《1.Introduction》

1.Introduction

In recent decades, important advances have been reached in biomaterial-based development for tissue engineering, in the form of substitutes that are able to restore, maintain, or improve organ function [1]. The increase in life expectancy requires scientific efforts to focus on the natural bone-healing process and associated complications. Due to their unlimited supply, engineered bone tissues represent a potential alternative to the conventional use of bone grafts; in addition, they carry no risk of disease transmission [2,3]. Efforts in bone tissue engineering mainly focus on inducing functional bone regeneration via combined cell therapy and biomaterials, which include ceramics as well as nondegradable and biodegradable polymers with different mechanical properties, degradation rates, and chemical functionalities [4– 9]. Synthetic hydroxyapatite (HA) ceramics are widely used for human implant coatings because of their high biocompatibility and osteoconductivity [10–12]. HA is a key mineral component in bone and tooth tissue, and has multiple ionic substitutions in the  lattice, including, F-, Mg2+, and Na+. These substitutions not only change the space group, morphology, stability, and mechanical properties of the HA structure, but are also important for the biological responses of bone cells. For example, carbonates () promote the growth of apatite crystals, while magnesium (Mg) enhances bone metabolism by stimulating osteoblast proliferation at an early stage of osteogenesis, as is demonstrated by the observation that Mg depletion leads to bone fragility and bone loss [13]. Apatite and calcium-phosphate implant materials with low levels of Mg (i.e., MgHA), as well as biomimetic materials with co-substitution of Mg and B-type carbonate (i.e., substitution of phosphate), enhance the bioactivity of the HA structure [14]. Nanoscale control over the scaffold architecture of these nano-sized biomaterials allows a greater understanding of cell-type-specific sensitivity to topographical features, thus enabling the inclusion of proteins and growth factors, even when not clinically possible, and leading to complex multi-tissue regeneration [15].

The stem cell homing approach, which involves the recruitment of mesenchymal stem cells (MSCs) to injured tissues, is gaining interest among the different scaffold-based tissue engineering strategies because it is robust for bone regeneration in vivo. Homing factors such as chemokines, selectins, and integrins that are covalently bound or absorbed into the ceramic or polymeric scaffold can, in fact, allow MSCs to participate as osteoprogenitor cells in the bones’ regenerative process [16–18]. Fibronectin (FN) (type I, II, or III) is a major glycoprotein in the extracellular matrix (ECM) and a member of the integrin family of cell surface molecules, which are involved in various cellular events such as cell adhesion, growth, migration, and the differentiation of osteoblasts. FN type III has a central cell-binding domain (CCBD) containing the Arg-Gly-Asp (RGD) motif. This particular domain confers cell adhesion [19]. Specific peptide sequences containing the RGD motif are often used to enhance integrin-mediated cell adhesion.

In this publication, we report our preliminary results on the coating of MgHA disks with two chemotactic/haptotactic factors: either the fibronectin fragment III1 -C human (FF III1 -C), or the peptide sequence Gly-Arg-Gly-Asp-Ser-Pro-Lys, an FN analog that is able to bind to integrin transmembrane receptors. The covalent anchoring of these factors by means of the bifunctional spacer (3-aminopropyl)triethoxysilane (APTES) prevents their metabolism and migration from the implant site, and allows strict control over the spatial orientation of the biomolecules. In order to explore whether the incorporation of these mimetic peptide sequences onto MgHA regulates the homing of MSCs, thereby inducing cell migration to a specific site, we performed a preliminary in vitro study.

《2.Materials and methods》

2.Materials and methods

Commercial solvents and reagents were used without further purification. The FF III1-C and the Gly-Arg-Gly-Asp-Ser-Pro-Lys peptide sequence were obtained from Sigma-Aldrich. MgHA was synthesized following a previously reported procedure [14]. The MgHA powders were shaped into disks (diameter: 8 mm; height: 3 mm; weight: 300 mg per disk) using isostatic pressure at 2.5 ×105 kPa and were stored in a vacuum desiccator at room temperature. An X-ray diffraction (XRD) analysis was performed with a Bruker D8 Advance diffractometer using nickel-filtered CuKα radiation. Diffraction peaks were compared with those in the Joint Committee on Powdered Diffraction Standards (JCPDS) database. Scanning electron microscopy (SEM) was conducted on a FEI Quanta 450 FEG instrument operating at 15 kV. Transmission electron microscopy (TEM) analyses were carried out with a JEOL JEM-2010 transmission electron microscope (LaB6 electron gun) at 200 kV. A Gatan 794 multi-scan charge-coupled device (CCD) camera was used to obtain digital images. A TA Q500 instrument was used for thermogravimetric analyses (TGAs) from 100 °C to 1000 °C, with a rate of 10 °C per minute under nitrogen. Infrared analysis on KBr-based pellets was performed in a Fourier transform infrared (FTIR) spectrometer (Perkin-Elmer 2000). Ultraviolet (UV) spectra were analyzed with a Thermo Nicolet Evolution 500 spectrophotometer. All of the MgHA functionalization syntheses in double and non-functionalized disks were used as controls.

