[ 1 ] Cai QW, Ju XJ, Zhang SY, Chen ZH, Hu JQ, Zhang LP, et al. Controllable fabrication of functional microhelices with droplet microfluidics. ACS Appl Mater Interfaces 2019;11(49):46241–50. link1

[ 2 ] Geng Y, Ling SD, Huang J, Xu J. Multiphase microfluidics: fundamentals, fabrication, and functions. Small 2020;16(6):1906357. link1

[ 3 ] Stroock AD, Dertinger SK, Ajdari A, Mezic´ I, Stone HA, Whitesides GM. Chaotic mixer for microchannels. Science 2002;295(5555):647–51. link1

[ 4 ] Burns MA, Johnson BN, Brahmasandra SN, Handique K, Webster JR, Krishnan M, et al. An integrated nanoliter DNA analysis device. Science 1998;282 (5388):484–7. link1

[ 5 ] Simonnet C, Groisman A. Two-dimensional hydrodynamic focusing in a simple microfluidic device. Appl Phys Lett 2005;87(11):114104. link1

[ 6 ] Losey MW, Schmidt MA, Jensen KF. Microfabricated multiphase packed-bed reactors: characterization of mass transfer and reactions. Ind Eng Chem Res 2001;40(12):2555–62. link1

[ 7 ] Wang FJ, Huang JP, Xu JH. Continuous-flow synthesis of the azo pigment yellow 14 using a three-stream micromixing process. Org Process Res Dev 2019;23(12):2637–46. link1

[ 8 ] Chen D, Zhao CX, Lagoin C, Hai M, Arriaga LR, Koehler S, et al. Dispersing hydrophobic natural colourant b-carotene in shellac particles for enhanced stability and tunable colour. R Soc Open Sci 2017;4(12):170919. link1

[ 9 ] You JB, Kang K, Tran TT, Park H, Hwang WR, Kim JM, et al. PDMS-based turbulent microfluidic mixer. Lab Chip 2015;15(7):1727–35. link1

[10] Lim CY, Lam YC, Yang C. Mixing enhancement in microfluidic channel with a constriction under periodic electro-osmotic flow. Biomicrofluidics 2010;4 (1):014101. link1

[11] Lu LH, Ryu KS, Liu C. A magnetic microstirrer and array for microfluidic mixing. J Microelectromech Syst 2002;11(5):462–9. link1

[12] Williams MS, Longmuir KJ, Yager P. A practical guide to the staggered herringbone mixer. Lab Chip 2008;8(7):1121–9. link1

[13] Lin Y, Yu X, Wang Z, Tu ST, Wang Z. Design and evaluation of an easily fabricated micromixer with three-dimensional periodic perturbation. Chem Eng J 2011;171(1):291–300. link1

[14] Amini H, Sollier E, Weaver WM, Di Carlo D. Intrinsic particle-induced lateral transport in microchannels. Proc Natl Acad Sci USA 2012;109(29):11593–8. link1

[15] Lee MG, Choi S, Park JK. Three-dimensional hydrodynamic focusing with a single sheath flow in a single-layer microfluidic device. Lab Chip 2009;9 (21):3155–60. link1

[16] Eluru G, Julius LAN, Gorthi SS. Single-layer microfluidic device to realize hydrodynamic 3D flow focusing. Lab Chip 2016;16(21):4133–41. link1

[17] Golden JP, Justin GA, Nasir M, Ligler FS. Hydrodynamic focusing—a versatile tool. Anal Bioanal Chem 2012;402(1):325–35. link1

[18] Hou K, Li Y, Liu Y, Zhang R, Hsiao BS, Zhu M. Continuous fabrication of cellulose nanocrystal/poly(ethylene glycol) diacrylate hydrogel fiber from nanocomposite dispersion: rheology, preparation and characterization. Polymer 2017;123:55–64. link1

[19] Paulsen KS, Di Carlo D, Chung AJ. Optofluidic fabrication for 3D-shaped particles. Nat Commun 2015;6:6976. link1

[20] Zhao X, Bian F, Sun L, Cai L, Li L, Zhao Y. Microfluidic generation of nanomaterials for biomedical applications. Small 2020;16(9):1901943. link1

[21] Song S, Choi S. Inertial modulation of hydrophoretic cell sorting and focusing. Appl Phys Lett 2014;104(7):074106. link1

[22] Gao R, Cheng L, Wang S, Bi X, Wang X, Wang R, et al. Efficient separation of tumor cells from untreated whole blood using a novel multistage hydrodynamic focusing microfluidics. Talanta 2020;207:120261. link1

[23] Nunes JK, Wu CY, Amini H, Owsley K, Di Carlo D, Stone HA. Fabricating shaped microfibers with inertial microfluidics. Adv Mater 2014;26(22):3712–7. link1

[24] Amini H, Sollier E, Masaeli M, Xie Yu, Ganapathysubramanian B, Stone HA, et al. Engineering fluid flow using sequenced microstructures. Nat Commun 2013;4:1826. link1

[25] Stoecklein D, Davies M, de Rutte JM, Wu CY, Di Carlo D, Ganapathysubramanian B. FlowSculpt: software for efficient design of inertial flow sculpting devices. Lab Chip 2019;19(19):3277–91. link1

[26] Wu CY, Owsley K, Di Carlo D. Rapid software-based design and optical transient liquid molding of microparticles. Adv Mater 2015;27(48):7970–8. link1

[27] Wu CY, Stoecklein D, Kommajosula A, Lin J, Owsley K, Ganapathysubramanian B, et al. Shaped 3D microcarriers for adherent cell culture and analysis. Microsyst Nanoeng 2018;4(1):21. link1

[28] Stoecklein D, Di Carlo D. Nonlinear microfluidics. Anal Chem 2019;91 (1):296–314. link1

[29] Boyd DA, Shields AR, Howell PB Jr, Ligler FS. Design and fabrication of uniquely shaped thiol-ene microfibers using a two-stage hydrodynamic focusing design. Lab Chip 2013;13(15):3105–10. link1

[30] Stoecklein D, Davies M, Wubshet N, Le J, Ganapathysubramanian B. Automated design for microfluid flow sculpting: multiresolution approaches, efficient encoding, and CUDA implementation. J Fluids Eng 2017;139(3):031402. link1

[31] Daniele MA, Boyd DA, Adams AA, Ligler FS. Microfluidic strategies for design and assembly of microfibers and nanofibers with tissue engineering and regenerative medicine applications. Adv Healthc Mater 2015;4(1):11–28. link1

[32] Qi H, Liang A, Jiang H, Chong X, Wang Y. Effect of pipe surface wettability on flow slip property. Ind Eng Chem Res 2018;57(37):12543–50. link1