资源类型

期刊论文 999

年份

2024 3

2023 90

2022 97

2021 85

2020 62

2019 67

2018 53

2017 51

2016 33

2015 46

2014 42

2013 26

2012 20

2011 34

2010 38

2009 45

2008 36

2007 46

2006 13

2005 13

展开 ︾

关键词

高速铁路 14

高质量发展 8

创新 5

关键技术 4

技术体系 4

三峡工程 3

京沪高速铁路 3

发展 3

混凝土 3

高压 3

中国高速铁路 2

产业发展 2

仿真 2

冲击波 2

勘探开发 2

增材制造 2

指标体系 2

析出强化 2

混凝土面板堆石坝 2

展开 ︾

检索范围：

排序： 展示方式：

Performance assessment of Alccofine with silica fume, fly ash and slag for development of high strengthmortar

Shivang D. JAYSWAL; Mahesh MUNGULE

《结构与土木工程前沿（英文）》 2022年 第16卷 第5期   页码 576-588 doi: 10.1007/s11709-022-0826-0

摘要： Previous studies on concrete have identified silica fume (SF) as the most effective supplementary material, whereas fly ash (FA) and slag have been identified as economical materials with long term strength potential. Development of blended cement mortar referred to as blended mortar (BM) requires similar assessment. The present study explores the application of Alccofine (AL) as supplementary material and compares its performance with conventional materials namely SF, FA and ground granulated blast furnace slag (GGBS). The mortar specimens with binder to fine-aggregates (b/f ) ratio of 1:2 are prepared at water to binder (w/b) ratios of 0.4 and 0.35. The strength values and stress-strain curve for control and BM specimens are obtained at 7, 28, 56, and 90 d curing periods. The assessment based on strength activity index, k-value method and strength estimation model confirms that AL, despite lower pozzolanic activity, contributes to strength gain, due to reduced dilution effect. Assessment of stress-strain curves suggests that the effect of w/b ratio is more dominant on the elastic modulus of BM specimens than on control specimens. The observations from the study identify enhanced strength gain, improved elastic modulus and higher energy absorption as key contributions of AL making it a potential supplementary material.

关键词： Alccofine     high strength mortar     efficiency factor     dilution effect    

HTML PDF 收藏

The ITZ microstructure, thickness, porosity and its relation with compressive and flexural strength ofcement mortar; influence of cement fineness and water/cement ratio

《结构与土木工程前沿（英文）》 2022年 第16卷 第2期   页码 191-201 doi: 10.1007/s11709-021-0792-y

摘要： A new insight into the interfacial transition zone (ITZ) in cement mortar specimens (CMSs) that is influenced by cement fineness is reported. The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive (Fc) and flexural strength (Ff), and porosity at various water/cement ratios. The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure. By increasing cement fineness by about 25% of, the ITZ thickness of CMSs was reduced by about 30% and Fc was increased by 7%–52% and Ff by 19%–40%. These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.

关键词： cement fineness     interfacial transition zone     compressive and flexural strength    

HTML PDF 收藏

水泥砂浆立方体抗压强度尺寸效应的试验研究

苏捷,方志

《中国工程科学》 2014年 第16卷 第2期   页码 88-92

摘要：

通过36 组强度等级分别为M30、M50 和M80 且边长分别为70 mm、100 mm、150 mm和200 mm的水泥砂浆立方体试件的抗压试验，研究了不同强度等级水泥砂浆试件抗压强度的尺寸效应，建立了强度等级与抗压强度尺寸效应的关系，提出了水泥砂浆抗压强度尺寸效应率的计算公式，通过试验数据验证了该公式的适用性。

关键词： 水泥砂浆     尺寸效应     强度等级     立方体抗压强度    

HTML PDF 收藏

Cement mortar with enhanced flexural strength and durability-related properties using