All cell-handling procedures were performed in a sterile laminar flow hood. Cultured cells were incubated at 37 °C with 5% CO2.

《2.1. Synthesis of MgHA-APTES disks》

2.1. Synthesis of MgHA-APTES disks

The synthesis of the MgHA-APTES disks was performed by immersing the MgHA disks in a 1 mol·L–1 solution of APTES in dry hexane (50 mL) while stirring for 3 h at room temperature. Samples were washed with hexane and further dried by vacuum at 40 °C under vacuum for 24 h. The amount of APTES that was grafted onto the disks was evaluated by analyzing the concentration of the free amino groups (NH2 ) exposed on the disk surfaces (Kaiser test).

《2.2. Synthesis of MgHA-APTES-CFF disks》

2.2. Synthesis of MgHA-APTES-CFF disks

In a manner similar to the functionalization procedure described above, MgHA-APTES disks were treated with solutions of FF III1 -C (10 µmol·L–1 or 100 µmol·L–1 ) in phosphate-buffered solutions (PBSs, 50 µL or 500 µL), activated with 1-ethyl-3-(3dimethylaminopropyl) carbodiimide hydrochloride (EDC·HCl, 0.0014 µmol or  0.014 µmol) and  N-hydroxysuccinimide (NHS, 0.0014 µmol or 0.014 µmol) for 3 h at 37 °C. After functionalization, the samples of MgHA-APTES-CFF10 (chemotactic factors: fibronectin) (10 µmol·L–1 concentration of FN) and MgHA-APTESCFF100 (100 µmol·L–1 concentration of FN) were washed with PBS for 10 min and further dried by vacuum at 37 °C for 24 h. The quantity of fibronectin bound onto the MgHA-APTES surface was assessed by nuclear magnetic resonance (NMR) spectroscopy.

《2.3. Synthesis of MgHA-APTES-CFP disks》

2.3. Synthesis of MgHA-APTES-CFP disks

The MgHA-APTES disks were allowed to interact with solutions of the Gly-Arg-Gly-Asp-Ser-Pro-Lys peptide sequence (10µmol·L–1 or 100 µmol·L–1) in PBS (50 µL or 500 µL), activated with EDC·HCl (0.0138 µmol or 0.138 µmol) and NHS (0.0138 µmol or 0.138 µmol) for 3 h at 37 °C. After functionalization, the samples of MgHA-APTES-CFP10 (chemotactic factors: peptide) (10 µmol·L–1 concentration of peptide sequence) and MgHA-APTES-CFP100 (100 µmol·L–1 concentration of peptide sequence) were washed with PBS for 10 min and further dried by vacuum at 37 °C for 24 h. The quantity of peptides bound onto the MgHA-APTES surface was assessed as a difference, by measuring the presence of organic functionalities in the washing solutions using NMR spectroscopy.

《2.4 Preliminary in vitro tests》

2.4 Preliminary in vitro tests

MSCs from mice (C57BL/6 mMSC, Gibco) were cultured in Dulbecco’s Modified Eagle Medium (DMEM) (Gibco, GlutaMAX supplement), which contains 10% fetal bovine serum (FBS) and 1% penicillin-streptomycin (100 U·mL–1per 100 µg·mL–1). Cells were cultured at 37 °C with 5% CO2. Tripsinization was used to detach the cells from the culture flask. Detached cells were further centrifuged and re-suspended. The trypan blue dye exclusion test was used to analyze cell number and viability.

