资源类型

期刊论文 39

年份

2024 2

2023 4

2022 4

2021 3

2020 3

2017 1

2015 1

2014 1

2013 3

2012 1

2011 1

2010 6

2009 3

2008 1

2005 1

2000 2

展开 ︾

关键词

H2O/CO2共电解 1

合成气 1

固体氧化物电解池 1

基础油 1

大规模非并网风电；金属；清洗；预防腐；前处理 1

武器三用油 1

水净化 1

水爆清砂 1

水电解 1

消除方法 1

润滑 1

添加剂 1

清洁 1

清洁生产 1

电解效率 1

目标检测；水环境；垃圾清理机器人；改进YOLOv4 1

粗晶 1

脱盐 1

膜分离 1

展开 ︾

检索范围：

排序： 展示方式：

A thermodynamic study of the removal of HCl and H

Joseph LEE, Bo FENG

《化学科学与工程前沿（英文）》 2012年 第6卷 第1期   页码 67-83 doi: 10.1007/s11705-011-1162-4

摘要： Advanced integrated-gasification combined-cycle (IGCC) and integrated-gasification fuel cell (IFGC) systems require high-temperature sorbents that are capable of removing hydrogen chloride and hydrogen sulfide from coal derived gases to very low levels. HCl and H S are highly reactive, corrosive, and toxic gases that must be removed to meet stringent environmental regulations, to protect power generation equipment and to control the emissions of contaminants. The thermodynamic behavior of 13 sorbents for the removal of HCl and H S under various conditions including: initial toxic gas concentration (1–10000 ppm), operating pressure (0.1–11 Mpa), temperature (300 K–1500 K), and the presence of H O were investigated. The correlation between HCl and H S was also examined. Thermodynamic calculations were carried out for the reactions of the 13 sorbents using a FactSage 5.2 software package based on free energy minimization. The sorbents, Na CO , NaHCO , K CO , and CaO are capable of completely removing chlorine at high temperatures (up to ~1240 K) and at high pressures. Water vapor did not have any significant effects on the dechlorination capability of the sorbents. Nine of the sorbents namely; Cu O, Na CO , NaHCO , K CO , CaO, ZnO, MnO, FeO, and PbO, were determined to have great potential as desulfurization sorbents. Cu O and ZnO had the best performance in terms of the optimum operating temperature. The addition of water vapor to the reactant gas produces a slightly detrimental effect on most of the sorbents, but FeO exhibited the worst performance with a reduction in the maximum operating temperature of about 428 K. The dechlorination performance of the alkali sorbents was not affected by the presence of H S in the reactions. However, the desulfurization capability of some sorbents was greatly affected by the presence of HCl. Particularly, the performance of Cu O was significantly reduced when HCl was present, but the performance of FeO improved remarkably. The thermodynamic results gathered are valuable for the developments of better sorbents.

关键词： syngas cleaning     sorbent     desulfurization     dechlorination    

HTML PDF 收藏

Synthesis of novel magneto-hybrid polyoxometalate composite membrane with simultaneous photocatalytic self-cleaning

《化学科学与工程前沿（英文）》 2023年 第17卷 第10期   页码 1450-1459 doi: 10.1007/s11705-023-2310-3

摘要： Membrane technology is ideal for removing aqueous humic acid, but humic acid deposits cause membrane fouling, a significant challenge that limits its application. Herein, this work proposed an alternative approach to the controllably magnetically induced magneto-hybrid polyoxometalate (magneto-HPOM) nanocomposite migration toward the polyethersulfone (PES) membrane surface under a magnetic field to enhance the self-cleaning and antifouling functionalities of the membrane. Before incorporating magneto-HPOM nanocomposite into the PES casting solution, functionalized magnetite nanoparticles (F-MNP) were first coated with HPOM photocatalyst to fabricate a magneto-HPOM-PES membrane. It was shown that the apparent impacts of this novel magneto-HPOM-PES membrane on the hydrophilic behavior and photocatalytic properties of the magneto-HPOM nanocomposite improve the hydrophilicity, separation performance, antifouling and self-cleaning properties of the membrane compared with neat PES membrane. Furthermore, after exposure to ultraviolet light, the magneto-HPOM-PES membrane can be recovered after three cycles with a flux recovery ratio of 107.95%, 100.06%, and 95.56%, which is attributed to the temporal super hydrophilicity effect. Meanwhile, the magneto-HPOM-PES membrane could efficiently maintain 100% humic acid rejection for the first and second cycles and 99.81% for the third cycle. This study revealed a novel approach to fabricating membranes with high antifouling and self-cleaning properties for water treatment.