Qing LIU, Renjun LIU, Qiao WANG, Rui LIANG, Zongjin LI, Guoxing SUN

《结构与土木工程前沿（英文）》 2021年 第15卷 第1期   页码 99-108 doi: 10.1007/s11709-021-0721-0

摘要： The low flexural strength and high brittleness of cementitious materials impair their service life in building structures. In this study, we developed a new polymer-modified mortar by polymerization of acrylamide (AM) monomers during the cement setting, which enhanced the flexural and durable performances of mortars. The mechanical properties, micro-and-pore structures, hydrated products, interactions between cement hydrates and polyacrylamide (PAM), and durability-related properties of the mortars were investigated comprehensively. Mortars with 5% PAM exhibited the best performance in terms of flexural strength among all the mixtures. The mechanical strength of cement pastes modified by polymerization of AM monomers was significantly superior to those modified by PAM. The chemical interactions between the polymer molecules and cement hydrates together with the formation of polymer films glued the cement hydrates and polymers and resulted in an interpenetrating network structure, which strengthened the flexural strength. Reductions in porosity and calcium hydroxide content and improvement in capillary water absorption were achieved with the addition of PAM. Finally, the chloride resistance was significantly enhanced with the incorporation of PAM.

关键词： acrylamide     in situ polymerization     interaction     porosity     durability    

HTML PDF 收藏

Effect of embedment length of untreated natural fibres on the bond behaviour in cement mortar

Gudimella RAMAKRISHNA, Sriraman PRIYADHARSHINI

《结构与土木工程前沿（英文）》 2018年 第12卷 第4期   页码 454-460 doi: 10.1007/s11709-017-0454-2

摘要： The present investigation is focused on studying the effects of various matrices with 1:3, 1:4 and 1:5 mortars and fibre types of sisal and coir on the bond behavior at various ages of curing, i.e., 24 h, 3 d, 7 d and 28 d. The other parameters included in the investigation are water/cement (w/c) ratio, sand gradation and embedment length of fibres. In addition, the type of failure of sisal and coir fibres for different mixes of mortars at various curing ages is also reported. From the results, it is seen that the bond strength is improving with respect to age of curing in case of sisal fibres, but decreases in case of coir fibres. The failure of fibres due to fibre fracture is observed in sisal fibres and fibre pullout is observed in coir fibres. The other varying parameters such as mortar mixes, sand gradation, w/c ratio and embedded length also showed significant effect on bond behaviour of sisal and coir fibre with the cement mortar mixes.

关键词： bond strength     cement mortar     natural fibre     pullout test     type of failure    

HTML PDF 收藏

Slender reinforced concrete shear walls with high-strength concrete boundary elements

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 138-151 doi: 10.1007/s11709-022-0897-y

摘要： Reinforced concrete structural walls are commonly used for resisting lateral forces in buildings. Owing to the advancements in the field of concrete materials over the past few decades, concrete mixes of high compressive strength, commonly referred to as high-strength concrete (HSC), have been developed. In this study, the effects of strategic placement of HSC on the performance of slender walls were examined. The finite-element model of a conventional normal-strength concrete (NSC) prototype wall was validated using test data available in extant studies. HSC was incorporated in the boundary elements of the wall to compare its performance with that of the conventional wall at different axial loads. Potential reductions in the reinforcement area and size of the boundary elements were investigated. The HSC wall exhibited improved strength and stiffness, and thereby, allowed reduction in the longitudinal reinforcement area and size of the boundary elements for the same strength of the conventional wall. Cold joints resulting from dissimilar concrete pours in the web and boundary elements of the HSC wall were modeled and their impact on behavior of the wall was examined.

关键词： slender walls     high-strength concrete     rectangular and barbell-shaped walls     cold joints    

HTML PDF 收藏

Silicon carbide waste as a source of mixture materials for cement mortar

Zhengwu Jiang, Qiang Ren, Haoxin Li, Qing Chen

《环境科学与工程前沿（英文）》 2017年 第11卷 第5期 doi: 10.1007/s11783-017-0974-y

摘要： This paper presents an investigation of the feasibility of recycling silicon carbide waste (SCW) as a source of mixture materials in the production of cement mortar. Mortars with SCW were prepared by replacing different amounts of cement with SCW, and the properties of the resulting mortars, such as the fluidity, strength and shrinkage, were studied in this work. Thermogravimetry-differential scanning calorimetry and scanning electron microscopy were employed to understand the reasons for the property changes of the mortars. The results indicate that SCW decreases the initial and 1-h fluidity of fresh mortar but improves the loss of fluidity. The mortar with SCW exhibits a lower strength at 3 d and 7 d but a higher strength at 28 d and 56 d compared to the control. The shrinkage rate of cement mortar with SCW shows an obvious decrease as the replacement ratio increases. In addition, the content of calcium hydroxide in hardened paste also shows that SCW has some impact on the hydration of the cement-SCW system. The microstructures of the hardened paste also show evidence for a later strength change of mortar containing SCW. This work provides a strategic reference for possibly applying SCW as a mixture material in the production of cement mortar.

