期刊首页 优先出版 当期阅读 过刊浏览 作者中心 关于期刊 English

2013年 第7卷 第4期

摘要

关键词

相关研究

回顶部

《环境科学与工程前沿（英文）》 >> 2013年 第7卷 第4期 doi: 10.1007/s11783-012-0407-x

Preparation and characterization of poly (vinylidene fluoride)/TiO

1. State Key Laboratory of Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Tongji University, Shanghai 200092, China; 2. Key Laboratory of Yangtze Water Environment of Ministry of Education, School of Environmental Science and Engineering, Tongji University, Shanghai 200092, China; 3. School of Environmental and Chemical Engineering, Tianjin Polytechnic University, Tianjin 300160, China

发布日期： 2013-08-01
HTML18 PDF 1 收藏 0

下一篇 上一篇

摘要

Poly(vinylidene fluoride) (PVDF)/titanium dioxide (TiO ) hybrid membranes were prepared using nano-TiO as the modifier, and characterized by Transmission Electron Microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The characterization results demonstrated that nano-sized TiO particles dispersed homogeneously within the PVDF matrix, contributing to more hydroxyls and smoother surfaces. Moreover, permeate flux, retention factor, porosity, contact angle and anti-fouling tests were carried out to evaluate the effect of TiO concentration on the performance of PVDF membranes. Among all the prepared membranes, PVDF/TiO membrane containing 10 vol.% TiO exhibited the best hydrophilicity with an average pure water flux up to 237 L·m ·h , higher than that of unmodified PVDF membranes (155 L·m ·h ). Besides, the bovine serum albumin rejection of the hybrid membrane was improved evidently from 52.3% to 70.6%, and the contact angle was significantly lowered from 83° to 60°, while the average pore size and its distribution became smaller and narrower.

相关研究