2015, Volume 10, Issue 1
Frontiers of Mechanical Engineering >> 2015, Volume 10, Issue 1 doi: 10.1007/s11465-015-0323-4
A Stoneley wave method to detect interlaminar damage of metal layer composite pipe
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
Next Previous
Abstract
The interlaminar defect is a major form of damage in metal layer composite pipes which are widely used in petroleum and chemical industry. In this paper, a Stoneley wave method is presented to detect interlaminar damage in laminated pipe structure. Stoneley wave possesses some good characteristics, such as high energy and large displacement at the interface and non-dispersive in the high-frequency, so the sensitivity of detecting interlaminar damage can be improved and the higher frequency can be used in damage detection compared with Lamb waves. Additionally, as the frequency increases, the wavelength of the Stoneley wave reduces. Thus, its ability to detect small defects at the interface is enhanced. Finite element model of metal layer composite pipe with interlaminar damage is used to simulate wave propagation of Lamb waves and Stoneley wave, respectively. The damage location is calculated by using the Stoneley wave signal obtained from finite element model, and then the results are compared with the actual damage locations. The simulation examples demonstrate that the Stoneley wave method can better identify the interlaminar damage in laminated pipe structure compared with Lamb waves.
Keywords
京公网安备 11010502051620号