关键词： Silicon carbide waste     Cement mortar     Fluidity     Strength     Shrinkage    

HTML PDF 收藏

Data driven models for compressive strength prediction of concrete at high temperatures

Mahmood AKBARI, Vahid JAFARI DELIGANI

《结构与土木工程前沿（英文）》 2020年 第14卷 第2期   页码 311-321 doi: 10.1007/s11709-019-0593-8

摘要： The use of data driven models has been shown to be useful for simulating complex engineering processes, when the only information available consists of the data of the process. In this study, four data-driven models, namely multiple linear regression, artificial neural network, adaptive neural fuzzy inference system, and nearest neighbor models based on collection of 207 laboratory tests, are investigated for compressive strength prediction of concrete at high temperature. In addition for each model, two different sets of input variables are examined: a complete set and a parsimonious set of involved variables. The results obtained are compared with each other and also to the equations of NIST Technical Note standard and demonstrate the suitability of using the data driven models to predict the compressive strength at high temperature. In addition, the results show employing the parsimonious set of input variables is sufficient for the data driven models to make satisfactory results.

关键词： data driven model     compressive strength     concrete     high temperature    

HTML PDF 收藏

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Qing JIANG, Hanqin WANG, Xun CHONG, Yulong FENG, Xianguo YE

《结构与土木工程前沿（英文）》 2021年 第15卷 第1期   页码 227-243 doi: 10.1007/s11709-020-0687-3

摘要： To study the flexural behavior of prestressed concrete beams with high-strength steel reinforcement and high-strength concrete and improve the crack width calculation method for flexural components with such reinforcement and concrete, 12 specimens were tested under static loading. The failure modes, flexural strength, ductility, and crack width of the specimens were analyzed. The results show that the failure mode of the test beams was similar to that of the beams with normal reinforced concrete. A brittle failure did not occur in the specimens. To further understand the working mechanism, the results of other experimental studies were collected and discussed. The results show that the normalized reinforcement ratio has a greater effect on the ductility than the concrete strength. The cracking- and peak-moment formulas in the code for the design of concrete (GB 50010-2010) applied to the beams were both found to be acceptable. However, the calculation results of the maximum crack width following GB 50010-2010 and EN 1992-1-1:2004 were considerably conservative. In the context of GB 50010-2010, a revised formula for the crack width is proposed with modifications to two major factors: the average crack spacing and an amplification coefficient of the maximum crack width to the average spacing. The mean value of the ratio of the maximum crack width among the 12 test results and the relative calculation results from the revised formula is 1.017, which is better than the calculation result from GB 50010-2010. Therefore, the new formula calculates the crack width more accurately in high-strength concrete and high-strength steel reinforcement members. Finally, finite element models were established using ADINA software and validated based on the test results. This study provides an important reference for the development of high-strength concrete and high-strength steel reinforcement structures.

关键词： high-strength steel reinforcement     high-strength concrete     flexural behavior     crack width    

HTML PDF 收藏

A numerical study of prestressed high strength steel tubular members

Michaela GKANTOU, Marios THEOFANOUS, Charalampos BANIOTOPOULOS

《结构与土木工程前沿（英文）》 2020年 第14卷 第1期   页码 10-22 doi: 10.1007/s11709-019-0547-1

摘要： The structural behavior of prestressed high strength steel (HSS) tubular members is investigated through the execution of advanced finite element modeling. Numerical models are developed and validated against published experimental data on HSS tubular members subjected to different levels of initial prestress and loaded either in tension or compression. The effect of the presence or absence of grouting on the strength and ductility of the members is also considered. To numerically replicate the structural response recorded in the tests, some key modeling features including the employed numerical solver, the adopted material models and the element types warrant careful consideration. Upon developing of the finite element models, the numerically generated ultimate loads, the corresponding failure modes and the full load-deformation curves are compared to the experimental ones, indicating a successful validation. As anticipated, prestressing enhances the load-bearing capacity for the tensile members, whereas it is detrimental for the compressive ones. A series of parametric studies is performed to assess the influence of key factors on the structural response of prestressed HSS members and the obtained results are discussed. Design guidance for tensile and compressive prestressed tubular members is also provided.