Each MgHA-based disk was washed three times with PBS for 10 min each. Air-dried samples were sterilized by UV for 20 min in a laminar flow hood. Individual samples were placed in separate wells in a 24-well plate. The MSCs (5 × 103) were seeded into 24-well inserts of 8 µm pore size (polyethylene terephthalate membrane, Corning) in direct contact with the disks.

We prepared 5 mg·mL–1 of the reagent 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT, Invitrogen) in 1 × PBS. After 3 days of culture, inserts were moved to a new plate and incubated in 500 µg·mL–1 MTT at 37 °C for 2 h. The medium was collected and the cells were incubated with 1 mL of dimethyl sulfoxide for 15 min. In the MTT reagent, metabolically active cells and tetrazolium salt react to produce a formazan dye. The absorbance that was measured at a λmax of 570 nm with a Multiskan FC Microplate Photometer (Thermo Scientific) is correlated with the number of metabolically active cells [20].

《3.Results and discussion》

3.Results and discussion

《3.1. Synthesis of MgHA-APTES disks》

3.1. Synthesis of MgHA-APTES disks

The strategy for the immobilization of the chemotactic/haptotactic factors for MSC homing onto the Mg-doped HA disks involved the grafting of APTES in dry hexane. Surface functionalization with APTES, which occurs through a coupling reaction between surface OH groups and silanols obtained from hydrolyzed APTES, allowed the insertion of the amino groups that were required for the immobilization of the peptides used in this study (Fig. 1).

《Fig.1》

 Fig. 1. Scheme of the synthesis of MgHA-APTES disks. RT: room temperature. 

The quantity of amino groups inserted after the silanization process was evaluated by spectrophotometric quantification after a reaction with ninhydrin (Kaiser test). The NH2 loading, which was evaluated after washing with hexane and drying the disks, was found to be 0.11 mmol·g–1. An XRD analysis was performed directly on the MgHA and MgHA-APTES disks. As shown in Fig. 2, the crystallinity of the MgHA samples was confirmed by the characteristic diffraction peaks that appeared for both samples at 26°, 30°–34°, 40°, and 46°–53° (2θ), which correspond to the (002), (211), (112), (300), (202), (310), (222), (213), and (004) reflection planes of the hydroxyapatite crystal (PDF 09-0432).

《Fig.2》

  Fig. 2. XRD spectra of MgHA and Mg-APTES disks.

The surface morphology of the MgHA-based samples was characterized using SEM and TEM; no significant morphological changes occurred on the Mg-doped HA following the chemical treatments for the surface silanization process (Figs. 3 and 4).

《Fig.3》

 Fig. 3. SEM images of (a) MgHA and (b) MgHA-APTES samples.

《Fig.4》

Fig. 4. TEM images of (a) MgHA and (b) MgHA-APTES samples.

《3.2. Conjugation of MgHA-APTES disks with MSCs homing factors》

3.2. Conjugation of MgHA-APTES disks with MSCs homing factors

Immobilization of the cell homing factors, FF III1-C or the GlyArg-Gly-Asp-Ser-Pro-Lys peptide sequence, onto the Mg-doped HA disks was achieved by classical coupling reactions between the amino groups exposed to the disk surface and the carboxylic functionalities from the peptide sequence, activated when EDC/ NHS were used as coupling reagents (Fig. 5). To test the effect of the concentration of cell homing factors on the cell homing behavior, both the FF III1-C and the peptide sequence were loaded at the two different concentrations of 10 µmol·L–1 or 100 µmol·L–1, thus affording two peptide-conjugated samples, MgHA-APTESCFP10 and MgHA-APTES-CFP100, and two FN-conjugated samples, MgHA-APTES-CFF10 and MgHA-APTES-CFF100.

《Fig.5》

Fig. 5. Scheme of the synthesis of MgHA-APTES-CFP and MgHA-APTES-CFF. Reagents and conditions: Gly-Arg-Gly-Asp-Ser-Pro-Lys or FF III1-C, EC·HCl, NHS, PBS, 3 h, 37 °C.

To determine functionalization reaction effectiveness,  TGA was used to confirm the presence of an additional organic moiety on the functionalized material. Fig. 6 shows the distinct shapes of TGA that are related to MgHA, MgHA-APTES, MgHA-APTESCFP100, and MgHA-APTES-CFF100. The degree of functionalization for each sample, shown as percentage of weight loss at 500 °C under inert atmosphere, reveals the increase of organic mass on the MgHA disk surfaces. A 5% weight loss was observed for MgHA-APTES, as compared with the precursor MgHA sample, while higher weight losses were observed for the peptideand FN-conjugated samples (8% for MgHA-APTES-CFP100 and 10% for MgHA-APTESCFF100).

