2022, Volume 11, Issue 4
Engineering >> 2022, Volume 11, Issue 4 doi: 10.1016/j.eng.2021.05.021
Fabrication of a Hydrophobic Hierarchical Surface on Shale Using Modified Nano-SiO2 for Strengthening the Wellbore Wall in Drilling Engineering
a Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao 266580, China
b School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China
c CNPC Engineering Technology R&D Co. Ltd., Beijing 102206, China
Next Previous
Abstract
Wellbore stability is essential for safe and efficient drilling during oil and gas exploration and development. This paper introduces a hydrophobic nano-silica (HNS) for use in strengthening the wellbore wall when using a water-based drilling fluid (WBF). The wellbore strengthening performance was studied using the linear swelling test, hot-rolling recovery test, and compressive strength test. The mechanism of strengthening the wellbore wall was studied by means of experiments on the zeta potential, particle size, contact angle, and surface tension, and with the use of a scanning electron microscope (SEM). The surface free energy changes of the shale before and after HNS treatment were also calculated using the contact angle method. The experimental results showed that HNS exhibited a good performance in inhibiting shale swelling and dispersion. Compared with the use of water, the use of HNS resulted in a 20% smaller linear swelling height of the bentonite pellets and an 11.53 times higher recovery of water-sensitive shale—a performance that exceeds those of the commonly used shale inhibitors KCl and polyamines. More importantly, the addition of HNS was effective in preventing a decrease in shale strength. According to the mechanism study, the good wellbore-strengthening performance of HNS can be attributed to three aspects. First, the positively charged HNS balances parts of the negative charges of clay by means of electrostatic adsorption, thus inhibiting osmotic hydration. Second, HNS fabricates a lotus-leaf-like surface with a micro-nano hierarchical structure on shale after adsorption, which significantly increases the water contact angle of the shale surface and considerably reduces the surface free energy, thereby inhibiting surface hydration. Third, the decrease in capillary action and the effective plugging of the shale pores reduce the invasion of water and promote wellbore stability. The approach described herein may provide an avenue for inhibiting both the surface hydration and the osmotic hydration of shale.
Keywords
Hydrophobic ; Nanoparticle ; Shale inhibitor ; Drilling fluid ; Wellbore stability
Figures
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
References
[ 1 ] Zeynali ME. Mechanical and physico-chemical aspects of wellbore stability during drilling operations. J Petrol Sci Eng 2012;82–83:120–4. link1
[ 2 ] Clarkson CR, Solano N, Bustin RM, Bustin AMM, Chalmers GRL, He L, et al. Pore structure characterization of North American shale gas reservoirs using USANS/SANS, gas adsorption, and mercury intrusion. Fuel 2013;103:606–16. link1
[ 3 ] Liu K, Ostadhassan M, Zhou J, Gentzis T, Rezaee R. Nanoscale pore structure characterization of the Bakken shale in the USA. Fuel 2017;209:567–78. link1
[ 4 ] Li C, Kong L, Ostadhassan M, Gentzis T. Nanoscale pore structure characterization of tight oil formation: a case study of the Bakken formation. Energy Fuels 2019;33(7):6008–19. link1
[ 5 ] Shadizadeh SR, Moslemizadeh A, Dezaki AS. A novel nonionic surfactant for inhibiting shale hydration. Appl Clay Sci 2015;118:74–86. link1
[ 6 ] Rao SM, Thyagaraj T, Raghuveer Rao P. Crystalline and osmotic swelling of an expansive clay inundated with sodium chloride solutions. Geotech Geol Eng 2013;31(4):1399–404. link1
[ 7 ] Anderson RL, Ratcliffe I, Greenwell HC, Williams PA, Cliffe S, Coveney PV. Clay swelling—a challenge in the oilfield. Earth Sci Rev 2010;98(3–4):201–16. link1
[ 8 ] Wilson MJ, Wilson L. Clay mineralogy and shale instability: an alternative conceptual analysis. Clay Miner 2014;49(2):127–45. link1
[ 9 ] Sun L, Tanskanen JT, Hirvi JT, Kasa S, Schatz T, Pakkanen TA. Molecular dynamics study of montmorillonite crystalline swelling: roles of interlayer cation species and water content. Chem Phys 2015;455:23–31. link1
[10] Davis A, Yeong YH, Steele A, Loth E, Bayer IS. Nanocomposite coating superhydrophobicity recovery after prolonged high-impact simulated rain. RSC Adv 2014;4(88):47222–6. link1
[11] Shi X, Wang L, Guo J, Su Q, Zhuo X. Effects of inhibitor KCl on shale expansibility and mechanical properties. Petroleum 2019;5(4):407–12. link1
[12] Gomez S, He W. Fighting wellbore instability: Customizing drilling fluids based on laboratory studies of shale-fluid interactions. In: the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition; 2012 Jul 9; Tianjin, China; 2012.
