2022, Volume 9, Issue 2
Engineering >> 2022, Volume 9, Issue 2 doi: 10.1016/j.eng.2021.07.022
Fabrication of a High-Performance and Reusable Planar Face Mask in Response to the COVID-19 Pandemic
a State Key Laboratory of Organic–Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China
b Dawn Polymer (Beijing) Technology Co., Ltd., Beijing 101599, China
c Beijing Municipal Institute of Labor Protection, Beijing 100054, China
d Beijing Institute of Medical Device Testing, Beijing 101111, China
e School of Materials Design & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China
Next Previous
Abstract
The coronavirus disease 2019 (COVID-19) pandemic has caused a surge in demand for face masks, with the massive consumption of masks leading to an increase in resource-related and environmental concerns. In this work, we fabricated meltblown polypropylene (mb-PP)-based high-performance planar face masks and investigated the effects of six commonly used disinfection methods and various mask-wearing periods on the reusability of these masks. The results show that, after three cycles of treatment using hot water at 70 °C for 30 min, which is one of the most scalable, user-friendly methods for viral disinfection, the particle filtration efficiency (PFE) of the mask remained almost unchanged. After mask wearing for 24 h and subsequent disinfection using the same treatment procedures, the PFE decreased to 91.3%; the average number of bacterial and fungal colonies was assessed to be 9.2 and 51.6 colony-forming units per gram （CFU∙g−1）, respectively; and coliform and pyogenic bacteria were not detected. Both the PFE and the microbial indicators are well above the standard for reusable masks after disinfection. Schlieren photography was then used to assess the capabilities of used and disinfected masks during use; it showed that the masks exhibit a high performance in suppressing the spread of breathed air.
Keywords
Mask ; Reusable ; Particle filtration efficiency ; Disinfection ; Schlieren photography
Figures
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
References
[ 1 ] World Health Organization (WHO). WHO coronavirus (COVID-19) dashboard [Internet]. Geneva: WHO; [cited 2021 Sep 29]. Available from: https://covid19. who.int. link1
[ 2 ] COVID-19—United Kingdom of Great Britain and Northern Ireland [Internet]. Geneva: WHO; 2020 Dec 21 [cited 2021 Sep 29]. Available from: https://www. who.int/emergencies/disease-outbreak-news/item/2020-DON304. link1
[ 3 ] Karim N, Afroj S, Lloyd K, Oaten LC, Andreeva DV, Carr C, et al. Sustainable personal protective clothing for healthcare applications: a review. ACS Nano 2020;14(10):12313–40. link1
[ 4 ] Kutter JS, Spronken MI, Fraaij PL, Fouchier RA, Herfst S. Transmission routes of respiratory viruses among humans. Curr Opin Virol 2018;28:142–51. link1
[ 5 ] Stelzer-Braid S, Oliver BG, Blazey AJ, Argent E, Newsome TP, Rawlinson WD, et al. Exhalation of respiratory viruses by breathing, coughing, and talking. J Med Virol 2009;81(9):1674–9. link1
[ 6 ] Milton DK, Fabian MP, Cowling BJ, Grantham ML, McDevitt JJ. Influenza virus aerosols in human exhaled breath: particle size, culturability, and effect of surgical masks. PLoS Pathog 2013;9(3):e1003205. link1
[ 7 ] Lam DSC, Wong RLM, Lai KHW, Ko CN, Leung HY, Lee VYW, et al. COVID-19: special precautions in ophthalmic practice and FAQs on personal protection and mask selection. Asia Pac J Ophthalmol 2020;9(2):67–77.
[ 8 ] Fineberg HV. Rapid expert consultation on the possibility of bioaerosol spread of SARS-CoV-2 for the COVID-19 pandemic (April 1, 2020). In: Proceedings of rapid expert consultations on the COVID-19 pandemic; 2020 Mar 14–Apr 8; Washington, DC: National Academies Press; 2020. p. 3.
[ 9 ] Tellier R. Review of aerosol transmission of influenza A virus. Emerg Infect Dis 2006;12(11):1657–62. link1
[10] Yan J, Grantham M, Pantelic J, de Mesquita PJB, Albert B, Liu F, et al.; EMIT Consortium. Infectious virus in exhaled breath of symptomatic seasonal influenza cases from a college community. Proc Natl Acad Sci USA 2018;115 (5):1081–6.
