Search | Engineering

订阅投稿

首页工程期刊工程焦点工程成就工程前沿关于我们 English

资源类型

期刊论文 3

年份

2012 1

2011 1

2010 1

关键词

检索范围：

排序：展示方式：

Development of oxide dispersion strengthened ferritic steels with and without aluminum

Jae Hoon LEE

《能源前沿（英文）》 2012年第6卷第1期页码 29-34 doi: 10.1007/s11708-012-0178-x

摘要： Pure Fe, Cr, Al, Ti elemental powders and pre-alloyed Y O powder were processed by high energy mechanical milling. The compositions of the mixed powders are designed as Fe-18Cr-0.2Ti-0.35Y O and Fe-18Cr-5Al-0.2Ti-0.35Y O in weight percent. The as-milled powders were consolidated by hot extrusion at 1423 K. The dispersed oxide particles were identified to be titania+ yttria for Al-free oxide dispersion strengthened (ODS) steel and alumina+ yttria for Al-added ODS steel, respectively. The ultimate tensile strength of Al-free ODS steel was higher than that of Al-added ODS steel over the temperature range of 298–973 K, because of the difference in number density and size of thermally stable oxide particles dispersed in both steel matrices. The strength in the longitudinal direction was lower than that in the transverse direction, probably due to anisotropy of the microstructure with elongated grains in the hot-extrusion direction for the 18%Cr-ODS steels with and without 5%Al.

关键词： oxide dispersion strengthened (ODS) steel milling extrusion aluminum yttria

HTML PDF 收藏

Brazing of ceramic-to-ceramic and ceramic-to-metal joints in air

Kirsten BOBZIN, Thomas SCHLAEFER, Lidong ZHAO, Nils KOPP, Arne SCHLEGEL

《机械工程前沿（英文）》 2010年第5卷第2期页码 125-129 doi: 10.1007/s11465-010-0007-z

摘要： Reactive air brazing (RAB) is an emerging technology for the production of ceramic-to-ceramic and ceramic-to-metal joints. In this study, RAB was investigated with respect to the potential applications for solid oxide fuel cells (SOFCs) as one example of use. It was found that alumina could be well brazed by RAB with AgCu and AgCuTi brazes. Both braze composition and brazing temperature influenced significantly the wetting behavior and their mechanism of wetting. AgCu and AgCuTi braze alloys could also be used to produce brazed joints with the SOFC materials ceramic yttria stabilized zirconia and steel X1CrTiLa22. However, CuO reacts with the steel, forming a brittle oxide layer on the steel surface, which is undesirable for SOFC applications. The first trials with Ag0.5Al showed a promising solution.

关键词： reactive air brazing (RAB) X1CrTiLa22 Al₂O₃ yttria stabilized zirconia (YSZ) solid oxide fuel cell (SOFC)

HTML PDF 收藏

Preparation and characterization of nanocrystalline ZrO2-7%Y2O3 powders for thermal barrier coatings by high-energy ball milling

Kirsten BOBZIN, Lidong ZHAO, Thomas SCHLAEFER, Thomas WARDA

《机械工程前沿（英文）》 2011年第6卷第2期页码 176-181 doi: 10.1007/s11465-011-0220-4

摘要：

High-energy ball milling is an effective method to produce nanocrystalline oxides. In this study, a conventional ZrO₂-7%Y₂O₃spray powder was ball-milled to produce nanocrystalline powders with high levels of crystalline disorders for deposition of thermal barrier coatings. The powder was milled both with 100Cr6 steel balls and with ZrO₂-3%Y₂O₃ ceramic balls as grinding media. The milling time was varied in order to investigate the effect of the milling time on the crystallite size. The powders were investigated in terms of their crystallite sizes and morphologies by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that under given milling conditions the powder was already nanostructured after 40 min milling. The crystallite size decreased significantly with increasing milling time within first 120 min. After that, a further increase of milling time did not lead to a significant reduction of the crystallite size. Ball-milling led to lattice microstrains. Milling with the steel balls resulted in finer nano-sized crystal grains, but caused the contamination of the powder. The nano-sized crystal grains coarsened during the heat-treatment at 1250°C.

关键词： nanostrucured powders yttria stabilized zirconia (YSZ) high-energy ball milling thermal barrier coatings