关键词： magneto-hybrid polyoxometalate nanocomposite     composite membrane     antifouling     self-cleaning     magnetic and photocatalytic responsiveness    

HTML PDF 收藏

Formation of disinfection by-products during sodium hypochlorite cleaning of fouled membranes from membrane

《环境科学与工程前沿（英文）》 2021年 第15卷 第5期 doi: 10.1007/s11783-021-1389-3

摘要：

•HAAs was dominant among the DBPs of interest.

关键词： MBR     Biofouling     EPS     Chemical cleaning     DBPs     CLSM    

HTML PDF 收藏

Experimental and kinetic study on laminar flame speeds of ammonia/syngas/air at a high temperature and

《能源前沿（英文）》 2022年 第16卷 第2期   页码 263-276 doi: 10.1007/s11708-021-0791-7

摘要： The laminar flame speeds of ammonia mixed with syngas at a high pressure, temperature, and different syngas ratios were measured. The data obtained were fitted at different pressures, temperatures, syngas ratios, and equivalence ratios. Four kinetic models (the Glarborg model, Shrestha model, Mei model, and Han model) were compared and validated with experimental data. Pathway, sensitivity and radical pool analysis are conducted to find out the deep kinetic insight on ammonia oxidation and NO formation. The pathway analysis shows that H abstraction reactions and NHi combination reactions play important roles in ammonia oxidation. NO formation is closely related to H, OH, the O radical produced, and formation reactions. NO is mainly formed from reaction, HNO+ H= NO+ H2. Furthermore, both ammonia oxidation and NO formation are sensitive to small radical reactions and ammonia related reactions.

关键词： ammonia mixed with syngas     laminar flame speed     kinetic model     sensitivity analysis     pathway analysis    

HTML PDF 收藏

Boosting the direct conversion of NHHCO electrolyte to syngas on Ag/Zn zeolitic imidazolate framework

《化学科学与工程前沿（英文）》 2023年 第17卷 第9期   页码 1196-1207 doi: 10.1007/s11705-022-2289-1

摘要： The electrochemical reduction of NH4HCO3 to syngas can bypass the high energy consumption of high-purity CO2 release and compression after the ammonia-based CO2 capture process. This technology has broad prospects in industrial applications and carbon neutrality. A zeolitic imidazolate framework-8 precursor was introduced with different Ag contents via colloid chemical synthesis. This material was carbonized at 1000 °C to obtain AgZn zeolitic imidazolate framework derived nitrogen carbon catalysts, which were used for the first time for boosting the direct conversion of NH4HCO3 electrolyte to syngas. The AgZn zeolitic imidazolate framework derived nitrogen carbon catalyst with a Ag/Zn ratio of 0.5:1 achieved the highest CO Faradaic efficiency of 52.0% with a current density of 1.15 mA·cm–2 at –0.5 V, a H2/CO ratio of 1–2 (–0.5 to –0.7 V), and a stable catalytic activity of more than 6 h. Its activity is comparable to that of the CO2-saturated NH4HCO3 electrolyte. The highly discrete Ag-Nx and Zn-Nx nodes may have combined catalytic effects in the catalysts synthesized by appropriate Ag doping and sufficient carbonization. These nodes could increase active sites of catalysts, which is conducive to the transport and adsorption of reactant CO2 and the stability of *COOH intermediate, thus can improve the selectivity and catalytic activity of CO.

关键词： Ag catalyst     zeolitic imidazolate framework     CO2 electroreduction     ammonium bicarbonate electrolyte     syngas    

HTML PDF 收藏

Syngas composition study

Zhe WANG , Jinning YANG , Zheng LI , Yong XIANG ,

《能源前沿（英文）》 2009年 第3卷 第3期   页码 369-372 doi: 10.1007/s11708-009-0044-7

摘要： The syngas composition characteristic was investigated in the real slurry-feed gasifier using a detailed gas phase reaction mechanism. The results show that the time for syngas to reach equilibrium is much shorter than the residence time for slurry feed entrained-flow gasifiers, indicating a gas phase species partial equilibrium state. Further calculation shows that the four major species, CO, CO, H, and HO, are in equilibrium via the reaction Bayu PRABOWO,Herri SUSANTO,Kentaro UMEKI,Mi YAN,Kunio YOSHIKAWA. [J]. Front. Energy, 2015, 9(3): 362-370.Ashok Jayawant Rao KECHE, Gaddale AMBA PRASAD RAO. [J]. Front Energ, 2013, 7(3): 300-306.Souman RUDRA, H. T. KIM, Jinwook LEE, L. ROSENDAHL, . [J]. Front. Energy, 2010, 4(3): 402-413. Fuchen WANG , Xinwen ZHOU , Wenyuan GUO , Zhenghua DAI , Xin GONG , Haifeng LIU , Zunhong YU , . [J]. Front. Energy, 2009, 3(1): 117-122.