[13] Zhang S, He Y, Chen Z, Sheng JJ, Fu L. Application of polyether amine, poly alcohol or KCl to maintain the stability of shales containing Na-smectite and Ca-smectite. Clay Miner 2018;53(1):29–39. link1
[14] Bai X, Wang H, Luo Y, Zheng X, Zhang X, Zhou S, et al. The structure and application of amine-terminated hyperbranched polymer shale inhibitor for water-based drilling fluid. J Appl Polym Sci 2017;134(46):45466. link1
[15] Xie G, Luo P, Deng M, Su J, Wang Z, Gong R, et al. Intercalation behavior of branched polyethyleneimine into sodium bentonite and its effect on rheological properties. Appl Clay Sci 2017;141:95–103. link1
[16] Huang X, Shen H, Sun J, Lv K, Liu J, Dong X, et al. Nanoscale laponite as a potential shale inhibitor in water-based drilling fluid for stabilization of wellbore stability and mechanism study. ACS Appl Mater Interfaces 2018;10 (39):33252–9. link1
[17] Shettigar RR, Misra NM, Patel K. Cationic surfactant (CTAB) a multipurpose additive in polymer-based drilling fluids. J Pet Explor Prod Technol 2018;8 (2):597–606. link1
[18] Lv K, Huang X, Li H, Sun J, Du W, Li M. Modified bio-surfactant cationic alkyl polyglycoside as an effective additive for inhibition of highly reactive shale. Energy Fuels 2020;34(2):1680–7. link1
[19] Yin S, Yan F. Improving the wellbore stability of shale formation with water activity regflation. Fresenius Environ Bull 2019;28:7492–501.
[20] Ismail AR, Mohd NMNA, Basir NF, Oseh JO, Ismail I, Blkoor SO. Improvement of rheological and filtration characteristics of water-based drilling fluids using naturally derived henna leaf and hibiscus leaf extracts. J Pet Explor Prod Technol 2020;10(8):3541–56. link1
[21] Huang W, Li X, Qiu Z, Jia J, Wang Y, Li X. Inhibiting the surface hydration of shale formation using preferred surfactant compound of polyamine and twelve alkyl two hydroxyethyl amine oxide for drilling. J Petrol Sci Eng 2017;159:791–8. link1
[22] Yue Y, Chen S, Wang Z, Yang X, Peng Y, Cai J, et al. Improving wellbore stability of shale by adjusting its wettability. J Petrol Sci Eng 2018;161:692–702. link1
[23] Chu Q, Lin L, Su J. Amidocyanogen silanol as a high-temperature-resistant shale inhibitor in water-based drilling fluid. Appl Clay Sci 2020;184:105396. link1
[24] Ahmad HM, Kamal MS, Murtaza M, Khan S, Al-Harthi M. Alteration of wettability and hydration properties of shale using ionic liquids in waterbased drilling fluids. In: the Abu Dhabi International Petroleum Exhibition & Conference; 2019 Nov 11; Abu Dhabi, UAE; 2019.
[25] Liang L, Luo D, Liu X, Xiong J. Experimental study on the wettability and adsorption characteristics of Longmaxi Formation shale in the Sichuan Basin, China. J Nat Gas Sci Eng 2016;33:1107–18. link1
[26] Liang L, Xiong J, Liu X. Experimental study on crack propagation in shale formations considering hydration and wettability. J Nat Gas Sci Eng 2015;23:492–9. link1
[27] API RP 13B-1: Recommended practice for field testing water-based drilling fluids. US standard. Washington, DC: American Petroleum Institute; 2019.
[28] Abe K, Takiguchi H, Tamada K. Dynamic contact angle measurement of Au (111) thiol self-assembled monolayers by the Wilhelmy Plate method. Langmuir 2000;16(5):2394–7. link1
[29] Gindl M, Sinn G, Gindl W, Reiterer A, Tschegg S. A comparison of different methods to calculate the surface free energy of wood using contact angle measurements. Colloids Surf A 2001;181(1–3):279–87. link1
[30] Wang P, Zhao T, Bian R, Wang G, Liu H. Robust superhydrophobic carbon nanotube film with lotus leaf mimetic multiscale hierarchical structures. ACS Nano 2017;11(12):12385–91. link1
[31] Bhushan B, Jung YC, Koch K. Self-cleaning efficiency of artificial superhydrophobic surfaces. Langmuir 2009;25(5):3240–8. link1
[32] Lafuma A, Quéré D. Superhydrophobic states. Nat Mater 2003;2(7):457–60. link1
京公网安备 11010502051620号