[11] Chua MH, Cheng W, Goh SS, Kong J, Li B, Lim JYC, et al. Face masks in the new COVID-19 normal: materials, testing, and perspectives. Research 2020;2020:7286735. link1
[12] Ranney ML, Griffeth V, Jha AK. Critical supply shortages—the need for ventilators and personal protective equipment during the COVID-19 pandemic. N Engl J Med 2020;382(18):e41. link1
[13] Jung S, Lee S, Dou X, Kwon EE. Valorization of disposable COVID-19 mask through the thermo-chemical process. Chem Eng J 2021;405:126658. link1
[14] Lee S, Cho AR, Park D, Kim JK, Han KS, Yoon IJ, et al. Reusable polybenzimidazole nanofiber membrane filter for highly breathable PM2.5 dust proof mask. ACS Appl Mater Inter 2019;11(3):2750–7. link1
[15] Canopoli L, Coulon F, Wagland ST. Degradation of excavated polyethylene and polypropylene waste from landfill. Sci Total Environ 2020;698:134125. link1
[16] Ji D, Fan L, Li X, Ramakrishna S. Addressing the worldwide shortages of face masks. BMC Mater 2020;2(1):9. link1
[17] Liao L, Xiao W, Zhao M, Yu X, Wang H, Wang Q, et al. Can N95 respirators be reused after disinfection? How many times? ACS Nano 2020;14(5):6348–56. link1
[18] Konda A, Prakash A, Moss GA, Schmoldt M, Grant GD, Guha S. Aerosol filtration efficiency of common fabrics used in respiratory cloth masks. ACS Nano 2020;14(5):6339–47. link1
[19] Zangmeister CD, Radney JG, Vicenzi EP, Weaver JL. Filtration efficiencies of nanoscale aerosol by cloth mask materials used to slow the spread of SARSCoV-2. ACS Nano 2020;14(7):9188–200. link1
[20] Ma T, Shutler N. How to sew a fabric face mask. New York: The New York Times; 2020 Mar 31 [cited 2021 Sep 29]. Available from: https://www. nytimes.com/article/how-to-make-face-mask-coronavirus.html. link1
[21] National Center for Immunization and Respiratory Diseases (US), Division of Viral Diseases. Use of cloth face coverings to help slow the spread of COVID-19 [Internet]. Atlanta: Centers for Disease Control and Prevention; 2020 Apr 10 [cited 2020 Dec 18]. Available from: https://stacks.cdc.gov/view/cdc/87542. link1
[22] Phan TL, Ching CTS. A reusable mask for coronavirus disease 2019 (COVID-19). Arch Med Res 2020;51(5):455–7. link1
[23] Saini V, Sikri K, Batra SD, Kalra P, Gautam K. Development of a highly effective low-cost vaporized hydrogen peroxide-based method for disinfection of personal protective equipment for their selective reuse during pandemics. Gut Pathog 2020;12(1):29. link1
[24] Ma QX, Shan H, Zhang CM, Zhang HL, Li GM, Yang RM, et al. Decontamination of face masks with steam for mask reuse in fighting the pandemic COVID-19: experimental supports. J Med Virol 2020;92(10):1971–4. link1
[25] Mackenzie D. Reuse of N95 masks. Engineering 2020;6(6):593–6. link1
[26] Luiso S, Henry JJ, Pourdeyhimi B, Fedkiw PS. Fabrication and characterization of meltblown poly(vinylidene difluoride) membranes. ACS Appl Polym Mater 2020;2(7):2849–57. link1
[27] Yeo JH, Kim M, Lee H, Cho J, Park J. Facile and novel eco-friendly poly(vinyl alcohol) nanofilters using the photocatalytic property of titanium dioxide. ACS Omega 2020;5(10):5026–33. link1
[28] Ullah S, Ullah A, Lee J, Jeong Y, Hashmi M, Zhu C, et al. Reusability comparison of melt-blown vs nanofiber face mask filters for use in the coronavirus pandemic. ACS Appl Nano Mater 2020;3(7):7231–41. link1
[29] Zhong H, Zhu Z, Lin J, Cheung CF, Lu VL, Yan F, et al. Reusable and recyclable graphene masks with outstanding superhydrophobic and photothermal performances. ACS Nano 2020;14(5):6213–21. link1
[30] Yeo JCC, Kai D, Teng CP, Lin EMJR, Tan BH, Li Z, et al. Highly washable and reusable green nanofibrous sorbent with superoleophilicity, biodegradability, and mechanical robustness. ACS Appl Polym Mater 2020;2 (11):4825–35. link1