关键词： finite element     prestressing     tubular members     grout     high strength steel    

HTML PDF 收藏

Calculation methods of the crack width and deformation for concrete beams with high-strength steel bars

Jianmin ZHOU, Shuo CHEN, Yang CHEN

《结构与土木工程前沿（英文）》 2013年 第7卷 第3期   页码 316-324 doi: 10.1007/s11709-013-0211-0

摘要： Three groups of concrete beams reinforced with high-strength steel bars were tested, and the crack width and deformation of the specimens were observed and studied. To facilitate the predictions, two simplified formulations according to a theory developed by the first author were proposed. The advantages of the formulations were verified by the test data and compared with several formulas in different codes.

关键词： concrete beam     high-strength steel bar     crack width     deformation    

HTML PDF 收藏

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

《结构与土木工程前沿（英文）》 2014年 第8卷 第1期   页码 46-56 doi: 10.1007/s11709-014-0237-y

摘要： In recent years, an emerging technology termed high-strength concrete (HSC) has become popular in construction industry. Present study describes an experimental research on the behavior of high-strength concrete beams in ultimate and service state. Six simply supported beams were tested, by applying comprising two symmetric concentrated loads. Tests are reported in this study on the flexural behavior of high-strength reinforced concrete (HSRC) beams made with coarse and fine aggregate together with Microsilica. Test parameter considered includes effect of being compressive reinforcement. Based on the obtained results, the behavior of such members is more deeply reviewed. Also a comparison between theoretical and experimental results is reported here. The beams were made from concrete having compressive strength of 66.81–77.72 N/mm and percentage reinforcement ratio ( / ) in the range of 0.56% – 1.20%. The ultimate moment for the tested beams was found to be in a good agreement with that of the predicted ultimate moment based on ACI 318-11, ACI 363 and CSA-04 provisions. The predicted deflection based classical formulation based on code provisions for serviceability requirements is found to underestimate the maximum deflection of HSC reinforced beams at service load.

关键词： high-strength concrete (HSC) members     flexural behavior     reinforced concrete     experimental results     ultimate moment    

HTML PDF 收藏

State-of-the-art on resistance of bearing-type bolted connections in high strength steel

Guoqiang LI, Yifan LYU, Yanbo WANG

《结构与土木工程前沿（英文）》 2020年 第14卷 第3期   页码 569-585 doi: 10.1007/s11709-020-0607-6

摘要： With the recent development of material science, high strength steel (HSS) has become a practical solution for landmark buildings and major projects. The current codes for design of bearing-type bolted connections of steel constructions were established based on the research of conventional steels. Since the mechanical properties of HSS are different from those of conventional steels, more works should be done to develop the appropriate approach for the design of bearing-type bolted connections in HSS. A review of the research carried out on bearing-type bolted connections fabricated from conventional steel and HSS is presented. The up-to-date tests conducted at Tongji University on four connection types fabricated from three grades of HSS with nominal yield strengths of 550, 690, and 890 MPa are presented. The previous research on failure modes, bearing resistance and the design with consideration of bolt hole elongation are summarized. It is found that the behavior of bolted connections in HSS have no drastic difference compared to that of conventional steel connections. Although the ductility is reduced, plastic deformation capacity of HSS is sufficient to ensure the load redistribution between different bolts with normal construction tolerances. It is also found that behavior of each bolt of multi-bolt connections arranged in perpendicular to load direction is almost identical to that of a single-bolt connection with the same end distance. For connections with bolts arranged in parallel to load direction, the deformation capacity of the whole connection depends on the minimum value between the end distance and the spacing distances in load direction. The comparison with existing design codes shows that Eurocode3 and Chinese GB50017-2017 are conservative for the design of bolted connections in HSS while AISC 360-16 may overestimate the bearing resistance of bolted connections.

