Resource Type

Journal Article 7

Year

2022 1

2019 1

2015 1

2014 2

2013 1

2009 1

Keywords

baffle 3

heat transfer 3

CFD 1

CFD simulation 1

Nusselt number 1

city road tunnel 1

ethanol-water 1

eye-shaped 1

flow rate 1

forced convection 1

heat exchanger 1

heat transfer coefficient 1

helical baffle 1

helical flow 1

hollow fiber 1

mass-transfer 1

membrane contactor 1

multiphase model 1

nanofluid 1

natural ventilation 1

open ︾

Search scope:

排序： Display mode:

Impacts of opening baffle of city road tunnels on natural ventilation performance

Weixiao YANG, Jincheng XING, Jianxing LI, Jihong LING, Haixian HAO, Zhiqiang YAN

Frontiers of Structural and Civil Engineering 2013, Volume 7, Issue 1,   Pages 55-61 doi: 10.1007/s11709-013-0194-x

Abstract: Based on the opening baffle mode for natural ventilation of city road tunnels, this paper studies theimpacts of opening baffle on natural ventilation performance by verifying numerical simulation throughBy analyzing the impacts of installation angle, dimension, location, and quantity of opening baffle onexhaust could increase by at least 30% compared to when there is no baffle. 2) The baffle reaches itsof a single baffle is better than that of multiple baffles.

Keywords： city road tunnel     numerical simulation     baffle     top opening     natural ventilation    

HTML PDF Collect

Performance of vertical axis water turbine with eye-shaped baffle for pico hydropower

Zhuohuan HU, Dongcheng WANG, Wei LU, Jian CHEN, Yuwen ZHANG

Frontiers in Energy 2022, Volume 16, Issue 4,   Pages 683-696 doi: 10.1007/s11708-020-0689-9

Abstract: The turbine with an eye-shaped vertical water baffle was developed to evaluate the hydraulic performanceThe effects of the opening diameter of the water baffle and installation angle of the rotor on the flowThe results suggested that the water baffle opening at = 30 mm and the rotor at a 52° angle could achieveThe proper eye-shaped baffle not only accelerates the fluid flow and generates positive hydrodynamic

Keywords： vertical axis water turbine     eye-shaped     vertical water baffle     pico hydropower    

HTML PDF Collect

Experimental study of heat transfer coefficient with rectangular baffle fin of solar air heater

Foued CHABANE,Nesrine HATRAF,Noureddine MOUMMI

Frontiers in Energy 2014, Volume 8, Issue 2,   Pages 160-172 doi: 10.1007/s11708-014-0321-y

Abstract: paper presents an experimental analysis of a single pass solar air collector with, and without using baffle

Keywords： Nusselt number     flow rate     heat transfer     heat transfer coefficient     thermal efficiency     forced convection    

HTML PDF Collect

Characteristics of flow and heat transfer of shell-and-tube heat exchangers with overlapped helical baffles

Tingting DU, Wenjing DU

Frontiers of Engineering Management 2019, Volume 6, Issue 1,   Pages 70-77 doi: 10.1007/s42524-019-0005-8

Abstract:

The characteristics of flow and heat transfer of shell-and-tube heat exchangers with overlapped helical baffles (STHXsHB) were illustrated through a theoretical analysis and numerical simulation. The ideal helical flow model was constructed to demonstrate parts of the flow characteristics of the STHXsHB, providing theoretical evidence of short-circuit and back flows in a triangular zone. The numerical simulation was adopted to describe the characteristics of helical, leakage, and bypass streams. In a fully developed section, the distribution of velocity and wall heat transfer coefficient has a similar trend, which presents the effect of leakage and bypass streams. The short-circuit flow accelerates the axial velocity of the flow through the triangular zone. Moreover, the back flow enhances the local heat transfer and causes the ascent of flow resistance. This study shows the detailed features of helical flow in STHXsHB, which can inspire a reasonable optimization on the shell-side structure.

