2002, Volume 4, Issue 12
Strategic Study of CAE >> 2002, Volume 4, Issue 12
Application and Prospects of Water Jet Technology in Petroleum Engineering
College of Petroleum Engineering, University of Petroleum , Dongying, Shandong 257061, China
Next Previous
Abstract
This paper presents the study and applications of water jet technology in petroleum engineering. A mathematic model of pressure and water power attenuation, under the condition of submergence and nonfreedom, is setup through experiments. A novel method and its model are established to gain maximum hydraulic power at bottomhole and optimize water parameters. In addition, the basic equation and structure model of two kinds of resonating chamber are set up according to transient flow theory and hydro-acoustics. Under the impact of drilling biaxial stress, a model of predicting the fracture propagation is founded utilizing rock fracture mechanics. On the base of above models and theories, three new kinds of bits, i.e. extended nozzle roller bit, self-resonating water jet bit and combined jet and mechanical rock-cutting bit, are developed. Also, the paper points the prospects of applications of water jet technology in deep-well drilling, low-permeability reservoir production, and enhanced oil production.
Keywords
water jet technology ; oil well drilling ; oil & gas production ; high and ultra-high pressure jet
Figures
图1
图2
图3
图4
图5
References
[ 1 ] LabusTJ .FluidJetTechnology:FundamentalsandApplications[M ].WaterjetTechnologyAssociation, Missouri, USA , 1995
[ 2 ] 沈忠厚.水射流理论与技术[M ].东营:石油大学出版社, 1998:1～7 link1
[ 3 ] ShenZhonghou, SunQingxiao.AStudyonthepressureattenuationofsubmergednon freejetandamethodofcalculationforbottomhalehydraulic parameters[J].SPEDrillingEngineering, 1988, 3 (1) :69～76
[ 4 ] KendallHA&GoinsWCJr.Design&operationofjet bitprogramsformaximumhydraulichorsepower, impactforce, orjetvelocity[J].JournalofPetroleumTechnology, Oct.1960:238～247
[ 5 ] ShenZhonghou.WaterJetTechnologyinPetroleumEngineering[M ].Dongying:PetroleumUniversityPress, 1997
[ 6 ] ShenZhonghou, LiGensheng, WangZhiming.Newjettheoryand prospectsofapplicationinpetroleumengineering[A ].Proceedingsofthe13thWorldPetroleumCongress[C ], BuenosAires, Argentina1991:397～405
[ 7 ] 李根生, 马加计, 沈晓明, 等.高压水射流处理地层机理及试验[J].石油学报, 1998, 19 (1) :96～99 link1
[ 8 ] 李根生, 张德斌, 等.自激波动注水机理与实验[J].石油学报, 2002, 23 (6) link1
[ 9 ] 袁建强, 沈忠厚.机械和水力联合破岩的力学模型[J].江汉石油学院学报, 1993, 15 (4) link1
[10] 袁建强, 沈忠厚.射流喷射角及方位影响破岩效果的研究[J].石油钻探技术, 1992, 20 (4) :39～42
[11] 王瑞和, 周卫东, 沈忠厚, 等.旋转射流破岩钻孔机理研究[J].中国安全科学学报, 1999, 9:1～5 link1
[12] 杨永印, 沈忠厚, 王瑞和, 等.径向水平井钻进技术实验研究[J].石油钻探技术, 1998, 26 (1) :4～8 link1
京公网安备 11010502051620号