关键词： High strength steel     bolted connection     bearing behavior     design codes    

HTML PDF 收藏

Behavior and strength of headed stud shear connectors in ultra-high performance concrete of composite

Jianan QI, Yuqing HU, Jingquan WANG, Wenchao LI

《结构与土木工程前沿（英文）》 2019年 第13卷 第5期   页码 1138-1149 doi: 10.1007/s11709-019-0542-6

摘要： This study presents an experimental and numerical investigation on the static behavior of headed stud shear connectors in ultra-high performance concrete (UHPC) of composite bridges. Four push-out specimens were tested. It was found that no cracking, crushing or splitting was observed on the concrete slab, indicating that UHPC slab exhibited good performance and could resist the high force transferred from the headed studs. The numerical and experimental results indicated that the shear capacity is supposed to be composed of two parts stud shank shear contribution and concrete wedge block shear contribution. The stiffness increment of a stud in UHPC was at least 60% higher than that in normal strength concrete. Even if the stud height was reduced from 6 to 2 , there was no reduction in the shear strength of a stud. Short stud shear connectors with an aspect ratio as small as 2 could develop full strength in UHPC slabs. An empirical load-slip equation taking into account stud diameter was proposed to predict the load-slip response of a stud. The reliability and accuracy of the proposed load-slip equation was verified by the experimental and numerical load-slip curves.

关键词： ultra-high performance concrete     studs     shear strength     FE analysis     push-out test    

HTML PDF 收藏

Behavior of steel fiber–reinforced high-strength concrete at medium strain rate

Chujie JIAO, Wei SUN, Shi HUAN, Guoping JIANG

《结构与土木工程前沿（英文）》 2009年 第3卷 第2期   页码 131-136 doi: 10.1007/s11709-009-0027-0

摘要： Impact compression experiments for the steel fiber–reinforced high-strength concrete (SFRHSC) at medium strain rate were conducted using the split Hopkinson press bar (SHPB) testing method. The volume fractions of steel fibers of SFRHSC were between 0 and 3%. The experimental results showed that, when the strain rate increased from threshold value to 90 s , the maximum stress of SFRHSC increased about 30%, the elastic modulus of SFRHSC increased about 50%, and the increase in the peak strain of SFRHSC was 2-3 times of that in the matrix specimen. The strength and toughness of the matrix were improved remarkably because of the superposition effect of the aggregate high-strength matrix and steel fiber high-strength matrix. As a result, under impact loading, cracks developed in the SFRHSC specimen, but the overall shape of the specimen remained virtually unchanged. However, under similar impact loading, the matrix specimens were almost broken into small pieces.

关键词： steel fiber–reinforced high-strength concrete (SFRHSC)     high strain rates     split Hopkinson press bar (SHPB)     strain rate hardening effects    

HTML PDF 收藏

标题 作者 时间 类型 操作

Performance assessment of Alccofine with silica fume, fly ash and slag for development of high strengthmortar

Shivang D. JAYSWAL; Mahesh MUNGULE

期刊论文

The ITZ microstructure, thickness, porosity and its relation with compressive and flexural strength ofcement mortar; influence of cement fineness and water/cement ratio

期刊论文

水泥砂浆立方体抗压强度尺寸效应的试验研究

苏捷,方志

期刊论文

Cement mortar with enhanced flexural strength and durability-related properties using

Qing LIU, Renjun LIU, Qiao WANG, Rui LIANG, Zongjin LI, Guoxing SUN

期刊论文

Effect of embedment length of untreated natural fibres on the bond behaviour in cement mortar

Gudimella RAMAKRISHNA, Sriraman PRIYADHARSHINI

期刊论文

Slender reinforced concrete shear walls with high-strength concrete boundary elements

期刊论文

Silicon carbide waste as a source of mixture materials for cement mortar

Zhengwu Jiang, Qiang Ren, Haoxin Li, Qing Chen

期刊论文

Data driven models for compressive strength prediction of concrete at high temperatures

Mahmood AKBARI, Vahid JAFARI DELIGANI

期刊论文

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Qing JIANG, Hanqin WANG, Xun CHONG, Yulong FENG, Xianguo YE

期刊论文

A numerical study of prestressed high strength steel tubular members

Michaela GKANTOU, Marios THEOFANOUS, Charalampos BANIOTOPOULOS

期刊论文

Calculation methods of the crack width and deformation for concrete beams with high-strength steel bars

Jianmin ZHOU, Shuo CHEN, Yang CHEN

期刊论文

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

期刊论文

State-of-the-art on resistance of bearing-type bolted connections in high strength steel

Guoqiang LI, Yifan LYU, Yanbo WANG

期刊论文

Behavior and strength of headed stud shear connectors in ultra-high performance concrete of composite

Jianan QI, Yuqing HU, Jingquan WANG, Wenchao LI

期刊论文

Behavior of steel fiber–reinforced high-strength concrete at medium strain rate

Chujie JIAO, Wei SUN, Shi HUAN, Guoping JIANG

期刊论文