关键词： entrained-flow     gasifier     syngas    

HTML PDF 收藏

Process analysis of syngas production by non-catalytic POX of oven gas

Fuchen WANG , Xinwen ZHOU , Wenyuan GUO , Zhenghua DAI , Xin GONG , Haifeng LIU , Zunhong YU ,

《能源前沿（英文）》 2009年 第3卷 第1期   页码 117-122 doi: 10.1007/s11708-008-0078-2

摘要： A non-catalytic POX of oven gas is proposed to solve the problem of secondary pollution due to solid wastes produced from the great amount of organic sulfur contained in oven gas in the traditional catalytic partial oxidation (POX) process. A study of the measurement of flow field and a thermodynamic analysis of the process characteristics were conducted. Results show that there exist a jet-flow region, a recirculation-flow region, a tube-flow region, and three corresponding reaction zones in the non-catalytic POX reformer. The combustion of oven gas occurs mainly in the jet-flow region, while the reformation of oven gas occurs mainly in the other two regions. Soot would not be formed by CH cracking at above 1200°C. Since there are very little C hydrocarbons in oven gas, the soot produced would be very tiny, even if they underwent cracking reaction. The integrated model for entrained bed gasification process was applied to simulate a non-catalytic POX reformer. It indicated that the proper oxygen-to-oven gas ratio is 0.22–0.28 at different pressures in the oven gas reformation process.

关键词： oven gas     non-catalytic POX process     syngas    

HTML PDF 收藏

Energy and exergy analysis of syngas production from different biomasses through air-steam gasification

S. Rupesh,C. Muraleedharan,P. Arun

《能源前沿（英文）》 2020年 第14卷 第3期   页码 607-619 doi: 10.1007/s11708-016-0439-1

摘要： Gasification is a thermo-chemical reaction which converts biomass into fuel gases in a reactor. The efficiency of conversion depends on the effective working of the gasifier. The first step in the conversion process is the selection of a suitable feedstock capable of generating more gaseous fuels. This paper analyses the performance of different biomasses during gasification through energy and exergy analysis. A quasi-equilibrium model is developed to simulate and compare the feasibility of different biomass materials as gasifier feedstock. Parametric studies are conducted to analyze the effect of temperature, steam to biomass ratio and equivalence ratio on energy and exergy efficiencies. Of the biomasses considered, sawdust has the highest energy and exergy efficiencies and lowest irreversibility. At a gasification temperature of 1000 K, the steam to biomass ratio of unity and the equivalence ratio of 0.25, the energy efficiency, exergy efficiency and irreversibility of sawdust are 35.62%, 36.98% and 10.62 MJ/kg, respectively. It is also inferred that the biomass with lower ash content and higher carbon content contributes to maximum energy and exergy efficiencies.

关键词： gasification     modeling     energy     exergy     syngas    

HTML PDF 收藏

SIMULATION OF O-BLOWN CO-GASIFICATION OF WOOD CHIP AND POTATO PEEL FOR PRODUCING SYNGAS

《农业科学与工程前沿（英文）》 2023年 第10卷 第3期   页码 448-457 doi: 10.15302/J-FASE-2023490

摘要：

● Low-value biowaste including wood chip and potato peel was valorized to syngas.

关键词： Aspen Plus     co-gasification     potato peel     syngas     simulation     waste reduction     wood chip    

HTML PDF 收藏

一种新型的多功能油——清洁润滑防护武器三用油

冯薇荪,汪孟言

《中国工程科学》 2000年 第2卷 第4期   页码 53-58

摘要：

武器三用油是一种不同于传统润滑油的油品。它不仅功能多，而且性能优异，可供陆、海、空三军在各种不同气候条件下使用；也可以广泛用于车辆、船舶、工厂、建筑物等民用设施。由于一种油品同时要具备多种功能，因此必需精心设计配方，考虑不同基础油及各种添加剂的配伍性，扬长避短，发挥增效作用，避免不利因素。在三用油研制过程中，考察了各种影响因素，将矛盾的各个方面很好地统一在一个油品中，获得了能满足各项要求的清洁、润滑、防护武器三用油。

