2005, Volume 7, Issue 6
Strategic Study of CAE >> 2005, Volume 7, Issue 6
The Theoretic Evaluation and Verification for the Necking Force of the Cone-shaped Concave Die
1. Zhuzhou Institute of Technology , Zhuzhou , Hunan 412008 , China
2. Xiangtan University , Xiangtan , Hunan 411005 , China
Next Previous
Abstract
Necking force is the main failure factor to the unstabitily of the thin-wall cylindrical parts. In order to improve the calculation precision of the necking force , Сторожев and Унксов separately put forward two different calculation methods about the necking force of the thin-wall cylindrical parts which take into consideation the thickness changing, the hardening effect and the friction function. In this paper, the results of the two calculation methods are analyzed by example,and are compared with experimented data. The results of two calculation methods are close to each other, and tally with experimented data.
Keywords
Figures
图1
图2
References
[ 1 ] 胡成武, 邹安全, 姚齐水.基于轴对称屈曲失稳的缩口力与临界缩口尺寸[J].锻压技术, 2003, 28 (3) :14～17 link1
[ 2 ] 胡成武.基于最小缩口力条件下的缩口凹模倾角[J].锻压技术, 2004, 29 (2) :64～66 link1
[ 3 ] KobayashiS .Approximatesolutionforperformdesigninshellnosing[J].IntJMachToolDes, 1983, (23) :111～122
[ 4 ] (苏) 斯德洛日夫МВ, 波波夫ЕА.金属塑性加工原理[M].吉林工业大学锻压教研室译, 北京:机械工业出版社, 1980
[ 5 ] (苏) 翁克索夫ЕП, (英) 约翰逊W , (日) 工藤英明.金属塑性变形理论[M ].王仲仁, 汪 涛, 贺毓辛译, 北京:机械工业出版社, 1992 link1
[ 6 ] 余载强, 吴树迎, 牛风祥.锥形凹模缩口应力场分析与缩口力计算[J].锻压技术, 1998, 23 (2) :15～19 link1
京公网安备 11010502051620号