Keywords： heat exchanger     overlapped helical baffle     triangular zone     helical flow    

HTML PDF Collect

Application of different CFD multiphase models to investigate effects of baffles and nanoparticles on heat transfer enhancement

Ali SHAHMOHAMMADI,Arezou JAFARI

Frontiers of Chemical Science and Engineering 2014, Volume 8, Issue 3,   Pages 320-329 doi: 10.1007/s11705-014-1437-7

Abstract: numbers in the range of 600 to 2100, the heat transfer of nanofluid flowing in the geometry without baffleis greater than that of water flowing through a tube with baffle, whereas the difference between theseeffects (nanofluid and baffle) decreases with increasing the Reynolds number.At higher Reynolds numbers (2100–3000) the baffle has a greater effect on heat transfer enhancement than

Keywords： CFD simulation     heat transfer     nanofluid     baffle     single phase model     multiphase model    

HTML PDF Collect

CFD simulation on shell-and-tube heat exchangers with small-angle helical baffles

Minhua ZHANG,Fang MENG,Zhongfeng GENG

Frontiers of Chemical Science and Engineering 2015, Volume 9, Issue 2,   Pages 183-193 doi: 10.1007/s11705-015-1510-x

Abstract: is employed, and the calculated results show that among the three baffle shapes the heat exchangers witha 1/4 sector helical baffle have the lowest pressure drop.At = 10° and 20°, 1/4 sector helical baffle heat exchangers show the best integrative performance;at = 30°, 1/4 ellipse and 1/4 sector helical baffle heat exchangers perform almost the same.

Keywords： heat transfer     pressure drop     helical baffle     CFD    

HTML PDF Collect

Effects of baffles on separation of aqueous ethanol solution with hollow fibers

Zhihong YANG, Guoliang ZHANG, Lan LIN, Danping REN, Qin MENG, Hongzi ZHANG

Frontiers of Chemical Science and Engineering 2009, Volume 3, Issue 1,   Pages 68-72 doi: 10.1007/s11705-009-0130-8

Abstract: The effects of baffles on the operation and mass-transfer characteristics in novel hollow fiber membrane contactor used in distillation were investigated. Hollow fiber membranes, coated with a 7 μm polydimethyl-siloxane, were operated as structural packing in the separation of ethanol-water solutions. The parallel flow mode was chosen for separation due to the stronger driving force of the concentration difference, in which liquid flows through the lumens of the fibers and vapor flows countercurrent-wise outside the fibers. Two baffles were installed on the shell side of the membrane contactors to enhance separation, which had a round shape with a semi-lunar hole. The results show that both baffled and unbaffled membrane contactors gave better, more productive separations than traditional packing in distillation, such as the excellent Sulzer Gauze BX structured packing. The baffled membrane contactors performed better than unbaffled ones, especially at high vapor velocities. The minimal HTU of membrane contactor with baffles could reach as low as 4.5 cm, and almost all the contactors could work well above the limit where flooding normally occurs in conventional cases. Theoretical analysis predicted that baffles helped membrane module to obtain a higher mass-transfer coefficient and a smaller mass-transfer resistance. Finally, theoretical mass-transfer coefficient and experimental value were compared as well as the contribution of each individual mass-transfer coefficients among liquid, gas and membrane.

Keywords： hollow fiber     membrane contactor     baffle     mass-transfer     ethanol-water    

HTML PDF Collect

Title Author Date Type Operation

Impacts of opening baffle of city road tunnels on natural ventilation performance

Weixiao YANG, Jincheng XING, Jianxing LI, Jihong LING, Haixian HAO, Zhiqiang YAN

Journal Article

Performance of vertical axis water turbine with eye-shaped baffle for pico hydropower

Zhuohuan HU, Dongcheng WANG, Wei LU, Jian CHEN, Yuwen ZHANG

Journal Article

Experimental study of heat transfer coefficient with rectangular baffle fin of solar air heater

Foued CHABANE,Nesrine HATRAF,Noureddine MOUMMI

Journal Article

Characteristics of flow and heat transfer of shell-and-tube heat exchangers with overlapped helical baffles

Tingting DU, Wenjing DU

Journal Article

Application of different CFD multiphase models to investigate effects of baffles and nanoparticles on heat transfer enhancement

Ali SHAHMOHAMMADI,Arezou JAFARI

Journal Article

CFD simulation on shell-and-tube heat exchangers with small-angle helical baffles

Minhua ZHANG,Fang MENG,Zhongfeng GENG

Journal Article

Effects of baffles on separation of aqueous ethanol solution with hollow fibers

Zhihong YANG, Guoliang ZHANG, Lan LIN, Danping REN, Qin MENG, Hongzi ZHANG

Journal Article