measurement 2021; 184:109973.

[36]	Wang X, Jian ZX, Wen DZ, Zhang XQ, Zhu LM, Ren MJ . Anisotropic neural reflectance model for measuring curved machined metal surface. IEEE Trans Industr Inform 2024; 20(12):13547—58.

[37]	Jing JF, Liu SJ, Wang G, Zhang WCA, Sun CM . Recent advances on image edge detection: a comprehensive review. Neurocomputing 2022; 503:259-71.

[38]	Li HL, Fang XM, Zhu ZJ, Fu WP, Zhao CY . The approach of nanoscale vision—based measurement via diamond—machined surface topography. Measurement 2023; 214:112814.

[39]	Qiao C, Li D, Guo YT, Liu C, Jiang T, Dai QH, et al. Evaluation and development of deep neural networks for image super—resolution in optical microscopy. Nat Methods 2021; 18:194.

[40]	Zhan HY, Xing F, Bao JY, Sun T, Chen ZZ, You Z, et al. Analyzing the effect of the intra—pixel position of small PSFs for optimizing the PL of optical subpixel localization. Engineering 2023; 27:140-9.

[41]	Zuo C, Qian J, Feng S, Yin W, Li Y, Fan P, et al. Deep learning in optical metrology: a review. Light Sci Appl 2022; 11(1):39.

[42]	Ma JY, Jiang XY, Fan AX, Jiang JJ, Yan JC . Image matching from handcrafted to deep features: a survey. Int J Comput Vis 2021; 129(1):23-79.

[43]	Xu H, Yuan J, Ma J . MURF: mutually reinforcing multi—modal image registration and fusion. IEEE Trans Pattern Anal Mach Intell 2023; 45(10):12148-66.

[44]	Zhang YL, Tian YP, Kong Y, Zhong BN, Fu Y . Residual dense network for image super—resolution, In: Proceedings of the 31st IEEE/CVF Conference on Computer Vision and Pattern Recognition; 2018 Jun 18—22; Salt Lake City, UT, USA. New York City: IEEE; 2018. p. 2472—81.

[45]	Chen YB, Liu SF, Wang XL, Ieee Comp SOC. Learning continuous image representation with local implicit image function. In: Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; 2021 Jun 19—25; held vitrually. New York City: IEEE; 2021. p. 8624—34.

[46]	Pang SQ, Zhang XM, Li H, Lu YH . Edge determination improvement of scanning electron microscope images by inpainting and anisotropic diffusion for measurement and analysis of microstructures. Measurement 2021; 176:109217.

[47]	Wang ZQ, Peng YF, Fang L, Gao L . Computational optical imaging: on the convergence of physical and digital layers. Optica 2025; 12(1):113—30.

[48]	Xie X, Chen Y, Yang K, Zhou J . Harnessing the point—spread function for high—resolution far—field optical microscopy. Phys Rev Lett 2014; 113(26):263901.

[49]	Lin X, Zhou Y, Liu Y, Zhu C . A comprehensive review of image line segment detection and description: taxonomies, comparisons, and challenges. IEEE Trans Pattern Anal Mach Intell 2024; 46(12):8074-93.

[50]	Seo S. Subpixel edge localization based on adaptive weighting of gradients. IEEE Trans Image Process 2018; 27(11):5501—13.

[51]	Liu Z, Guan B, Shang Y, Yu Q, Kneip L . Line—based 6—DoF object pose estimation and tracking with an event camera. IEEE Trans Image Process 2024; 33:4765-80.

[52]	Lepcha DC, Goyal B, Dogra A, Goyal V . Image super—resolution: a comprehensive review, recent trends, challenges and applications. Inf Fusion 2023; 91:230-60.

[53]	Su H, Li Y, Xu YF, Fu X, Liu S . A review of deep—learning—based super—resolution: from methods to applications. Pattern Recognit 2025; 157:110935.

[54]	Chen HG, He XH, Qing LB, Wu YY, Ren C, Sheriff RE, et al. Real—world single image super—resolution: a brief review. Inf Fusion 2022; 79:124-45.

[55]	Jung J, Na J, Park HK, Park JM, Kim G, Lee S, et al. Super—resolving material microstructure image via deep learning for microstructure characterization and mechanical behavior analysis. npj Comput Mater 2021; 7(1):96.

[56]	Dong C, Loy CC, He K, Tang X . Image super—resolution using deep convolutional networks. IEEE Trans Pattern Anal Mach Intell 2016; 38(2):295-307.

[57]	Gao C, Feng A, Liu X, Taylor RH, Armand M, Unberath M . A fully differentiable framework for 2D/3D registration and the projective spatial transformers. IEEE Trans Med Imaging 2024; 43(1):275-85.

[58]	Gao ZR, Yi RJ, Qin Z, Ye YF, Zhu CY, Xu K . Learning accurate template matching with differentiable coarse—to—fine correspondence refinement. Comput Vis Media 2024; 10(2):309-30.

[59]	Jospin LV, Laga H, Boussaid F, Bennamoun M . Generalized closed—form formulae for feature—based subpixel alignment in patch—based matching. Int J Comput Vis 2025; 133(9):5958-75.

[60]	Lim B, Son S, Kim H, Nah S, Lee KM . Ieee, Enhanced deep residual networks for single image super—resolution. In: Proceedings of the 30th IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops; 2017 Jul 21—26; Honolulu, HI, USA. New York City: IEEE; 2017. p. 1132—40.

[61]	Hu XC, Mu HY, Zhang XY, Wang ZL, Tan TN, Sun J, et al. Meta—SR: a magnification—arbitrary network for super—resolution. In: Proceedings of the 32nd IEEE/CVF Conference on Computer Vision and Pattern Recognition; 2019 Jun 16—20; Long Beach, CA, USA. New York City: IEEE; 2019. p. 1575-84.