2004, Volume 6, Issue 9
Strategic Study of CAE >> 2004, Volume 6, Issue 9
Study on Finite Element Method for Calculation of Stress on External Ring of One-way Clutch
1. Hunan University of Science and Technology , Xiangtan , Hunan 411201 , China
2. Wuhan University of Technology , Wuhan 430000 , China
Next Previous
Abstract
At present there is no appropriate method for calculation of stress on external ring of a one-way clutch. In this paper, according to characteristics of the external ring, the method of finite element analyais has been used, the factors which have influence on computational accuracy have been studied, and the stress on external ring of a five roller-type one-way clutch has been calculated. Studies have shown that finite element analyais is really an attractive method for the calculation of stress on parts similar to external ring.
Keywords
Figures
图1
图2
图3
图4
References
[ 1 ] HulsTA .Designpractice passenger[J].AutomoticTransmission, SAE , 1973, 6 (5) :79～80
[ 2 ] 罗一新, 王时任, 陈继平.六滚柱式定向离合器套环拉伸应力计算新方法[J].力学与实践, 1989, 11 (5) :54～55 link1
[ 3 ] 张学军, 王彬森, 柳瑞清.扁挤压筒装配压力的一种计算法[J].塑性工程学报, 2000, 7 (3) :10～12 link1
[ 4 ] 徐致让, 薛家国.四辊轧机辊系变形分析的有限元方法[J].力学与实践, 2000, 22 (5) :22～24 link1
[ 5 ] 戚 刚, 吴昌华, 张南林.发动机连杆精细有限元分析模型和算法的研究[J].中国机械工程, 2001, 12 (3) :282～284 link1
[ 6 ] 赵 冬, 冯仲齐, 梅占磬.框支剪力墙结构在地震力作用下弹塑性分析的有限元方法[J].应用力学学报, 2001, 18 (1) :149～154 link1
[ 7 ] 冯仲齐, 梅占磬.有旋转自由度的高精度三角形单元[J].计算力学学报, 1998, 15 (3) :293～294 link1
京公网安备 11010502051620号