《Fig.6》

                                                                                                              

Fig. 6. TGA profiles of  MgHA, MgHA-APTES, MgHA-APTES-CFP100, and MgHA-APTES-CFF100 samples.

To further characterize the covalent biofunctionalization of the MgHA disks with the peptide sequences, FTIR analyses were performed. Fig. 7 reports the FTIR spectra of unfunctionalized MgHA, MgHA-APTES, and MgHA-APTES-CFF100 samples. All the spectra show absorption peaks at 556 cm–1, 596 cm–1, and 1017 cm–1 of the phosphate matrix. In the MgHA-APTES sample, the presence of additional new bands at 2930 cm–1 (from the CH2 stretching)and at 1560 cm–1 and 1460 cm–1 (due to the N—H bending of the primary aliphatic amine) can be observed. For the MgHA-APTES-CFF100 sample, an additional peak at 1640 cm–1 (due to the C=O vibration) is observed. In addition, the peak at 3440 cm–1 may ascribe to the O—H vibration and the N—H stretching of the functional groups present on the peptide moieties.

《Fig.7》

Fig. 7. FTIR spectra of MgHA, MgHA-APTES, and MgHA-APTES-CFF100.

​​​​​​​《3.3. Preliminary in vitro biological evaluation》

​​​​​​​​​​​​​​

3.3. Preliminary in vitro biological evaluation

A preliminary biological evaluation of mMSC viability, 3 days after seeding, was analyzed by an MTT test (Fig. 8). The quantification of metabolically active cells, which were seeded into the inserts and placed in direct contact with the MgHA-CFP and MgHA-CFF disks, showed a decrease in stem cell number compared with the non-functionalized MgHA disk and the cells-only group; thus, the results suggested that cells migrated through the insert to the disks in response to the grafted cell homing motifs.

《Fig.8》

 Fig. 8. MTT test of mMSC, 3 days after the seeding into the inserts placed in direct contact with the disks. Cells-only group used as a control.

This study offers a platform that is based on the well-known osteoconductive MgHA, combined with tethered cell homing stimuli. It is commonly known that, in certain pathologies and particularly those related to aging (e.g., osteoporotic sites), the number of endogenous MSCs drastically decreases. Therefore, it is necessary to attract MSCs to the specific anatomic sites where they are strongly needed. Current pharmacological treatments, whether alone or combined with biomaterials (e.g., cements, granules, and 3D scaffolds), fail to restore patients’ mobility and quality of life, at expensive social costs. The proposed approach shows the possibility of grafting specific motifs involved in MSCs homing onto MgHA. The resulting functionalized biomaterials represent the building blocks for complex treatments through which it will be simultaneously possible to enhance endogenous MSC migration and provide a suitable substrate/environment for MSC adhesion, proliferation, and differentiation in specific bone cells (i.e., osteoblasts).

《​​​​​​​4.Conclusions》

4.Conclusions

In order to explore whether the incorporation of mimetic peptide sequences on Mg-doped HA may regulate MSC homing, we have reported the grafting of MgHA disks with two chemotactic/ haptotactic factors: either FF III1-C, or the Gly-Arg-Gly-Asp-SerPro-Lys peptide sequence, which is an FN analog that is able to bind to integrin. The cell homing factors, at concentrations of 10 µmol·L–1 or 100 µmol·L–1, were covalently linked to the disk surface by means of the APTES linker. Preliminary biological evaluation of mMSC viability, analyzed by MTT test, suggested that the stem cells migrated through the insert to the MgHA disks in response to the grafted cell homing stimuli. Although a deepened understanding of the complex pathways of biomolecules involved in MSC homing is necessary, this preliminary study opens up new opportunities to achieve effective therapeutic outcomes for bone tissue regeneration that can be translated into the clinic.

《​​​​​​​Compliance with ethics guidelines》

​​​​​​​Compliance with ethics guidelines

Alessandro Pistone, Daniela Iannazzo, Claudia Espro, Signorino Galvagno, Anna Tampieri, Monica Montesi, Silvia Panseri, and Monica Sandri declare that they have no conflict of interest or financial conflicts to disclose.