The design and calculation of the delayed neutron detection system for PWR and CEFR

Liu Yupu、 Qiu Chunhua

Strategic Study of CAE ›› 2009, Vol. 11 ›› Issue (4) : 61-67.

PDF(520 KB)
PDF(520 KB)
Strategic Study of CAE ›› 2009, Vol. 11 ›› Issue (4) : 61-67.

The design and calculation of the delayed neutron detection system for PWR and CEFR

  • Liu Yupu、 Qiu Chunhua
Author information +
History +

Abstract

This paper discussed the importance of the delayed neutron detection system. We improved the delayed neutron detection station and delayed neutron detector, so the noise was greatly decreased and the detection efficiency was greatly increased. After the improvement the stability of the detector was enhanced and the false alarm was eliminated. We introduced the principle of the gas lift pump designed for the sodium cooled fast reactor. A calculation model of the failed fuel detection system of CEFR was proposed, and from the model a code using LabWindows/CVI was developed. The minimum broken area that could be detected by the delayed neutron detection system of CEFR was calculated and the delayed neutron detection signal in a few representative transient conditions during fuel failure happened was stimulated.

Keywords

reactor / fuel failure / delayed neutron / gas lift pump / calculation model

Cite this article

Download citation ▾
Liu Yupu, Qiu Chunhua. The design and calculation of the delayed neutron detection system for PWR and CEFR. Strategic Study of CAE, 2009, 11(4): 61‒67
AI Summary AI Mindmap
PDF(520 KB)

Accesses

Citations

Detail

Sections
Recommended

/