[31] Liu H, Zhang S, Liu L, Yu J, Ding B. High-performance filters from biomimetic wet-adhesive nanoarchitectured networks. J Mater Chem A 2020;8 (36):18955–62. link1
[32] Zhang GH, Zhu QH, Zhang L, Yong F, Zhang Z, Wang SL, et al. High-performance particulate matter including nanoscale particle removal by a self-powered air filter. Nat Commun 2020;11(1):1653. link1
[33] Huang L, Xu S, Wang Z, Xue K, Su J, Song Y, et al. Self-reporting and photothermally enhanced rapid bacterial killing on a laser-induced graphene mask. ACS Nano 2020;14(9):12045–53. link1
[34] Lee H, Jeon S. Polyacrylonitrile nanofiber membranes modified with Ni-based conductive metal organic frameworks for air filtration and respiration monitoring. ACS Appl Nano Mater 2020;3(8):8192–8. link1
[35] Choi YH, Lee J, Khang DY. A reusable, isoporous through-hole membrane filter for airborne particulate matter removal. J Membr Sci 2020;612:118474. link1
[36] Zhang Q, Li Q, Young TM, Harper DP, Wang S. A novel method for fabricating an electrospun poly(vinyl alcohol)/cellulose nanocrystals composite nanofibrous filter with low air resistance for high-efficiency filtration of particulate matter. ACS Sustain Chem Eng 2019;7(9):8706–14. link1
[37] Zhou M, Fang M, Quan Z, Zhang H, Qin X, Wang R, et al. Large-scale preparation of micro-gradient structured sub-micro fibrous membranes with narrow diameter distributions for high-efficiency air purification. Environ Sci Nano 2019;6(12):3560–78. link1
[38] Soltani S, Khanian N, Choong TSY, Rashid U. Recent progress in the design and synthesis of nanofibers with diverse synthetic methodologies: characterization and potential applications. New J Chem 2020;44 (23):9581–606. link1
[39] Song J, Liu Z, Li Z, Wu H. Continuous production and properties of mutil-level nanofiber air filters by blow spinning. RSC Adv 2020;10 (33):19615–20. link1
[40] Swennen GRJ, Pottel L, Haers PE. Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks. Int J Oral Maxillofac Surg 2020;49(5):673–7. link1
[41] Tan NPB, Paclijan SS, Ali HNM, Hallazgo CMJS, Lopez CJF, Ebora YC. Solution blow spinning (SBS) nanofibers for composite air filter masks. ACS Appl Nano Mater 2019;2(4):2475–83. link1
[42] Wang D, Sun BC, Wang JX, Zhou YY, Chen ZW, Fang Y, et al. Can masks be reused after hot water decontamination during the COVID-19 pandemic? Engineering 2020;6(10):1115–21. link1
[43] Zhang L, Wang D, Tian H, Zhao H, Yue W, Zhang B, et al. T/BJFX 0001–2020: Reusable civil mask. Chinese standard. Beijing: Beijing Industry Association of Garments and Textiles; 2020. Chinese.
[44] Bradley JW, Oh JS, Olabanji OT, Hale C, Mariani R, Kontis K. Schlieren photography of the outflow from a plasma jet. IEEE Trans Plasma Sci 2011;39 (11):2312–3. link1
[45] Fang Y, Dulaney AR, Gadley J, Maia J, Ellison CJ. A comparative parameter study: controlling fiber diameter and diameter distribution in centrifugal spinning of photocurable monomers. Polymer 2016;88:102–11. link1
[46] Yarin AL, Sinha-Ray S, Pourdeyhimi B. Meltblowing: multiple polymer jets and fiber-size distribution and lay-down patterns. Polymer 2011;52(13):2929–38. link1
[47] Ellison CJ, Phatak A, Giles DW, Macosko CW, Bates FS. Melt blown nanofibers: fiber diameter distributions and onset of fiber breakup. Polymer 2007;48 (11):3306–16. link1
[48] Chin AWH, Chu JTS, Perera MRA, Hui KPY, Yen H-L, Chan MCW, et al. Stability of SARS-CoV-2 in different environmental conditions. Lancet Microbe 2020;1 (1):e10. link1
[49] Li IWS, Fan JKM, Lai ACK, Lo CM. Home-made masks with filtration efficiency for nano-aerosols for community mitigation of COVID-19 pandemic. Public Health 2020;188:42–50. link1
京公网安备 11010502051620号