关键词： 武器三用油     基础油     添加剂     清洁     润滑     防护    

HTML PDF 收藏

Bamboo-like -doped carbon nanotubes encapsulating M(Co, Fe)-Ni alloy for electrochemical production of syngas

《化学科学与工程前沿（英文）》 2022年 第16卷 第4期   页码 498-510 doi: 10.1007/s11705-021-2082-6

摘要： The electrochemical conversion of CO2-H2O into CO-H2 using renewable energy is a promising technique for clean syngas production. Low-cost electrocatalysts to produce tunable syngas with a potential-independent CO/H2 ratio are highly desired. Herein, a series of N-doped carbon nanotubes encapsulating binary alloy nanoparticles (MxNi-NCNT, M= Fe, Co) were successfully fabricated through the co-pyrolysis of melamine and metal precursors. The MxNi-NCNT samples exhibited bamboo-like nanotubular structures with a large specific surface area and high degree of graphitization. Their electrocatalytic performance for syngas production can be tuned by changing the alloy compositions and modifying the electronic structure of the carbon nanotube through the encapsulated metal nanoparticles. Consequently, syngas with a wide range of CO/H2 ratios, from 0.5:1 to 3.4:1, can be produced on MxNi-NCNT. More importantly, stable CO/H2 ratios of 2:1 and 1.5:1, corresponding to the ratio to produce biofuels by syngas fermentation, could be realized on Co1Ni-NCNT and Co2Ni-NCNT, respectively, over a potential window of –0.8 to –1.2 V versus the reversible hydrogen electrode. Our work provides an approach to develop low-cost and potential-independent electrocatalysts to effectively produce syngas with an adjustable CO/H2 ratio from electrochemical CO2 reduction.

关键词： electrochemical reduction of CO2     syngas     N-doped carbon nanotubes     encapsulated alloy nanoparticles     CO/H2 ratio    

HTML PDF 收藏

Syngas production by photoreforming of formic acid with 2D VWN solid solution as an efficient cocatalyst

《能源前沿（英文）》 doi: 10.1007/s11708-024-0940-x

摘要： Formic acid (FA) is a potential biomass resource of syngas with contents of carbon monoxide (CO, 60 wt.%) and hydrogen (H2, 4.4 wt.%). Among the technologies for FA conversion, the photoreforming of FA has received widespread attention due to its use of green solar energy conversion technology and mild reaction conditions. Herein, a V–W bimetallic solid solution, VxW1−xN1.5 with efficient co-catalytic properties was first and facilely synthesized. When CdS was used as a photocatalyst, the activity performance of the V0.1W0.9N1.5 system was over 60% higher than that of the W2N3 system. The computational simulations and experiments showed the V0.1W0.9N1.5 had great metallic features and large work functions, contributing a faster photo-generated carrier transfer and less recombination, finally facilitating a great performance in cocatalyst for syngas production in photoreforming FA. This work provides an approach to synthesizing novel transition metal nitrides for photocatalysis.

关键词： photocatalysis     syngas     formic acid     cocatalyst     solid solution    

HTML PDF 收藏

Scientometric analysis of research trends on solid oxide electrolysis cells for green hydrogen and syngas

《能源前沿（英文）》 doi: 10.1007/s11708-024-0945-5

摘要： Solid oxide electrolysis cell (SOEC) is a promising water electrolysis technology that produces hydrogen or syngas through water electrolysis or water and carbon dioxide co-electrolysis. Green hydrogen or syngas can be produced by SOEC with renewable energy. Thus, SOEC has attracted continuous attention in recent years for the urgency of developing environmentally friendly energy sources and achieving carbon neutrality. Focusing on 1276 related articles retrieved from the Web of Science (WoS) database, the historical development of SOECs are depicted from 1983 to 2023 in this paper. The co-occurrence networks of the countries, source journals, and author keywords are generated. Moreover, three main clusters showing different content of the SOEC research are identified and analyzed. Furthermore, the scientometric analysis and the content of the high-cited articles of the research of different topics of SOECs: fuel electrode, air electrode, electrolyte, co-electrolysis, proton-conducting SOECs, and the modeling of SOECs are also presented. The results show that co-electrolysis and proton-conducting SOECs are two popular directions in the study of SOECs. This paper provides a straightforward reference for researchers interested in the field of SOEC research, helping them navigate the landscape of this area of study, locate potential partners, secure funding, discover influential scholars, identify leading countries, and access key research publications.

关键词： solid oxide electrolysis cell (SOEC)     scientometric review     knowledge network     material development     H2O–CO2 co-electrolysis     modeling    

HTML PDF 收藏

Enrichment of CO from syngas with Cu(I)Y adsorbent by five-bed VPSA

Shuna LI, Huawei YANG, Donghui ZHANG

《化学科学与工程前沿（英文）》 2013年 第7卷 第4期   页码 472-481 doi: 10.1007/s11705-013-1351-4

摘要： Cu(I)Y adsorbent was prepared by reduction of Cu(II)Y which was prepared by ion exchange between the NaY zeolite and a solution of Cu(II) chloride. The dynamic adsorption capacity of Cu(I)Y for CO was calculated by adsorption breakthrough curve measured on a fixed bed at 30°C and 0.006 MPa (g) of CO partial pressure. The calculated CO adsorption capacity was 2.14 mmol/g, 37.5 times as much as that of NaY zeolite. The adsorption breakthrough curve experiment was also simulated with Aspen Adsorption software and the results were approximately consistent with experimental results. Then a five-bed VPSA process for separating CO from syngas on this adsorbent was dynamically simulated with Aspen Adsorption software with the adsorption pressure of 0.68 MPa (g) and the desorption pressure of -0.075 MPa (g). The results showed that CO was enriched from 32.3% to 95.16%–98.12%, and its recovery was 88.47%–99.44%.

关键词： Cu(I)Y adsorbent     breakthrough curve     desorption     VPSA     simulation    

HTML PDF 收藏

Experimental investigations on combustion characteristics of syngas composed of CH

Qingwei FAN, Shien HUI, Qulan ZHOU, Qinxin ZHAO, Tongmo XU

《化学科学与工程前沿（英文）》 2010年 第4卷 第4期   页码 404-410 doi: 10.1007/s11705-010-0513-x

摘要： The residual gas and remained raw gas in dual gas resources polygeneration system are quite complex in components (mainly CH , CO, and H ), and these results to the distinguished differences in combustion reaction. Experimental investigations on basic combustion characteristics of syngas referred above are conducted on a laboratory-scale combustor with flame temperature and flue gas composition measured and analyzed. Primary air coefficient (PA), total air coefficient (TA), and components of the syngas (CS) are selected as key factors, and it is found that PA dominates mostly the ignition of syngas and NO formation, while TA affects the flue gas temperature after high temperature region and NO formation trend to be positive as H /CO components increase. The results provide references for industrial utilization.

关键词： dual gas resources polygeneration     lean premixed combustion     residual gas     remained raw gas     NOx emission    

HTML PDF 收藏

标题 作者 时间 类型 操作

A thermodynamic study of the removal of HCl and H

Joseph LEE, Bo FENG

期刊论文

Synthesis of novel magneto-hybrid polyoxometalate composite membrane with simultaneous photocatalytic self-cleaning

期刊论文

Formation of disinfection by-products during sodium hypochlorite cleaning of fouled membranes from membrane

期刊论文

Experimental and kinetic study on laminar flame speeds of ammonia/syngas/air at a high temperature and

期刊论文

Boosting the direct conversion of NHHCO electrolyte to syngas on Ag/Zn zeolitic imidazolate framework

期刊论文

Syngas composition study

Zhe WANG , Jinning YANG , Zheng LI , Yong XIANG ,

期刊论文

Process analysis of syngas production by non-catalytic POX of oven gas

Fuchen WANG , Xinwen ZHOU , Wenyuan GUO , Zhenghua DAI , Xin GONG , Haifeng LIU , Zunhong YU ,

期刊论文

Energy and exergy analysis of syngas production from different biomasses through air-steam gasification

S. Rupesh,C. Muraleedharan,P. Arun

期刊论文

SIMULATION OF O-BLOWN CO-GASIFICATION OF WOOD CHIP AND POTATO PEEL FOR PRODUCING SYNGAS

期刊论文

一种新型的多功能油——清洁润滑防护武器三用油

冯薇荪,汪孟言

期刊论文

Bamboo-like -doped carbon nanotubes encapsulating M(Co, Fe)-Ni alloy for electrochemical production of syngas

期刊论文

Syngas production by photoreforming of formic acid with 2D VWN solid solution as an efficient cocatalyst

期刊论文

Scientometric analysis of research trends on solid oxide electrolysis cells for green hydrogen and syngas

期刊论文

Enrichment of CO from syngas with Cu(I)Y adsorbent by five-bed VPSA

Shuna LI, Huawei YANG, Donghui ZHANG

期刊论文

Experimental investigations on combustion characteristics of syngas composed of CH

Qingwei FAN, Shien HUI, Qulan ZHOU, Qinxin ZHAO, Tongmo XU

期刊论文